Used Sab Saw for sale (5,928)

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. Cjdezwh Rcjpfx Agrjhd It runs on 30mm blades. All new power feed sprockets and fully DC braked.

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Chedpfx Agsyh Hc Rsrjd

Condition: used, Year of construction: 2016, IceTech SAW – Industrial Dry Ice Block Saw with Conveyor – 2016 IceTech industrial sawing machine for cutting pre-formed dry ice blocks and slabs into smaller pieces. The machine features a stainless steel enclosure, an integrated conveyor, and a Beckhoff operator panel. It is equipped with an enclosed cutting section, an emergency stop button, and adjustable levelling feet. This is an option for dry ice producers and businesses looking for equipment for a dry ice processing or packaging line. Suitability for the required block format and production layout should be checked. Technical specifications: • Manufacturer: IceTech, Denmark • Machine designation: SAW • Machine number: 512792 • Serial number: 2016-09-04 • Year of manufacture: 2016 • Machine weight: 330 kg • Electrical supply: 3 × 400 V AC • Frequency: 50/60 Hz • Nameplate current: 16 A • Maximum system pressure: 10 bar • Operator panel: Beckhoff • Integrated conveyor Chedo Ahg Ebspfx Agrsd • Stainless steel enclosure ASCO dry ice saw, ASCO AAS, ASCO AAS01, ASCO Active Dry Ice Saw, ASCO Passive Saw, ASCO dry ice block cutter, ASCO dry ice cutting equipment, Tannewitz dry ice saw, Tannewitz dry ice bandsaw, Tannewitz 24 inch dry ice saw, Tannewitz 36 inch dry ice saw, Cold Jet dry ice equipment, ColdJet dry ice processing equipment, Cold Jet IceTech saw, IceTech dry ice block saw, PEHAKA dry ice saw, PEHAKA special purpose bandsaw, Dadaux ice saw, Dadaux bandsaw, Dadaux SX 350 KC, KC Tecnologia ice saw, KC Tecnologia SX 220, KC Tecnologia SX 350 KC, KC Tecnologia SX 400, KC Tecnologia C70, Big Block Cutter C70, BF TECH ice saw, BF Technology ice bandsaw, BF TECH C70, BF TECH ice block cutter, industrial dry ice block saw, dry ice slab cutting machine, dry ice slice cutter, solid CO2 cutting equipment, conveyor saw for dry ice blocks, used dry ice saw for sale, second-hand dry ice cutting machine, stainless steel ice bandsaw, industrial ice block cutting equipment. IceTech SAW, IceTech dry ice saw, IceTech 512792, dry ice block saw, dry ice cutting machine, dry ice block cutter, dry ice slab saw, dry ice slab cutter, dry ice slice cutter, dry ice portioning machine, solid CO2 saw, solid carbon dioxide cutting machine, industrial dry ice saw, conveyor dry ice saw, enclosed dry ice saw, dry ice processing equipment, dry ice production line equipment, dry ice packaging line equipment, dry ice block processing, dry ice slab processing, used dry ice equipment, second-hand dry ice saw, stainless steel dry ice saw, Beckhoff operator panel, dry ice machinery for sale.

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments Cjdpfx Agofv Hphjrohd - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice Chsdpjwxmhlefx Agred

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 382, Log sawing line with infeed and outfeed conveyors, 2 x 2 electrically movable sawblades, sawblade diam 970 mm, main el.motors 2 x 45kW. Log length 0,8 - 8 m, max log diam 40 cm, original electric cabinet, line is still under power and can be demo started up, line has been in operation totally 3-4 years Chjdexwyzgspfx Agrod

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, Csdpfx Agotqt T Iorohd - complete with hydrostation, - electrical cabinet.

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AY11051, functionality: fully functional, cutting height (max.): 330 mm, overall weight: 1,500 kg, saw band length: 5,385 mm, saw band width: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS SAWING AREA Sawing direction: Vertical. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sawing direction: Vertical Cut to feed roller: max. 230 mm Cut to stop: max. 260 mm Cut width to column: max. 300 mm Total opening: max. 480 mm Cutting height: max. 330 mm Saw band width: max. 100 mm Saw band length: min. 5,385 mm Saw band length: max. 5,485 mm Saw band thickness: min. 0.8 mm Saw band thickness: max. 1 mm Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS & WEIGHT Dimensions (L x W x H): 2,000 x 950 x 2,400 mm Weight: 1,500 kg EQUIPMENT CE marking Max. cut to feed roller: 230 mm Max. cut to stop: 260 mm Max. cut width to column: 300 mm Max. total opening: 480 mm Max. cutting height: 330 mm SAW BAND Max. saw band width: 100 mm Min. saw band length: 5,385 mm Max. saw band length: 5,485 mm Min. saw band thickness: 0.8 mm Max. saw band thickness: 1 mm TABLE AND WHEELS Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm FEEDING AND DUST EXTRACTION Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Chsdps Af Hk Usfx Agrjd GENERAL Year of manufacture: 2002 Color: Blue Serial number: AY11051 CE marking: Yes ELECTRICS AND DRIVE Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS AND WEIGHT Overall length: 2,000 mm Overall width: 950 mm Overall height: 2,400 mm Weight: 1,500 kg

