Used Wet Stone Saw for sale (8,461)

Condition: excellent (used), Double mitre saw ALFAMACCHINE T350 CE Codpfoxg Hx Dex Abuorh Double saw for cutting at 45-degree angles Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3000 rpm Motors: 2×1.5 kW Air requirement: 5-7 bar Cutting width: 15-80 mm Cutting height: 10-80 mm

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm, max. cutting height: 2200 mm, saw blade diameter: 250 mm, max. machining thickness: 60 mm, saw blade bore: 30 mm, lower support: plastic rests, material support: retractable plastic rails, measuring system: scale, saw head tilting: manual, saw feed: manual, mounting: freestanding, extraction: external, saw beam locking: manual, weight approx.: 1000 kg, dimensions: 5600 x 1700 x 3000 mm, motor power: 4.2 kW Storage location: supplier Cjdpfx Aoxg Igiebuorh

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Csdpfx Asudi Unjbujrh Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 306533, Machine Specifications Technical Specifications Machine length: approx. 1850 mm Machine width: approx. 1200 mm Machine height: approx. 2300 mm Machine weight: approx. 550 kg Idler pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Saw blade length: 4700 mm Loading height: 1065 mm Cutting height: 350 mm Cutting width without width stop: approx. 610 mm Cutting width with stop: 150 mm Motor power: 0.75 kW Cutting speed: 10 - 100 m/min Table travel: approx. 600 mm Table feed speed: 0.03 - 0.3 m/min Extraction connection diameter: 1x Ø 120 mm + 1x Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1725 m³/h Electrical connection Operating voltage: 400 volts / 50 Hz Current type: 3 x 400 volts Crjdpfx Ajwm Du Esbush Fuse protection: max. 16 amps Minimum cross-section: 1.5 mm²

Condition: used, SCM M3 double edger, in good condition, 300 mm cutting width, 100 mm cutting height Codpfx Asxlnpnjbujrh

Year of construction: 2015, operating hours: 3,337 h, condition: ready for operation (used), General Data Measurements width 2330 mm Crodpexgwd Djfx Abueh Measurements depth 2360 mm Measurements height 1850 mm Machine weight 2500 kg Main Drive Spindle motor power 6 kW Number of axis 2 Additional Equipment Saw Band: 5090 x 34 x 1.1 mm This KASTO Win A 3.3 was manufactured in 2015. A robust metal band saw, it features a 6 kW drive, operates on 400V/50 Hz, and handles a cutting speed of 12-150 m/min. The saw band measures 5090 x 34 x 1.1 mm, and it includes a 120-liter coolant system with a chip conveyor. Ideal for cutting dimensions up to 330 mm in height and 350 mm in width. Contact us for more information about this machine. Application Types Sawing

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cedpfx Aoxg Hanjbujrh Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Condition: excellent (used), functionality: fully functional, Single-head crosscut saw Crjdpfx Abexgviroujh blade diameter 500 mm tilt 90°-45°/67° roller conveyor with controlled positioning stop Roller conveyor length 7200 mm

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Crodpfevuf S Nex Abush Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: used, Year of construction: 1988, saw band length 3.000 mm max. workpiece height 215 mm table-size 605 x 605 mm cutting speed 12 - 750 m/min transmission ratio 4 Cedpexgu Iyjfx Abuerh throat 410 mm turning speed range 39 - 2.460 U/min total power requirement 2 kVA weight of the machine ca. 0,6 t dimensions of the machine ca. 2,0 x 2,0 x 2,5 m Bandsaw MÖSSNER - Rekord SM 420 - Operating Hours: 2.651 h - Table swivable - incl. replacement saw blades: 1x 30,000 x 13 x 0.65mm 4x 30,000 x 6 x 0.65mm 1x 15m (6H) 13 x 0.9mm 1x 15m (10H) 13x 0.9mm

Year of construction: 2010, condition: ready for operation (used), A monoblock bridge saw Denver for processing hard slab materials (marble, granite, natural stone, etc.) is available. Travel X/Y/Z: 3500mm/1900mm/370mm, travel speed: 16m/min, spindle power: 11kW, saw blade speed: 1400rpm, saw blade diameter range: 350mm-500mm, max. cutting thickness: 155mm, table dimensions X/Y: 3150mm/1750mm. Machine dimensions X/Y/Z: approx. 5900mm/3000mm/2700mm, weight: approx. 3400kg, control: Osai. Documentation available. An on-site inspection is possible. Credpjxlit Ujfx Abush

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Crjdpfx Abjw Eu Akoujh

Condition: good (used), Year of construction: 1989, Brand: Lyonflex Year: 1989 In perfect working condition Crsdpsxlildefx Abujh 380V Table length: 1.60 m Table depth: 1.75 m

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Codpfx Aexligusbusrh Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, Wet waste press press container Bergmann MPB405 SN/10 for skip loader Credpovmwpwsfx Abuoh 10cbm usable volume tested, serviced, fully functional Painting in desired RAL color possible We would be happy to make you an offer including delivery.

