Used Wire Drawing for sale (4,524)

Condition: new, functionality: fully functional, Year of construction: 2024, STAHL CRANE SYSTEMS SH5025-20 4/1 L3 Wire Rope Hoist Machine Lifting Capacity: 10 Tons Lifting Height: 10 Meters Machine Axis: 1400 mm Lifting Speed: 0,8 / 5 m/min Hnsdpfsyl Ti Isx Ahvji

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Hnjdpjv Dkvrsfx Ahvji Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. Hodpfxsgzv Scs Ahvsni We are also happy to offer you commissioning and training

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress VP4 Year of manufacture: 2012 Travel paths: X = 800 mm, Y = 550 mm, Z = 525 mm Travel paths: U = 800 mm, V = 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Hjdpfxeyir N Ue Ahveni Submerged-type wire EDM machine with automatic wire threading and re-threading after wire breakage Including automatic front door Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and fully overhauled after order confirmation. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered on request.

Year of construction: 1972, condition: used, functionality: fully functional, machine/vehicle number: TRFA12+14x, 1x Demag friction wheel drive travel drive for rope hoist crane hoist P-train bridge crane etc Hnjdpfxjt Rtm No Ahvoi Stock from years of construction 1971 + 1976: 14x RF310 - motor type 16/6KF8-2 0,15-0,6KW 5m/25m/min price 2850.- / pc. 12x RF400 - motor type 19/11KF12-2/2 0,18-1,1KW 6,3m/40m/min Price 3650.- / pc. with 2 speeds Complete with tension clamps, motor/gearbox and friction wheel We can also overhaul defective, porous friction wheels for you and have new ones made - please enquire. Weight complete approx. 100-150 kg, connection to 380V 50Hz Used condition Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Mitsubishi wire-cut EDM machine FA20-S advance, year 2011, fully functional. Can be inspected under power. Hodpfeylyhkex Ahvsni

Condition: good (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 2,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,380 mm, Charmilles Robofil 690 - Maximum part dimension 1380 x 1000 x 400 - Travels X,Y,Z 800 x 600 x 600 x 400 - Travels U,V ±30 - Maximum demoulding ±15/110 - Global protection by EC-EMC cabinet - Fixed work table - Integrated monobloc flange table - Guaranteed thermal stability; polymer concrete - 5 axes controlled by numerical control (XYUVZ) - Linear glass rulers on all axes - Axis protection by anti-collision system - Tilting up to ±30°. - ThermoCut (automatic threading and rethreading) - Bonina thread holder 4, 8 and 16Kg - Filtration system: 2 filters (29m2) - Water/water heat exchanger - Automatic regulation of deionization with cylinder - Numerical control CT Millenium (Fanuc) - 12" TFT color graphic touch screen - Hard disk 10GB - Remote control - Machining strategy PROFIL-EXPERT - Integrated CT-EXPERT technology - Automatic adaption of the PILOT-EXPERT generator - Digital generator control - Autorestart - Self-diagnosis - Integrated Ethernet card Additionals: Contact electrode Hnedpfx Ahjwz Iuxsvei Pinch roller Chiller Spare motor for U/V axis

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings - Documentation available: Yes - CE certificate present: No Hjdpfx Aex Igc Ujhveni - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), Year of construction: 2006, operating hours: 19,500 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, overall weight: 2,450 kg, Charmilles FI240SL, year 2006. The machine can be inspected at our premises in Semsales during April. The machine will be fully cleaned and serviced. Viewing available on request. Hjdpfxjylkr To Ahveni

Condition: excellent (used), Wire straightening machines, wire straightening devices Straightening machine, straightening device Various straightening machines are available Manufacturers: Witels Albert, GeDe, RiTeBo, etc. Please contact us for details. Hnsdpfoylhblox Ahvoi

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Hodpei A I Hfjfx Ahvsni Very little working hours. The machine is like new. There are two identical machines.

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm Hjdpfx Ahovvl Uajvjni X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm Hnsdeul Uwlopfx Ahvji No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: refurbished (used), Year of construction: 2017, operating hours: 3,751 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, feed length Y-axis: 3,300 mm, GF CUT200SP, year 2017. Machine available at our Semsales premises in April. The machine will be fully cleaned and serviced. 0.1 mm option. Wire chopper. Hnjdpfx Ahsyk Upaevji

Condition: new, Year of construction: 2026, The dual wire feeder has been designed to increase the efficiency and quality of welding processes in the most demanding industrial environments. Thanks to its innovative design that allows the use of two different types of welding wires, this feeder is the ideal solution for CORMAK laser welding machines, offering users a number of benefits. Dual wire feeder for CORMAK laser welding machines The dual wire feeder is the choice that allows for significant improvement in work standards, while offering the flexibility, efficiency and reliability necessary in modern production processes. This solution meets the expectations of even the most demanding users looking for ways to optimize their IMPROVED PRODUCTIVITY - The dual wire feeder reduces machine downtime associated with spool changes, contributing to faster and more efficient production cycles. VERSATILITY - The dual wire feeder allows for quick adaptation to changing project requirements. Hnodewl Ewxspfx Ahvsi PROCESS OPTIMIZATION - Users can easily switch between wires with different diameters or properties to tailor the welding process to specific tasks, ensuring high weld quality and work efficiency. IMPROVED WELD QUALITY - By allowing for dual wire to weld material, the feeder provides better alignment at larger gaps, resulting in longer lasting and cleaner welds. REDUCE OPERATING COSTS - Long-term benefits such as reduced downtime and improved work efficiency allow for significant savings.

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Hnsdpoyg Dl Aofx Ahvoi Leadscrew and feed shaft lathe Voest Alpine DA180 Max. swing over bed: 380mm Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition.

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Hnsdpfxoxvdmde Ahvei Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 7160, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1Q50R Hedoiiilmjpfx Ahveni Serial-No. 7160 Armlänge / Arm length 55cm Fußpedal / Foot pedal Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 19142, Wire Stiching Machine Polygraph 703 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hnjdpfx Ash Axw Tohvoi Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Drahtheftmaschine - Wire Stitching Machine Polygraph 103Serial-No. 6875 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hnodpfx Ajh Ax Ufehvji

Condition: used, Year of construction: 1999, machine/vehicle number: 45037, Drahtheftmaschine / Wire Stitching Machine Polygraph 703/1T1-head wire stitcher for block- and saddle stapling. Year 1999 - Serial-No. 21/4 Online-Video-Inspection by Skype-Video Hnodeh Aygbspfx Ahvsi We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hodpfx Asn Apntohvoni

Condition: used, machine/vehicle number: 8170126, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1L75FR Serial-No. 8170126 Armlänge / Arm length 75cm Fußpedal / Foot pedal Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hnedpeiiilqefx Ahvei Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1992, machine/vehicle number: 190121, Wire Stitching Machine AGRAFIX BX1-head wire stitcher for block- and saddle stapling. Year 1992 - Serial-No. 190121 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hnodpfx Aoh Ayf Tehvsi Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1994, condition: used, Technical details: plate thickness: 1,0 mm tube diameter: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm wall strength: 0,6 / 0,7 / 1,0 mm tube pipe draw up length: 150 - 1000 mm control for program: SPS Simatic S 5 air pressure - required: 5 bar voltage: 380 V control voltage: 24 V total power requirement: 3,5 kW dimensions L x W x H: 1,2 x 1,0 x 1,6 m Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1.0mm Hedpfx Asu Icv Ashvoni workpiece length 150 - 1000mm div. Zubehör/Werkzeuge Ø 120 und Ø 130 und weiteres, wie im Foto *