Used Wet Stone Saw for sale (8,461)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting diameter: round 510 mm, square 500 x 500 mm. Saw blade: 6400 x 54 x 1.3 mm. Cutting speed: 25 - 235 m/min (adjustable via control). Machine weight: 3000 kg. Incl. chip conveyor. Credsxdcgrepfx Abuoh

Condition: new, – Semi-automatic – Hydraulic – 2 speeds – Double mitre – Saw pressure hydraulically adjustable – Cooling – Saw blade 2730 x 27 x 0.9 mm – Foot control Crodpfsh Razfex Abuoh – Emergency stop – Documentation – 400V

Condition: like new (used), Year of construction: 2013, Power of the main motor 5.5 kW Engine speed 2 870/min. Diameter of suction ports 100 + 100 mm Dimensions of the table 1 185 x 500 mm Height of the table 892 mm Spindle diameter 30 mm Saw blade tilt 0° ÷ 45° Undercutter motor power 0.5 kW Spindle diameter (undercutter) Ø 20 mm (3/4") Cjdpforft Taox Abusrh

Condition: used, Year of construction: 1992, functionality: fully functional, Panel Saw Spindle Moulder Combination Machine Table Saw Circular Saw Joiner's Saw Panel Saw Table Spindle Moulder Tilting Spindle Moulder FELDER Model: KFS37 FL Year: 1992 Sliding Table Length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 75 cm Extension table with extendable crosscut fence Mitre fence Main motor power: 4 kW Tilting Spindle Moulder Manual height adjustment of the tilting spindle Manual tilt of the spindle moulder up to 45° to the rear Spindle diameter: 30 mm 3 speeds adjustable via belt Cjdpfxoxkyd Ue Abuerh Spindle can be lowered under the table and removed Moulder motor power: 4 kW Moulder fence with fine adjustment on both fence jaws The machine is equipped with a transport carriage and lifting bar, making it very easy to move. Prior inspection is expressly recommended; simply leave your telephone number by email and I will get back to you to arrange a viewing appointment. Subject to prior sale; all information provided without guarantee. Machines can be collected personally or shipped by freight carrier at the buyer's expense. Loading and/or packaging can be organised by us. The shipping costs indicated are a guideline; they may vary depending on distance and unloading options. Please inquire for details. The item is offered under the margin scheme (differential taxation). The stated price is the gross final price. An invoice including VAT is not provided. Warranty terms: Due to age and wear, the sale is only to commercial buyers, with no warranty, guarantee or right of return. All information provided without guarantee. By placing a bid, the buyer acknowledges these terms.

Condition: used, GRAULE AGT pull and table circular saw Cjdpfxsxf Tr Us Abusrh

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Csdpfxsxiza Uj Abusrh

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Crsdpfow Sy Ukjx Abueh

Year of construction: 2010, condition: ready for operation (used), General Data Credexf N S Rjpfx Abujh Measurements width 3050 mm Measurements depth 1450 mm Measurements height 1380 mm Machine weight 1170 kg Additional Equipment Loading and unloading rollers: Facilitates positioning and movement of the material Three new blades for cutting metal, ready to be assembled and used Original use and maintenance manual and CE certificate This FMB Jupiter Metal Band Saw was manufactured in 2010. Consider the opportunity to buy this FMB Jupiter Metal Band Saw. Contact us for more information. Application Types Sawing

Condition: used, Year of construction: 1999, functionality: limited functionality, STENNER ST9 Band Resaw 1999 11 kW motor Belt wheel width 900 mm Cutting band width 75 mm Saw tension indicator Manual cutting height adjustment Manual cutting width adjustment Machine dimensions: width 170 cm, length 110 cm, height 230 cm, weight approx. 1600 kg Crsdpfx Aexiydljbush

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 3,600 mm, travel distance Z-axis: 150 mm, worktable width: 1,800 mm, worktable length: 3,200 mm, Bridge saw with tilting table Sawing up to 15 cm height possible with automatic lowering and manual mode Automatic cutting sequence with shut-off Cedpfx Aoxiw Twsbusrh German-language display operation and fault analysis Manual rotary table with digital angle display Tilting table with plug-in forks Mechanical tilting of the saw head possible 500 mm saw blade diameter

Condition: used, Scheer FM 2-3000 Veneer Saw, Splicing and Fine Cutting Saw Type: FM 2-3000 Motor: 2.5 HP Csdpfxsxf Tqwe Abujrh Machine No.: 199540 Cutting length: 3000 mm Saw blade diameter: 180 mm Rear support table Weight approx. 300 kg.

