Used Wire Loom for sale (3,007)

Condition: refurbished (used), Year of construction: 2010, operating hours: 9,563 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,100 mm, total width: 2,800 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 4,440 kg, table length: 950 mm, GF CUT30P - 2010. Available for inspection at our premises in Semsales (Switzerland). Viewing by appointment. More information upon request. Itedpfx Ajyazkceh Esl

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,032 h, This 5-axis Sodick SLC400G was manufactured in 2014. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 250 mm. The machine also includes U/V travel of 150 x 150 mm. If you are looking to get high-quality wire EDM capabilities, consider the Sodick SLC400G machine we have for sale. Contact us for further details. • 5-AXIS: 5 • X-Axis: 400 mm Itsdez Akraspfx Ah Eel • Y-Axis: 300 mm • Z-Axis: 250 mm • U/V: 150 × 150 mm • Machine type: CNC Wire EDM • Year: 2014 • Made in: Japan • Machine connected and available for inspection/testing.

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year of manufacture 2007 Itjdpfx Ahsy Rxtks Eol with few operating hours It has a total operating hour counter, which indicates the total time the machine has been switched on. This shows approximately 4,500 hours; during this time, it performed actual wire EDM work for 70% of the time, which corresponds to approximately 3,100 – 3,500 actual operating hours. Wire EDM machine Sodick AQ 327L, year of manufacture 2006 Wire EDM machine Sodick AG 60L, year of manufacture 2020

Condition: good (used), Year of construction: 2017, operating hours: 494 h, functionality: fully functional, machine/vehicle number: 27026757, type of input current: three-phase, total height: 510 mm, total width: 300 mm, total length: 706 mm, input voltage: 400 V, ground cable length: 5,000 mm, overall weight: 100 kg, type of cooling: water, hose package length: 1,200 mm, electrical fuse: 35 A, open-circuit voltage: 73 V, welding current at 60% duty cycle: 360 A, welding current at 100% duty cycle: 320 A, input current: 26 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: type plate available, Fronius TPS 400i Pulse MIG/MAG welding system – complete with accessories For sale: Fronius TPS 400i Pulse professional MIG/MAG welding system, complete with wire feeder, mobile stand, and a comprehensive set of accessories. The Fronius TPS 400i Pulse is a professional welding machine suitable for a wide range of MIG/MAG applications. The machine features pulse welding and the ability to record welding data (datalogging). This datalogging is a built-in function of the welding machine and is not a separate accessory. Included with the machine: - Fronius TPS 400i Pulse Itodpezwhprofx Ah Ejl - Fronius wire feeder, without stand - Sturdy mobile stand for the power source - 1.2-meter intermediate cable pack, currently connected - 20-meter intermediate cable pack, supplied as extra - 8-meter Push/Pull welding torch - Wera torque screwdriver, for correctly tightening the push/pull wire feed rollers - Box with various wear parts, including contact tips, gas nozzles, and other accessories - Ground cable with welding clamp - Connecting cables and other cables/hoses - Other accessories as shown in the photos - Manual available digitally Versatile professional system The combination of the 1.2-meter intermediate cable pack, the supplied 20-meter intermediate cable pack, and the 8-meter Push/Pull torch makes this system highly versatile for welding aluminum, among other applications, and for larger structures or workpieces where the welding machine cannot be placed directly next to the workpiece, the set offers a great deal of flexibility. The built-in welding data recording/datalogging is of interest to professional users who value process monitoring, quality control, and traceability of welding work. The machine has been used and has normal signs of wear, but is in good and solid condition. Sold as a complete set as shown. Inspection and testing are possible by arrangement. Pick-up only, shipping not possible. A forklift is available.

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Machinetype: barbed wire machine Make: WAFIOS Type: STH2 Constr. year: 1981 Itodpfox Ea E Iex Ah Esl line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,5 mm output - meter/min: 25-38 Location: Europe

Condition: like new (used), Year of construction: 2017, operating hours: 4,602 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413 X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5462 Cat.:Used Mast:3F6000 Iedpfxozv H Sio Ah Eetl Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Year:2017 Hours:4602 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 54, functionality: fully functional, pressing force: 60 t, table width: 1,100 mm, table length: 3,000 mm, The machine is in like-new condition! Submitting a bid obligates you to pick up the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, and Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. Iodpfezzny Ssx Ah Eotl TECHNICAL DETAILS Punching force: 60 t Table size: 1,100 × 3,000 mm EQUIPMENT Setup operation Automatic operation Continuous operation Wiring diagrams Operating manual

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: D12E/8151, Offer Number: D12E/8151 Machinetype: wire nail press Make: ENKOTEC Type: NA05 SH Constr. year: 2011 diameter range: 1,8-2,5 mm nail length: 32-57 mm output - pieces/min: 2000 Location: Europe Itedpfewi Tl Ejx Ah Eol

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 370x270x255 [mm] - Travels on U/V axes : [mm] - Max. taper : +/-30/80 [°/mm] PART - Max. part dimensions : 700x600x250 [mm] Iodpfxsxqrqaj Ah Estl - Max. part weight : 500 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1930x2330 [mm] - Machine height : 2270 [mm] - Machine weight : 2165 [kg] MACHINE HOURS - Number of working hours : 15874 [h] EQUIPMENT - CNC : Fanuc 31i-WA - Cooling unit - Filtration unit

