Used Wire Drawing Line for sale (13,822)

Year of construction: 2004, operating hours: 24 h, condition: used, functionality: fully functional, Full wahing & drying line for Spinac, Arugula and other leaves vegetables, line inluded: -Turatti Blowing washer with jacuzzi effect for arugula, spinach, 1500x 4500 cm, huge capacity per hour 500-1500 kg/hour -spinner FMT -transporters Koderrvx Nepfx Ad Nowt We also have metal detector for good monies

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Kwsdjw R T Diopfx Ad Net Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Our Dornow potato peeling line is for sale, consisting of: Kwedpfow Sfg Ejx Ad Net Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: excellent (used), The line includes: - three stone removers - a roller grader Ksdpoycqbiofx Ad Nowt - a pit scraper - a screw conveyor for pits The machines have only worked for three seasons and are in very good condition. The price refers to all machines.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with 3 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included in delivery, as is first-class service. The ultra-affordable entry into laser cutting technology - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approx. 3.0 x 3.0 meters of installation space - Top quality, book a viewing appointment now! Cutting capacity: - Steel sheet up to 22 mm - Stainless steel sheet up to 12 mm - Aluminum sheet up to 8 mm Kwsdpfxsyacw Rs Ad Net - Travel range approx. 1300 x 1300 mm - Table size: approx. 1300 x 2500 mm (fits a full medium-format sheet) - German-language machine control - Manual front door - Comprehensive collision protection measures - Large front window for cutting process observation - Automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter database - Incl. nesting module - Very easy to operate - Powerful laser chiller Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland. Approximate machine dimensions: Width: 3.2 m Height: 2.3 m Length: 3.3 m Total weight: approx. 3,000 kg Leasing or hire purchase is available through our financial partner. Need a different laser power, table type, or table size? No problem. I am happy to prepare a tailored offer. Not sure which laser power is right for your application? I will of course carry out cutting trials according to your requirements. Anything is possible—from 0.5 kW up to 20 kW laser power.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, table length: 2,070 mm, table width: 1,070 mm, working length: 2,000 mm, working width: 1,000 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 100 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Offered here is a high-precision laser cutting machine with 3000 watts of laser power Type: LG-1020/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching system (pressure and gas type controllable through software) Cutting with N2, O2, or mixed gas (compressed air) - Automatic front door - Machine bed lined with fireclay - Machine bed and axes measured and calibrated with Renishaw interferometer Our goal is to offer the best, most reliable, and cost-effective laser machines currently available on the market. Our machines are ideal for workshops and repair operations. A perfectly developed cutting parameter library is included, as well as first-class on-site support. Brand new machine, delivery time approx. 6–8 weeks We would be pleased to demonstrate the machine at our facility. Traverse path: approx. 1000 x 2000 mm Table surface: approx. 2070 x 1070 mm (accommodates a small format sheet inside the machine) Pull-out cutting table For ultra-precise metal cutting Fully installed and calibrated Cutting software in German Incl. nesting module Very easy to operate Switch on and start working Laser source by Max Photonics (G5/German version) with 3000 watts output Extensive electronic and mechanical collision protection for the cutting head Large laser safety window on the front door Automatic front door Safety light curtain for maximum operator protection Cuts stainless steel up to 12 mm Cuts steel up to 22 mm Cuts aluminum up to 12 mm Cuts brass up to 5 mm Heavy-duty industrial quality Complete system / ready to use LED work area lighting 200 mm duct connection for fume extraction Kjdpeyacwkofx Ad Nowt Incl. extraction fan Leasing or hire purchase available via our financing partner Need a different power rating or table size? No problem—we have various machines in stock or available at short notice. Sale to commercial customers only. Delivery, consulting, and sales only in Germany, Austria, and Switzerland Machine dimensions (approx.): Width: 2.9 m, Height: 2.1 m, Depth: 3.3 m Weight: approx. 2.5 tons