Condition: excellent (used), KASTOmicut U 2.6 – Semi-Automatic Pivot Frame Bandsaw incl. Long Roller Conveyor For sale is a heavy-duty, semi-automatic pivot frame bandsaw KASTOmicut U 2.6. The machine features infinitely variable cutting speed and is ideally suited for all cross-cutting and mitre tasks (-45°/+60°) on pipes, profiles, and solid materials in workshop environments. The fully hydraulic saw feed and hydraulic material clamping enable semi-automatic, sensitive, and tool-preserving sawing operations. — Features • Hydraulic saw feed • Rotary table as material support • Hydraulic material clamping • Infinitely variable cutting speed • Mitre cuts to both sides from +60° to -45° — Technical data • Dimensions (L × W × H): 760 × 1620 × 2040 mm • Material support height: 950 mm • Total weight: 510 kg • Total power: 2 kW • Cutting speed: 20 – 110 m/min • Saw band dimensions: 3,180 × 27 × 0.9 mm • Saw band guides: Side and back roller guides, replaceable • Material clamping: Mechanical • Saw feed: Hydraulic, continuously adjustable • Saw band tension: Mechanical • Saw band cleaning: Fitted with a replaceable wire brush — Cutting capacities • 90° round (solid/pipe): 160 / 260 mm • 90° flat (W × H) (pipe): 310 × 260 mm • 90° square (solid/pipe): 160 × 160 / 260 × 260 mm • +45° round (pipe): 220 mm • +45° flat (W × H) (pipe): 200 × 200 mm • +60° round (pipe): 140 mm • +60° flat (W × H) (pipe): 140 × 140 mm • -45° round (pipe): 240 mm • -45° flat (W × H) (pipe): 200 × 260 mm • -45° square (pipe): 210 × 210 mm • Minimum remnant length: 30 mm — Condition & Delivery The machine is in perfect working condition and ready for immediate use. • Shipping on a pallet by freight forwarder possible Europe-wide • Additional machines available – check our listings for more offers — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT. Subject to change and errors excepted. Crsdpfsxizabjx Abueh

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Credpfx Ajw Sy T Hobush Storage location: Nattheim

Condition: good (used), roll diameter 420 mm Crodpjxf Nahofx Abujh throat 405 mm workpiece height 380 mm cutting speed 16 - 2200 m/min table surface area 615 x 615 mm saw band length 3450/3650x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 470 kg dimensions of the machine ca. 1250 x 1000 x 2100 mm From a training workshop Good condition (!!) Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Manufacturer: HolzHer Model: 1205 Csdpfx Asxiwvlsbujrh Cutting range: 445 cm width, 175 cm height Voltage: 380 volts.

Condition: used, Altendorf F45 sliding table saw for precise rip, cross, and miter cuts in solid wood, panel materials, and plastics. The machine impresses with its electric adjustment, robust construction, high cutting accuracy, and flexible application possibilities in furniture and interior design. Saw blade diameter: Max. 450 mm Sled length: 3.000 mm cutting height: Max. 150 mm cutting width: 1.000 mm swivel range: 0° – 45° engine power: 7,5 kW Central lubrication: Automatically Crsdpfx Abjxf Iyyouoh Included: Duplex stop

Condition: good (used), Year of construction: 1976, functionality: fully functional, saw band length: 4,050 mm, type of input current: three-phase, cutting capacity: 600 mm, Producer: HEMA, Paul and Gotthilf Heermann Type: UH 600 Year of construction: 1976 Saw blade length: 4500 mm Cutting height: 385 mm Cutting width: 230 mm /max: 580 mm/ Saw blade width: 5-25 mm Credevygmxjpfx Abuoh 45° tiltable table for miter cuts Table: 540 x 600 mm Engine: Manufacturer: Dietz Type: FDR 100 LA/4N Power: 2.2 kW 50 Hz; 5.2A; 380V Speed: 1420 rpm

Condition: new, Year of construction: 2019, functionality: fully functional, I am offering a new, originally packaged saw for sale. Csdpfxewxr Dxo Abusrh

Condition: used, Year of construction: 1996, Max. cutting length: 3100 mm Max. cutting height: 45 mm Max. cutting depth: 515 mm Saw blade diameter: 180 mm Clamping beam movement: pneumatic Stop system: manually adjustable stop rake Stop indicator: scale Extraction channel: Yes Extraction system: external extraction Feed type: manual Jointing unit: with diamond-tipped saw blade (resaw) Machine type: stationary Weight approx.: 850 kg Dimensions: 4400 x 1180 x 160 mm Motor power: 2.2 kW Extraction diameter: 80 mm Credpew Sy Scjfx Abuoh Storage location: Nattheim