Condition: reconditioned (used), Year of construction: 2006, operating hours: 19,500 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, overall weight: 2,450 kg, Charmilles FI240SL, year 2006. The machine can be inspected at our premises in Semsales during April. The machine will be fully cleaned and serviced. Viewing available on request. Itodjylkr Tspfx Ah Eel

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Iedpfxezf Akys Ah Eotl Wire guides, 0.25 mm. Large bobbin kit.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D12U/8492, Offer Number: D12U/8492 Itjdpfozd U Riex Ah Esl Machinetype: wire nail press Make: WAFIOS Type: N61 Constr. year: 1994 wire diameter: 3,1-5,2 mm nail length: 13-150 mm capacity - pieces/min: 370 Location: Outside of Europe

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: D12E/8177, Offer Number: D12E/8177 Machinetype: wire nail press Make: WAFIOS Itjdpfxewi Tk Io Ah Eel Type: N61 Constr. year: 1986 wire diameter: 3,1-5,2 mm nail length: 13-150 mm capacity - pieces/min: 370 Location: Europe

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Itsdpfei A I Hfjx Ah Ejl Very little working hours. The machine is like new. There are two identical machines.

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump Itsdjvvl Uaopfx Ah Eol 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Year of construction: 1978, condition: ready for operation (used), Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible. Itjdpfxextpq Nj Ah Ejl

Condition: used, Year of construction: 1991, For sale 10x Jakob Müller Frick CH MVC 150 Müdata 4 Label Loom We only sell as a set for €50,000 Each loom €5,000 1989 in 12/30mm, To: 89.30018 Müdata 4, No. 70 1990 in 12/30mm, To: 90.30452 Müdata 4, No. 71 1990 in 12/30mm, To: 90.30370 Müdata 4, No. 72 1990 in 8/46mm, To: 90.30337 Müdata 4, No.325 1991 in 12/30mm, To: 91.30247 Müdata 4, No. 73 1990 in 7/57mm, To: 90.30166 Müdata 4, No. 76 Itsdpfjv T Nb Ssx Ah Eol 1990 in 7/57mm, To: 90.30461 Müdata 4, No. 77 1990 in 9/36mm, To: 90.30371 Müdata 4, No. 78 1990 in 9/36mm, To: 90.30080 Müdata 4, No. 79 1991 in 7/57mm, To: 91.30312 Müdata 4, No. 80 all looms are nice and well running

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,089 h, This 5-axis FANUC ROBOCUT alpha-1iD was manufactured in 2007. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, allowing for precise machining. The machine can handle a maximum workpiece weight of 1000 kg. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha-1iD machine we have for sale. Contact us for further details. • Machine weight: 3000 kg • Number of Axes: 5 • X-Axis: 600 mm • Y-Axis: 400 mm Itsdpfx Ahjz Aigvs Esl • Z-Axis: 310 mm • U-Axis: 200 mm • V-Axis: 200 mm • Table load: 1000 kg • Main electronic connection: 200/220 V, 3-phase, 50/60 Hz • Machine type: CNC Wire EDM • Year: 2007 • Made in: Japan • Rated power: 13 kVA • Machine connected and available for inspection/testing.

Condition: used, Year of construction: 2012, Automatic wire threading, Itedpfx Aszcdwweh Ejl Travel range: x 600 mm y 400 mm z 310 mm Includes cooler Machine is in excellent condition.

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Itodpfxjy S Ni Eo Ah Ejl Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring. Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Travel Y-axis: 250 - mm Year of construction: 2,004 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes Itedpozycakofx Ah Eel - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 8,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 3,700 kg, A demonstration machine is for sale. Travel range: X-axis: 600 mm Y-axis: 400 mm Z-axis: 300 mm U-axis: ±50 mm V-axis: ±50 mm Max. workpiece dimensions: 990 x 620 x 295 mm Max. table load: 550 kg Max. taper: Itedjza Eppjpfx Ah Eel ±21º / 100 mm Machine weight: 3700 kg Machine height: 2210 mm Machine dimensions: 2480 x 2980 mm Standard wire diameter: 0.15 to 0.3 mm Max. weight of wire spool (kg): 10 kg (P10) Surface quality: Ra 0.35 Capacity of the water system (l): 1000 Machine equipment: Transformer Windows CE touch screen controller Automatic wire threading (AWT) SD Master Tubular linear drive Collision protection X/Y/Z/U/V axes 0.1-μm resolution in the linear scale PC acrylic filter tank cover Standard remote box Water chiller Flush gun Protective door lock 3-filter water tank design CE conformity configuration Demineralized water tank

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20L/9019, Offer Number: M20L/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm Iedpox Edtcefx Ah Ejtl shaft length under head: 65 mm cutting length: 87 mm output pieces/min: 360 Location: In our warehouse

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* complete with an motorized wire decoiler Itodpfxsy Ehrfj Ah Eel table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: like new (used), Year of construction: 2020, operating hours: 3,431 h, load capacity: 1,250 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F6250 ID: 26077.5577 Category: Used Itodszv R Hdopfx Ah Eol Mast: 3F6250 Forks: 1200 mm Lowered height: 2920 mm Lifting height: 6250 mm Capacity: 1250 kg Year: 2020 Hours: 3431 hours Battery: Complete NEW * 48v / 750ah * Year of manufacture 2021 Options: - VNA truck - with wire guidance