Used Wire Erosion Machine for sale (66,116)

Year of construction: 2016, condition: used, overall weight: 4,200 kg, total length: 2,900 mm, total width: 3,260 mm, total height: 2,200 mm, workpiece weight (max.): 3,000 kg, FANUC ROBOCUT α-C800iB Wire EDM Machine Technical Specifications: Max. Workpiece Dimensions: 1,250 × 975 × 300 mm Isdpfx Ahez N Nuxeyeih Max. Workpiece Weight: 3,000 kg Wire Diameter: 0.10–0.30 mm Max. Taper Angle: ±30° / 150 mm Max. Wire Spool Weight: 16 kg Travel X-axis: 800 - mm Travel U-axis: 200 - mm Dimensions (LxWxH) approx.: 2900 x 3260 x 2200 mm Component weight max.: 3,000 kg Control: FANUC Series 31i-W Model B Travel Y-axis: 600 - mm Travel V-axis: 200 - mm Weight approx.: 4,200 kg Travel Z-axis: 310 - mm Year of construction: 2,016 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder Iiedpfx Ahein Rn Asyoh -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM Iisdpfx Ajy Twg Ushyoh MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Maximum workpiece weight: 3,000 kg. Iiodpfxjzbimhj Ahyoh Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.

Condition: ready for operation (used), A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible. Ijdpfoyvuuzjx Ahyoih

Year of construction: 1994, condition: used, functionality: fully functional, Perfectly functioning EDM machine AGIE-ELOX MONDO 1/35A Isdpfoygq D Esx Ahyoih

Condition: excellent (used), Table 600 x 450 mm Work piece 650 x 580 x 250 mm Work piece weight max. 400 kg C-axis spindle speeds 60 rpm With pallets changer Ijdpfozi Nnmsx Ahyeih With tool changer Working head for 3 dimensional operation Misc. accessories MARCELS MASCHINEN AG

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] EQUIPMENT - CNC FANUC 16W control - cooling unit - cooling tank with pump Iodpfxjuhcbco Ahysih - automatic threading

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min Iedpfx Asxd R Hmjhyeih - Rapid traverse on U, V axes: 450 mm/min - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Iiodsw Spa Nepfx Ahyjh Wire Eroding Machine AGIE - Agiecut Progress 3

Year of construction: 2016, condition: used, overall weight: 4,500 kg, total length: 3,760 mm, total width: 3,000 mm, total height: 2,750 mm, Wire EDM System GF AgieCharmilles CUT 2000 with loading robot (WorkPartner) General Information Machine type: CNC wire EDM machine with automation Model: CUT 2000 Automation: GF WorkPartner loading robot Control: Vision 5 (Windows XP) Generator: AGIE IPG-V high-performance generator Operating Hours Power On:  91,716 h Work On: 17,889 h Working Area / Travels X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm U/V Axes Travel: ±70 mm Workpiece Data Max. workpiece size (W × D × H): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (standard), 400 kg (optional / bath load) Working table: 700 × 450 mm Machining Parameters Taper: 30° at 100 mm workpiece height Available wire diameters: 0.10 – 0.30 mm Best achievable surface finish: Ra 0.05 µm Wire threading: automatic Dielectric System Dielectric capacity: 700 liters Flushing: coaxial flushing system Cooling: external cooling required Automation Loading robot: GF WorkPartner Automatic loading and unloading Depending on magazine configuration, total handling weight can be approx. 400–800 kg Description The system consists of a CNC wire EDM machine GF AgieCharmilles CUT 2000 equipped with an integrated WorkPartner loading robot. The machine is designed for high-precision contour cutting with excellent surface quality and stable process performance. Features such as the automatic wire threading system, integrated dielectric unit and coaxial flushing enable reliable unattended operation. The WorkPartner robot expands the machine into an automated manufacturing cell, allowing longer machining cycles and significantly increased productivity. Weight approx.: 4,500 kg Dimensions (LxWxH) approx.: 3760 x 3000 x 2750 mm Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Iiodoz Ivcrjpfx Ahyeh Terms of delivery: Free loading on truck under power: No

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm Isdjzrh N Uepfx Ahyeih u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 3,000 mm, total width: 2,300 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servo motors Glass scales in X and Y axes Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator Ijdpfxozhvhws Ahyeih CNC control: FANUC compatible 15“ TFT touch screen monitor Handheld remote control Automatic wire threading with thermal wire cutting, Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 230 x 300 x 200 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: € 2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF AgieCharmilles CUT 1000 Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Ijdpfx Aoz I Ni Sehyjih Max. taper: 3° at 80 mm height Wire diameter from 0.02 mm to 0.20 mm (including optional KIT F20) Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15" LCD color screen with jog wheel and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, overhauled, and thoroughly tested by our specialists. We will gladly commission the machine at your facility and provide training on the control system and machine operation.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 24,731 h, functionality: fully functional, machine/vehicle number: W120273, Wire EDM machine Makino DUO43 Year of manufacture: 2011 Travel ranges (X/Y/Z): 450 x 300 x 320 mm Travel ranges (U/V): +/- 101 mm Iijdpfozudqyox Ahyjh Max. workpiece dimensions: 710 x 560 x 300 mm Max. workpiece weight: 800 kg Available wire diameters: from 0.10 to 0.30 mm Max. spool weight: 16 kg The machine was recently in operation at our customer's site and can be inspected while powered on.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Iijdpfx Asy Irdkohyjh

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm Iedpfxox Hghus Ahyeih incl. chiller Automatic wire threading Water bath

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Iijdpfx Ahjy R Dtceyeh

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Equipment: fridge, AGIECHARMILLES CUT 30 WIRE EDM MACHINE, YEAR OF MANUFACTURE 2011 TRAVEL: X 600, Y 400, Z 350, U/V ±50 MM MAXIMUM TAPER: 25°/80 MM AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT: 350 MM WIRE SPOOLS UP TO 25 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS Iisdpfx Ahsy Tw Tbjyjh COOLING UNIT TEST CUT POSSIBILITY

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X 650 Y 400 Z 420 U/V +/- 101mm, Table 901 x 660mm, max load on table 1,200kg. Iiodszzmkijpfx Ahyjh

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Iisdewqgh Aspfx Ahyoh Tank Dimensions: W 790 x D 590 x H 320mm Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] Iodpfsy Tzc Tox Ahyjih - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: good (used), Year of construction: 2018, 1 used CNC wire EDM machine Make: Sodick Model: AQ 750 L, year 2002, overhauled by Sodick in 2018 4000 operating hours since overhaul Control: MARK 30 LN 1 W Wire threading: 97 Pipe AWT Iisdpfxsyknpgs Ahysh

Condition: excellent (used), Type ER 9-0.8, wire range 0.5-0.8 mm Iodpfx Ahszvdc Eoyjih as-new devices, several available.

Year of construction: 1995, condition: used, Wire diameter: 0.4-1.5mm, control: MCS SYSTEM V, an on-site inspection is possible. Iodpfx Ahoz E Nrhsyoih