Condition: used, Parts for PMC 12 - or - for LKH 310 - Clamping elements Cjdpfoxf H Ucox Abuorh - Saw blade guiding elements

Condition: good (used), Kölle Band Saw BSM40 Crjdpfeum Sy Hsx Abuoh - with belt grinding and welding unit - €1,200 negotiable, net Good condition, fully functional. Can be inspected and tested on site. Shipping available internationally. Inspection: As a general note, to avoid misunderstandings, the item may be inspected and tested under power before purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange an inspection appointment, I am always available at the phone number listed below or above. Subject to errors in the description and prior sale. VAT will be shown separately on my invoices. Shipping via freight forwarder.

Condition: new, Year of construction: 2025, Model CORMAK BS370SA – Modern Automatic Band Saw for Metal The CORMAK BS370SA model is a modern automatic band saw designed for efficient series cutting of pipes, profiles, and solid materials with various geometries. Its robust construction, full automation, and high cutting accuracy make this machine ideal for use in production plants, tool workshops, and metalworking companies where repeatability and reliability are essential. Key Features of the Machine Automatic cutting cycle: clamping, material feeding, cutting, and arm return are all performed without operator intervention. Angle cutting capability across the full working range – up to 45° to the left and 60° to the right. Inverter-controlled band speed adjustable smoothly between 5–90 m/min. Hydraulic control of the arm and vise, ensuring precision and user comfort. Material feed system equipped with a 2450 mm roller conveyor, 370 mm feed per cycle, and ±0.2 mm accuracy. Controller with operator panel: allows programming of cutting parameters, monitoring part quantity, and error signaling. Construction and Technology The CORMAK BS370SA band saw is built on a rigid welded frame, ensuring operational stability and vibration reduction. The hydraulic feed and clamping system, precision blade guides, and stepless speed control guarantee high quality and safe operation. The machine is equipped with a roller conveyor to facilitate automatic material feeding. Precision and Performance Thanks to high-quality components and modern technical solutions, the CORMAK BS370SA band saw delivers repeatable and precise cuts. Adjustable cutting speed and hydraulic blade pressure ensure long tool life and full control over the machining process. Applications This machine is recommended for facilities involved in serial production, processing of steel, aluminum, and non-ferrous metal components. It is especially suitable as a band saw for pipes, profiles, and solid parts in the steel structure, prefabrication, and precision manufacturing industries. Standard Equipment Control console on a separate pedestal Hydraulic control of the vise and arm Roller conveyor for automatic material feeding Arm position memory Blade cleaning brush Cooling system with pump Bimetal band saw blade Codpfexiv Hcex Abusrh CE declaration of conformity and operation manual Technical Specifications Main motor power 1.5 kW (400 V) Hydraulic motor power 0.75 kW (400 V) Blade dimensions 3160 x 27 x 0.9 mm Cutting speed (stepless) 5–90 m/min Saw frame rotation angle Up to 60° Workpiece Cutting Capacity Angle Round ● Square ■ Rectangular ▅ 90° 270 mm 260 mm 370 x 220 mm 45° 240 mm 180 x 180 mm 240 x 160 mm 60° 160 mm 100 x 100 mm — Machine Dimensions Length: 3970 mm Width: 1850 mm Height: 1763 mm Net weight: 770 kg Gross weight: 925 kg The machine is also equipped with an additional roller conveyor: Length: 2450 mm

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, saw band length: 3,660 mm, cutting capacity: 300 mm, overall weight: 1,300 kg, cutting height (max.): 300 mm, table length: 400 mm, in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Crjdpfx Abewvvr Isujh Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m

Condition: used, Year of construction: 1983, functionality: fully functional, Bäuerle table bandsaw type BS 630 Series D, year of manufacture approx. 1983, robust construction, wheel diameter 630 mm, wheel distance 1280 mm, saw blade length 4500 mm, saw blade length (min–max) 4395–4530 mm, saw blade width (min–max) 10–25 mm, wheel guides, 4 HP, 380 Volt, total height 2135 mm, weight 564 kg. Machine is subject to differential taxation. Codexf Hp Hepfx Abusrh

Condition: used, Year of construction: 1984, Roller diameter: 600 mm Speed: 750 rpm Maximum cutting height: 470 mm Maximum cutting width: 580 mm Maximum blade length: 4600 mm Maximum blade size: 30 x 5/10 mm Table size: 550 x 835 mm Table height: 850 mm Motor: 3 HP (2.2 kW) Weight: 320 kg Storage location: Supplier Cedpfew Sy Hgsx Abujrh