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 3kW fiber laser Delivery time approx. 8 weeks Our commitment is to offer highly precise, long-term stable, and yet cost-effective laser machines. Our machines are ideal for workshops and repair shops. A thoroughly developed cutting parameter library is included as well as exceptional service. - Includes 2D bevel-cut function for weld seam preparation or production of countersunk holes (see image) - Machine without automatic shuttle table! Loading is carried out from the long side of the machine - Very space-saving - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.5 meters floor space - 3kW laser source by MaxPhotonics (G5/German version) - Laser generator with socket efficiency better than 30% - Suitable for aluminum - Top quality, schedule a viewing now! Cutting capacity: - Steel up to 22mm (max.) - Stainless steel up to 12mm (max.) - Aluminum up to 10mm (max.) - Brass up to 8mm (max.) Kwedpjyacqwefx Ad Net - Travel range 1500 x 3000mm (for large formats) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection for the cutting head - Large laser protection windows for monitoring the cutting process - Comprehensive cutting parameter file - Includes nesting module - Very easy to operate - Powerful laser chiller - German language machine control - German service and spare parts supply - Powerful laser chiller - Optional filter extraction system available (5.5kW with frequency converter for pleasantly quiet operation) Leasing or hire purchase possible through our financing partner Sale exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland Approx. machine dimensions: Length: 4.0 m Height: 2.3 m Width: 4.5 m Total weight: approx. 4500 kg Need a different laser power, table type or table size? No problem. I'll gladly provide a suitable offer. E.g. 2kW machine from 29,990 EUR Not sure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: excellent (used), Drilling machine for turned components Triade Number of drilling units: 3 Drilling depth: 100 mm per side Kedpoyabz Iofx Ad Njwt

Condition: used, Year of construction: 2004, Sealing bar length 2500 mm Maximum width of upper reel 2400 mm Maximum width of lower reel 1450 mm Width of conveyor belt 1300 mm Length of entry belt 4800 mm Ksdpfx Aewh A Hcod Njwt Maximum useful height 800 mm belt speed 5-25 m/min with inverter heat shrink tunnel kw 50

Condition: good (used), Year of construction: 1995, table height: 950 mm, total height: 3,800 mm, table width: 1,250 mm, table length: 1,000 mm, installation height: 900 mm, pressing force: 120 t, total length: 2,100 mm, total width: 2,050 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, retraction force: 5 t, stroke length: 400 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Kodpfxjycin Uj Ad Nowt

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Table dimensions: 700 x 450 mm Z-axis travel: 255 mm Kwodpfoycidpex Ad Not Y-axis travel: 250 mm X-axis travel: 350 mm MACHINE DIMENSIONS: L: 2100 mm x W: 2000 mm x H: 2200 mm

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Pallet conveyor line with turntable and two pallet outfeeds – 55 m. Conveyor – 6 m. Turntable – 1.5 m. Pallet outfeeds – 2.5 m. The system is designed for pallets measuring 120x80 cm and 120x100 cm. The system is fully operational, without automation or control system. Kodpjychacofx Ad Nswt

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) Kodpfx Adjwv Trls Nowt 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: like new (used), The machine is in continuous operation, with a capacity of 45,000 bottles of 500 ml per hour. I also have a 500 ml can line with a capacity of 45,000 cans per hour. Kwjdpfxoycgnfo Ad Njt

Condition: excellent (used), Year of construction: 2010, operating hours: 16,712 h, Sodick AG 400 L Premium in very good condition year of manufacture 2010-11 Kedox Aix Espfx Ad Newt x, y, z 400 x 280 x 250 mm u, v 120 x 120 mm max. workpiece height 240 mm internal tank dimensions 866 x 626 mm max. workpiece weight 500 kg max. taper 25 degrees 0.1-0.3 mm wire can be used (0.25 mm installed) chiller wire chopper quick-clamping system smart grip automatic wire threading complete documentation many accessories machine is under power for inspection.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. Kwsdpsycfw Ejfx Ad Njt After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Kjdpfxetxnp No Ad Njwt

