Used Wire O Binding Machine for sale (95,417)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 425004330, working width: 500 mm, type of input current: three-phase, overall weight: 1,300 kg, total height: 1,600 mm, total length: 3,300 mm, total width: 2,300 mm, Fully automatic binding line with a capacity of up to 2,100 cycles per hour! TECHNICAL DETAILS Mechanical cycles per hour: 2,100 Pitch: 3:1, 2:1 Binding thickness: 15 mm Binding element: 5.5 - 19 mm Min. binding width: 70 mm Max. binding width: 500 mm Min. unbound edge: 135 mm Max. unbound edge: 700 mm Binding process: Automatic Time required for diameter change: 20 min Format change without diameter change: 3 min MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 3,300 x 2,300 x 1,600 mm Machine weight: 1,300 kg Power requirements: 3/N/PE~400/230V 50Hz / 3.5 kW 3/PE~200/115V 60Hz / 3.5 kW EQUIPMENT Touchscreen-assisted setup process Simple and fast automatic machine setup via display Chjdpjxrb Uqsfx Acysd Easy product loading Closure tools (5/16, 9/16, 5/8, 7/16, 3/8 inch) Calendar hangers

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: BB-43, Wire-O Book binding machine. Chodpfx Acerzt U Tsyjd Automatic binding with 3:1 & 2:1 wires up to 1” (25mm) Excellent condition & ready for work.

Year of construction: 1995, condition: used, RSB 360: Semi Automatic SU 700: Standart Machine Chsdpfjgnh Scsx Acyed Punch dies available: 3:1, 2:1 ring wire, calendar, coil, plastic comb, tear-off perforation

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 Cjdpfsxf I D Eex Acyshd automatic wire threading can be seen in good working condition year 2002

Condition: used, Micomat 250 Chodpexc Tw Sefx Acyjd - 40-250A welding current - Shipping available at extra cost

Condition: used, gr. working width: 1100 mm for sheet thickness (steel sheet) up to approx.: 1 mm electr. drive: 380 V, 0,75 kW space requirement: 2330 x 600 x 1140 mm weight: 357 Cedpfx Acscaxvheyshd

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Chedpfx Ast Hw D Dscysd Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Cedpeiklxbsfx Acyehd Feel free to contact us.

Condition: new, Year of construction: 2024, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) Codpfx Asmk S Slscyohd This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; 4. intermittent welding with wire feeding – like with the TIG manual welding when you add manually electrode drop-after-drop. Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 000109, This small and inexpensive mobile multifunctional unit allows to carry out all operations required to process rigid hydraulic tubes: internal and external deburring, bending, DIN2353 rings pre-assembling, 37° flaring of stainless (AISI 316 TI) and carbon steel (ST 37.4) rigid tubes, Ø 6 to 42 mm and 4 mm thickness with fittings complying with the SAE and JIC standards. Chsdpjugvxfsfx Acysd

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 9710C365, workpiece weight (max.): 250 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, controller model: FANUC SERIES 16-W, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Travel distances Travel X-axis: 320 mm Travel Y-axis: 220 mm Travel U-axis: 120 mm Travel V-axis: 120 mm Chsdpfx Acoxnl Umoysd Travel Z-axis: 180 mm Max. workpiece weight: 250 kg Feed rate in X and Y axes: 900 mm/min In U, V and Z axes: 450 mm/min Table dimensions: 530 x 330 mm MACHINE DETAILS Control: FANUC SERIES 16-W Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,400 mm Weight: 3,000 kg EQUIPMENT Coolant tank

Condition: used, Year of construction: 2018, ∙ BQ-470 (2018) - USED - HORIZON BQ-470 (EVA) Total Counter: 609212 - AC-470L (Delivery Conveyor Long) - VS-470 (Smoke Extractor) ∙ Specifications Binding Modes: Binding with milling, Binding without milling, and Pad binding Number of Clamps: 4 Book Block Size (Top-Bottom x Fore-edge) Max. 320 x 320 mm Min. 145 x 105 mm Book Thickness: 1 to 65 mm (Book thickness may be limited depending on sheet weight, book size, and milling depth.) Cover Size: Max. 320 x 660 mm Min. 135 x 225 mm Cjdpfx Asxr S Arscyohd Cover Stack Height: Max. 150 mm Warm-Up Time: 60 min Cycle Speed: Max. 1,350 cycles per hour (EVA) Voltage / Frequency: 3-Phase 200V. 50 / 60 Hz

Condition: repair required (used), functionality: limited functionality, Thermal binding machine PLANAX COPY BINDER 2 In need of repair: Error code AC13. It is a mechanical fault. A motor continues running (although it should stop) after the binding process. The heating circuit appears to be functional. Sheet capacity: 5 – 330 sheets Format: Mainly up to DIN A4 (according to binding strip length) Machine dimensions approx. 355 × 588 × 283 mm (D×W×H) Weight: approx. 21 kg Chodpfexuifcox Acyjd Power supply: 230 V, 50 Hz, 400 W Warm-up/binding time Previous model: Warm-up time approx. 6 min; operating temperature approx. 143 °C Materials & Consumables Uses so-called “Copy Strips” – thermal binding strips made of 100% linen texture, available in various widths and colors. Price is generously negotiable. Price proposals are welcome.

