Used Wire Flattening for sale (2,822)

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake Ledpfxoc Spnao Aftorp -Tool for: wire mesh, mesh wire -Wire division: 50 mm -Thickness: 25 mm -Drawing with the pictures -Total length: 550 mm -Total height: 194 mm -Weight: 20 kg

Condition: used, Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block Lrjdped A Hgksfx Aftep -Transfer in current condition as seen -Operation is missing a switching element (can be installed at an additional cost) -Motors tested: and ok -Rated load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Condition: used, Wire Electrode, Stainless Steel Welding Wire, Welding Wire -Big roll - Wire Thickness: 1.2mm -Wire electrode: highly alloyed, chemically resistant Lsded Elvvjpfx Aftjrp -Number: 4x rolls available -Price: per package -Weight: 12kg

Condition: used, wire electrode, welding wire, welding wire -Manufacturer: MTC, welding wire G 19 9 Nb Si 1.4551i -Type: MT-347 O1.2mm Lodpfxjftd Tns Aftorp -Dimension: O 300/110 mm -Weight reel: 15.7 kg

Condition: used, wire electrode, welding wire, welding wire -Welding wire: Avesta 316L-Si/SKR-Si -O: 1.2 mm Ljdpfx Ajff Aq Hofterp -Dimension: O 300/100 mm -Weight reel: 14.3 kg

Condition: used, Wire electrode, welding wire, stainless steel welding wire Lredpfx Ascbki Tjftjp -Net weight: 15 kg -Number: 2x package available -Price: per package -Weight complete: 15.6 kg/package

Condition: used, wire electrode, welding wire, welding wire -Manufacturer: Elga, started roll of inert gas wire electrode -Type: Cromacore DW-309L O1.2mm -Dimension: O 300 /105 mm Lodpfx Afjfw Rvtotorp -Weight roll: 5 kg

Condition: used, Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -swiveling -with gear motor: SEW type R53A -Power: 380 V 0.73 kW -Steel cable: Ø 5 mm, length: 13 m -Transfer in current condition as seen Lsdpfx Aod Nkryjftjrp -Motor: tested and OK -Dimensions: 930/300/H510 mm -Weight: 60 kg

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg Lredpfx Aecbki Uoftep -Number: 2x package available -Price: per package -Weight complete: 7.6 kg/package

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x packages available -Price: per package Lrodpfx Aschp Awjftop -Weight: 7.6kg/package

Condition: used, Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Bohler, started role inert gas wire electrode -Type: AVESTA Cored Wire FCW-2D 316L/SKR O 1.2 mm -Dimension: O 300 /100 mm -Weight reel: 11.9 kg Ljdsfw Rvwspfx Aftjrp

Condition: used, wire electrode, welding wire, welding wire Ljdpfxjchlyco Afterp -metal powder -cored wire -Net weight: 15 kg -Number: 87x packages available -Price: per package -Weight complete: 15.6 kg/package

Condition: used, Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Rope diameter: 5 mm Lodpfxsdvmblo Aftorp -Rope length: approx. 14000 mm -Cable length: 4500 mm -with: service -Dimensions: 370/330/H450 mm -Weight: 30 kg

Condition: used, MIG/MAG hose package for robots -Hose package with: wire feed for robots or automatic welding machines -Length: 3.4 m -Water cooled Ljdpfx Afofdd A Djtjrp -Weight: 5.5 kg

Condition: used, wire electrode, welding wire, welding wire Lrjdpfx Afsff Aq Ietop -Welding wire: Avesta 904L -EN: 12072 AWS A5.9/SFA 5.9 ER385 -O: 1.00 mm -Dimension: O 300/100 mm -Weight reel: 8.9 kg

Condition: used, Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys Ledpfx Ajcbkkbjftjrp -Net weight: 10.9 kg -Number: 1x package available -Price: per package -Weight complete: 11.5 kg/package

Condition: used, Wire electrode, SG2 welding wire, welding wire -Type: CuA18 Lrodpfx Afod I Hi Hotjp - Wire Thickness: 1.2mm -started role -Weight: 3kg

Condition: used, Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package Lsdpfxsf D A Abj Aftjrp -Dimensions: 750/410/H430 mm -Weight: 32 kg

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching. Lredpfx Afozhi Uwetep

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Ljdpezkivtofx Afterp Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Year of construction: 2007, condition: ready for operation (used), A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Ljdpfezka Nwox Aftorp

Condition: used, This is an Orthodyne 20 wire bonder, used for precision electronics assembly. The device is equipped with a microscope for detailed inspection during operation. These machines are often used for ultrasonic bonding in the semiconductor industry. The Orthodyne Model 20 is a manual ultrasonic heavy-wire wedge bonder primarily used for connecting power semiconductors (power devices), hybrid circuits, and power electronics with aluminum wire. Key specifications Property Specification Bonding method Ultrasonic wedge bonding Wire material Aluminum Wire diameter 4–20 mil (≈ 102–508 µm), depending on configuration Commonly used wire sizes 5 mil, 10 mil, 12 mil, and 20 mil Maximum bonding force Up to 1000 grams Ultrasonic power Up to 550 (machine setting) Working area Vacuum chuck with approx. 75 mm working diameter Operation Manual, under microscope Microscope Stereo zoom optics, typically 7×–40× depending on the model Applications IGBT and MOSFET modules Power hybrids DCB substrates Ceramic substrates (Al₂O₃, AlN) Thick aluminum bond wires for high currents Features Lsdpfxjzi Ap Do Aftorp Suitable for large aluminum wires up to 20 mil. Special Larrison bonding tools reduce wire damage and heel cracking. Automatic wire cutting during the second bond. Optionally available with deep-access clamps and a video camera for improved positioning.

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, Equipment: cooling unit, documentation/manual, Sodick AQ 300 L operating hours: 16906 year of manufacture: 2007-11 linear servo control x, y, z 300 x 200 x 200 mm u, v 80 mm wire diameter 0.15-0.3 mm (0.25 mm installed) max. workpiece dimensions 740 x 440 x 200 mm (x, y, z) max. workpiece weight: 300 kg Lredpfszgu I Tex Aftjp chiller deionization cartridge complete documentation machine is powered on for inspection

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller Lrodszgu Igopfx Aftsp option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: used, Decoiler, Powered Decoiler, Alfred Kullak (Solingen) Industrial Wire Decoiler, Used Machine Manufacturer: Alfred Kullak (Solingen) Type: Drahtablaufhaspel (Decoiler) Overall dimensions: Width: 1650 mm Depth: 1110 mm Height: 1670 mm Coil size: 340–1030 mm Load capacity: 500 kg Lsdpfx Aey Sgghsftorp Operating mode: Powered, control arm (dancer arm) controlled system Electrical data: 400 V