Condition: good (used), Year of construction: 2017, Datasheet: en-datasheet-robocut-ds-c600ib     FANUC ALPHA C600iB – 2017 Wire Cutting EDM Machine Standard specifications – Maximum workpiece dimensions: 1050 × 820 × 300 mm – Maximum workpiece weight: 1000 kg – XY axis table travel: 600 × 400 mm Ksdjyccqiopfx Ad Nswt – Z axis travel: 310 mm – UV axis travel: 200 × 200 mm – Maximum taper angle: ±30° / 150 mm – Minimum step increment: 0.0001 mm – Wire diameter: Ø 0.10 to Ø 0.30 mm – Maximum wire weight: 16 kg – Footprint (W × D): 2440 × 2680 mm – Machine weight (approx.): 3000 kg – Controller: FANUC 31i-WB – Part program storage size: 4 MB Acoustic noise level – LPA: 64 dB – LPCpeak: 81 dB Optional equipment Z axis 400 – Z axis travel: 410 mm – Maximum workpiece dimensions without automatic front door: 1050 × 820 × 400 mm – Footprint: 2790 × 2680 mm Automatic front door – Maximum workpiece dimensions: 1050 × 775 × 300 mm 45° die guide – Maximum taper angle: ±45° / 70 mm 30 kg wire feed unit – Maximum wire weight: 30 kg

Condition: excellent (used), BONGARD Baguette line complete Weigher with double outlet Bongard Round weaver Intermediate cabinet with automatic insertion and basket Kedpfxeghwivj Ad Nswt Outlet on long kneader with table in front adjustable for baguette and white bread width 2,20 m height 2,40 m and depth 2,20 m we will dismantle the line and assemble it at your place. we are looking forward to your call Connection 16 Ah

Condition: used, Year of construction: 2017, zpracování slabé hmoty - délka výřezů od 1300 - 4500 mm - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti 137 / 5 000 Výsledky překladu Kedpfjnqzkpox Ad Nowt Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW

Year of construction: 2017, condition: used, processing weak matter Kodjnwm R Njpfx Ad Nswt - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW.

Condition: good (used), functionality: fully functional, RONDO accessories for pastry line (fine pastry/cutting and filling unit) A total of 18 well-maintained tools 5 various croissant or horn rollers 1 decorating roller, 1 double + 1 single folding shoe 3 croissant cutters of various sizes 1 pizza/round cake roller, 1 guillotine blade 5 cutters (oval, 2x donuts, puff pastry pockets) Kwsdjycb Ruspfx Ad Not 1 filling device with 6 outlets, start track for pastry Complete set for sale, includes storage trolley (see photo)

Condition: new, Year of construction: 2025, Brand new- Case packing machine- MECO LP 400 - Ready for immediate delivery This line was created to pack long and narrow products. Boxes dimensions: Lenght from 200mm to 4000mm Width from 80mm to 350mm Thickness from 60mm to 300mm Kwedpfxow Idxre Ad Nst Machine operating cycle: PHASE 1 Loading the cardboard and material. PHASE 2 Box forming around the product. PHASE 3 Closing the upper flaps and gluing Before • Precarious packaging • Not eco-friendly • Transportation and storage problem • Production subject to the operator • Labor cost • Poor quality perception After • Protective packaging for the product • Ecological as it can be disposed of in paper • Easily stackable and transportable • Guaranteed production • Labor saving • Improved brand image and perception of quality

Condition: like new (used), Year of construction: 2022, Line suitable for automatically closing boxes 'just in time' according to FEFCO standard 410. The line is self-sealing regardless of box size avoiding tooling time. Kwodpstwlhaefx Ad Nst Capacity 6.5 boxes/min. For more technical data see attached photo sheet or contact us.

Condition: used, Guard Rail Roll Forming Line: Kjdpfjxnmmqsx Ad Nowt • The production line for road safety barriers consists of: • Accessories and rollers for the production of 2- and 3-wave guard rails • Bending machine for 2- and 3-wave profiles • 19-station roll forming machine, complete with rollers and motorization • No. 3 punching stations • No. 1 cutting station • No. 7 hydraulic power units • No. 1 station with feeding rollers