Condition: new, Year of construction: 2025, Roller diameter: 640 mm Stand projection: 620 mm cutting depth: 400mm table tiltable: yes -0 to + 15° Table size: 870 x 620 mm belt speed: 1660m/min Motor power: 2,2 kW / 400V Crjdpegtdpmofx Abujh Motor brake: yes / automatic Suction connection: 2 x 120mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Condition: as good as new (ex-display), Year of construction: 2023, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,360 mm, cutting height (max.): 90 mm, saw blade diameter: 300 mm, Equipment: saw blade guard, Sliding table saw / Panel saw Brand: Wood-Mizer Model: MS750 Year of manufacture: 2023 Credpfexlg Dkox Abuoh Technical data Sliding table length: 3200 mm Blade diameter: 300 mm Maximum cutting height (300 mm blade): 90 mm Maximum blade diameter: 400 mm Scoring unit Maximum splitting width against fence: 1360 mm Automatic YD start Main motor: 6 kW Scoring unit motor: 0.75 kW

Condition: excellent (used), passing width 1.000mm, stroke 800 mm, saw motor 22 kW or 30 kW, high adjustment by gear motor with brake, automatic lubrication pump, clamping carriage 6 m with 7 m rack, 6 mechanical clamping stations Cjdpetzlrfefx Abujrh

Condition: used, Year of construction: 1998, cutting diameter 380 mm saw band length 4570 x 42 mm table height -- mm cutting width 380 mm band speed 15 - 120 m/min load centre 380 mm winding height 380 mm rotary disc high 380 x 400 mm height of the workpiece 2600 x 2600 x 2400 mm weight of the machine ca. 5,6 t dimensions of the machine ca. 2300 m 2-column guided band saw Furnishing: - fully automatic metal band saw - chip conveyor - hydraulic bundle clamping Csdpfx Aot I D T Iebujrh - Cooling device - automatic feed - Bandsaw blades

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Crjdpjr I E Hcefx Abueh dimensions 4000 x 500 x 920 mm weight 450 kg

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch Crsdpehhzl Hefx Abueh * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm 350 x 200 mm 240 mm 220 mm Credpfxoivuqts Abujh 230 x 220 mm 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: used, Year of construction: 2003, cutting diameter 250 mm saw band length 3820 mm Cedpfsr A Ivpsx Abuerh cutting width 300 mm dimensions of saw-band 3820 x 27 x 0,9 mm feed length 2000 mm/Hub band speed 18 - 106 m/min capacity 90 degrees: round 250 mm capacity 90 degrees: flat 300 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: round R 220 mm capacity 45 degrees: flat R 220 x 300 mm capacity 45 degrees: square R 220 x 220 mm capacity 45 degrees: round L 220 mm capacity 45 degrees: flat L 240 x 300 mm capacity 45 degrees: square L 240 x 240 mm capacity 60 degrees: round R 120 mm capacity 60 degrees: flat R 120 x 300 mm capacity 60 degrees: square R 120 x 120 mm capacity 60 degrees: round L 140 mm capacity 60 degrees: flat L 240 x 300 mm capacity 60 degrees: square L 140 x 140 mm coolant capacity 60 l total power requirement 4 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 4,2 x 2,2 x 2,3 m

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar Cedpetv Rgrsfx Abuerh weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: new, cutting diameter 255 mm saw band length 2765 x 27 x 0,9 mm table height 950 mm 18-110 m/min 255 mm capacity 90 degrees: square 240 mm capacity 90 degrees: flat 300 x 180 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm Credpfx Aot I D Tujbush capacity 60 degrees: round 135 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm capacity 45 degrees: round rechts 180 mm capacity 45 degrees: square rechts 160 mm capacity 45 degrees: flat rechts 180 x 100 mm 1,5/1,8 kW 350 kg 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system