Condition: ready for operation (used), Year of construction: 2001, Immediately available from small toolmaking workshop: Mitsubishi wire EDM machine Model W 21 FA - 1 Year of manufacture: 2001 Table load/workpiece weight up to 1,500 kg Traverses X/Y/Z: 500/350/300 mm Water bath machine Automatic wire threading Cjdsxud I Eepfx Acyehd Complete accessory package Price: EUR 4,000 plus VAT, ex works.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Travel (X/Y/Z): 350 × 250 × 250 mm Max. workpiece dimensions (X/Y/Z): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (450 kg) Max. taper angle: +/- 30°, 100 mm Travel (U/V): +/- 70 mm Automatic wire threading Wire diameters: 0.10–0.33 mm AGIE IPG generator with power supply module Machine dimensions (mm): Chjdext Rr Uepfx Acyod 1640 × 2040 × 2220 mm Machine weight: 3350 kg Bsw Nexqru Ss Hrdhsdi Cooling: external cooling required Best surface finish: Ra 0.2 µm Year of manufacture: 2006 Fully functional

Condition: used, Year of construction: 1979, weight 200 kg Chodpfx Acsvu Hldeyod 931855500

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, No reserve price – guaranteed sale to the highest bidder! Cjdoxnkblopfx Acyohd The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Work Table Table dimensions: 780 mm x 630 mm Table load capacity: 1,500 kg Taper: 10° / 150 mm U/V-axis travel max.: 30 mm Maximum workpiece dimensions: 1,050 mm x 800 mm x 295 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 mm x 2,460 mm x 2,100 mm Weight: 3,500 kg

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 2600 kg Control Unit Brand FANUC Model 18i-W Movement X-Axis Movement 520 mm X-Axis Rapid Traverse 900 mm/min Y-Axis Movement 370 mm Y-Axis Rapid Traverse 900 mm/min Z-Axis Movement 310 mm Z-Axis Rapid Traverse 900 mm/min V-Axis Movement 120 mm V-Axis Rapid Traverse 450 mm/min U-Axis Movement 120 mm U-Axis Rapid Traverse 450 mm/min This FANUC Robocut Alpha 1ia was manufactured in 2001. It is a wire EDM machine featuring a large stroke with X: 520 mm, Y: 370 mm, and Z: 310 mm. It can handle a workpiece mass up to 1000 kg and requires a power supply of 13 KVA. Consider the opportunity to buy this FANUC Robocut Alpha 1ia wire edm machine. Contact us for more information. Application Types EDM Cjdexq Hrlopfx Acyehd

Condition: repair required (used), Thermal Binding Machine PLANAX COPY BINDER 2 Needs repair: Error code AC13. It is a mechanical fault. A motor continues to run (although it should stop) after the binding process. The heating circuit appears to be functioning correctly. Sheet capacity: 5 – 330 sheets Format: Mainly up to DIN A4 (according to binding strip length) Machine dimensions approx.: 355 × 588 × 283 mm (D×W×H) Weight: approx. 21 kg Power supply: 230 V, 50 Hz, 400 W Warm-up/binding time: Previous model: Warm-up time approx. 6 min; Operating temperature approx. 143°C Materials & consumables: Uses Copy Strips – thermal binding strips made of 100% linen structure, available in various widths and colors. Manual unfortunately not available. Price negotiable. Offers are welcome. Chedpfx Acsxuicusyod

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Chsdpoxq Akwefx Acysd Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Travels (X / Y / Z): 350 × 250 × 256 mm Chjdpsxt Hz Ssfx Acysd U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Table Size: 620 × 400 mm Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Control System: AgieVision (ergonomic, touch display, 3D graphics) Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Machine Weight: approx. 3500–4000 kg

Condition: used, Year of construction: 1974, wire dia. 5 - 17 mm wire length max. 5.000 mm straightening feed stufenlos bis ca. 60 m/min Chedshtbfiopfx Acysd 11 kW, 380 V, 50 Hz 45 kW, 1480 U/min; 380 V, 50 Hz total wight ca. 15 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Cedpfx Acexni T Heyohd Worktable dimensions: 590 x 514 mm Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Machining time: 11,560 h Control total on-time: 65,288 h

Condition: used, Year of construction: 1989, serial number L169 Chodevu Hl Rjpfx Acyod output 6 kw ja seperat digital readout ja Wizard Puls50 Kühlwasseraufbereitungsei

Condition: used, Year of construction: 1999, max 70 mm Chjdpfsw Sygajx Acyod hydraulic ja