Shredder for die-cutting machine Bobst

RS TeamTech Sp. z o. o. RS-9

Condition: like new (used), functionality: fully functional, 1 new, high-performance knife grinding machine MVM KX 250 – 2100 mm (exhibition machine) * 1 year warranty • Siemens Touch Screen PLC 7" • Grinding wheel motor 11 kW, 15 hp, 400V-3-phase-50 Hz Itedpfx Asx Nhnhebnek • Grinding wheel diameter 250 mm • Magnetic rotary table 0 to 90 degrees • Width of magnet: 150 mm • Length of magnet: 2100 mm • Vernier dividing head for magnetic rotation +/- 90° • Quick-change clamping device for the grinding wheel (bayonet quick coupling) • Automatic feed controlled by Siemens PLC (0.001-0.1 mm) • Variable slide speed 1 – 30 m/min. • Automatic lubrication of the PTFE slide shoes • Coolant injection in the center of the grinding wheel, plus 2 nozzles on each side • External coolant tank with pump • Magnetic separator with discs for cleaning the coolant, with manual paper tape filter • Motorized quick-change flange enables fast tool changes • Variable grinding wheel speed • Bellows with magnetic attachment to the slide, covering the entire slide travel • Reversal of grinding wheel direction of rotation • LED lighting • Dimensions 4.12 x 1.50 x 1.75 m • 1 year warranty

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN Isdpohy Tp Djfx Abnjtk D-26345 Bockhorn/Grabstede, Germany

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, FEEDER PLUS System Adjustable operator-side clamping team with Centerline references, with control of the presence of sheets Operator-side pushing team opposite Double sheets detector Iodpfx Ajy D Ht Ssbnotk Centering and closing of the die-cutting equipment Waste trimming extraction station with quick tool clamping High stack exit Bobst CUBE II Above elevated by 35 cm. Blank preparation frame outside the machine Max format: 102x142 cm Min format: 50x70 cm Min paper weight: 80 g/m² Max cardboard weight: 2,000 g Max corrugated thickness: 4 mm. Max speed: 7,000 sheets/hour Max pressure 600 Tons Available September/October 2026

Condition: like new (used), Manufacturer: V. Randwijks Itjdpsg Snt Sofx Abnok Rotor Dia.: 500mm Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: Isdort Uvzspfx Abnstk - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Itsdpfsdtr A Tsx Abnsk Inspected and tested.

Condition: new, Funnel opening: 2,500 x 2,000 mm Rotors: 2 units Itjdpfx Aebq St Hobnok Rotor diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic locking system for sieve flaps to remove disruptive materials Weight: approx. 18,500 kg

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 850 mm - Machine weight: approx. 3500 kg - Tank capacity: approx. 110 liters - Hand protection grid in the area of the control panel and on the opposite side - Knife locking mechanism - Straight splitting table design - Documentation: 2 copies in German (1 printed, 1 on CD) Ijdpegl Adzefx Abnstk - Color: RAL 5012 - light blue - Protective grid/knife beam: RAL 1028 - melon yellow Machine in stock and immediately available Price and further information upon request.

Condition: new, functionality: fully functional, input voltage: 230 V, Cobot palletising solution Itoderbz Rxjpfx Abnek - Relieves employees from heavy lifting and monotonous physical strain - System can be configured and adapted to individual requirements - Requires less floor space than conventional palletising solutions (dimensions: 2,650 x 1,600 mm) - No stationary safety technology required, making UNIPAL easy and flexible to use - Dashboard for process overview - Up to 22 kg payload and 2,200 mm palletising height - Fast and easy retooling - Plug-and-play (requires 230 V mains supply) and 6 bar compressed air

Condition: refurbished (used), Herma semi automatic wrap labeller, Allen Hotfoil Encoder, with spares and manual, all mounted on stainless table, 1Ph Isdjib Dcrjpfx Abnstk