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 2022/5/18, functionality: fully functional, rotational speed (max.): 2,800 rpm, overall weight: 480 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cedpfx As Ah Rh Rjgrehd Saw Blade I Saw blade diameter: 550 mm Bore diameter: 50 mm Motor power: 3 kW Operating voltage: 400 V Speed: 2,800 rpm Swivel range: -70° / 90° / 45° Saw Blade II Saw blade diameter: 350 mm Bore diameter: 40 mm Motor power: 2 kW Operating voltage: 400 V Speed: 2,800 rpm Stock dimensions: max. 210 × 100 mm Vertical cutting height: 150 mm MACHINE DETAILS Air connection: 8 bar Feed: pneumatic Dimensions & Weight Dimensions (W x D x H): 1,200 x 1,000 x 1,400 mm Weight: 480 kg EQUIPMENT Pneumatic feed with two-hand control Operating manual available

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 4 kW (5.44 HP), cutting height (max.): 105 mm, cutting width (max.): 900 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, saw blade bore: 30 mm, total length: 2,000 mm, overall weight: 450 kg, Panel saw FELDER, model K700, year of manufacture 2005, with scoring saw and tilting saw blade. Sliding table 2000 mm, condition: almost new. Csdpj Ah Iazsfx Agrehd

Condition: good (used), Year of construction: 1989, power: 22 kW (29.91 HP), with electric saw blade adjustment chain width 230 mm motor 22 kW max. cutting height without pressure comb in fixed position: 130 mm max. cutting height without pressure comb with movable blade: 95 mm with pressure comb: 15 mm less cutting height still in good condition Chsdpfxjzv Uyus Agrsd

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Like-new, very well-maintained veneer saw with planing unit. Chedpfxj Ahy H He Agrsd Maximum cutting length: 3050 mm. Equipped with rear support and finger stop.

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, overall weight: 4,200 kg, The machine functioned perfectly until it was taken out of service. Chjdpfx Agjz E A U Ajrjd Currently, it has the following fault: motor protection switch 018. Loading onto a truck is possible!

Year of construction: 2003, condition: good (used), functionality: fully functional, Selling GMM Eura bridge saw in good working condition. Mitre cuts. Table 35000x1850 lifts and rotate. Available in january 2027. Csdpfx Age Ahq Udjrjhd Max blade D625. Flange 210mm. Max cut depth 200mm. Axis O sladge 3500 Axis X translation 3500 Axis Y up and down 320 Power 20kw

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, overall weight: 11,000 kg, Equipment: documentation/manual, saw blade guard, scorer, BIESSE Selco WNTR 600 with turning table . Made in 2003 • Max. blade projection: 132 mm • Cutting lengths: 4,500 mm • Main saw motor: 18 kW Codpfx Ags Ahnc Torohd • Main saw blade diameter: 430 mm • Scoring saw blade diameter: 200 mm • Saw carriage speed: up to 150 m/min (brushless drives) • Pusher speed: up to 90 m/min • Pusher grippers: independent pneumatic grippers • Control system: OSI Plus numerical control • Machine layout: angular panel sizing possible by turning table, make it possible to cut two lines for automatic rip and cross-cutting . First time installed in 2004 and stil located on its original place , all machine function are 100% operative. Price 12 500 euro ex. VAT is included disassembling, packing and loading by crane. No VAT for sale outside Norway. Rekman Maskin&Service work with service of Biesse machine since 1986 here in Norway.

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8384, total length: 144,400 mm, total width: 4,400 mm, total height: 4,000 mm, used Holtec miter saw, in operation until recently. Cedozp Rn Uspfx Agrshd

Condition: good (used), Year of construction: 1980, Bandsaw blade dimensions: recommended size 3400 / 3200 mm Cutting width: 400 mm Bandsaw blade length min./max.: 3200 / 3400 mm Bandsaw blade width: 20 x 3 mm Cutting speed: 10 - 2150 / 8 steps (manual) m/min Chsdj Ahq Alopfx Agred Table size: 670 x 670 mm Table height above floor: 1020 mm Table tilting +/-: left 10° and right 30° Table movement horizontal: 270 mm Total power requirement: approx. 1.5 kW Machine weight approx.: 650 kg Machine dimensions (LxWxH): 1.2 x 1.05 x 2.0 m

Condition: used, Year of construction: 2022, machine/vehicle number: 0-341-73-4473, table height: 920 mm, HOMAG SAWTEQ B-200 / HPP 200/43/43 – Year of manufacture 2022 Horizontal panel dividing saw for wood-based panels with air cushion tables, program carriage, and operator station. Machine number: 0-341-73-4473 Cutting length: 4,300 mm Saw blade projection: 80 mm Main saw motor: 18.0 kW Scoring saw motor: 1.5 kW Saw carriage speed: up to 80 m/min Program carriage: 25 m/min forward, 80 m/min backward Clamping jaws: 6 pieces, as per order confirmation Working height: 920 mm Meter readings according to screenshot from October 22, 2026: Main usage: 2,092.87 h Operating time: 7,033.96 h Cedpfj Agxfnex Agrohd The meter reading screenshot is part of the image gallery. Location: Basel area, Switzerland. Inspection possible until early December 2026 by prior appointment. Dismantling and removal in the period from December 8–18, 2026, after scheduling. Price on request. Scope of supply, software/license scope, and current operating condition to be agreed upon. Subject to change and errors.

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! TECHNICAL DETAILS Cutting height: 510 mm Cutting width: 510 mm Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Input frequency: 50 Hz Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Heavy-duty double-column construction CE marking Chedpfx Ago Aggbxered Documentation / Manual Lighting Motor brake Further technical data and information can be found in the attached documents.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Important! The machine MUST be picked up during the first week of December (week 49). Free loading with a truck. Bandsaw automation system Behringer HBP 303A / PCM Year of manufacture: 1998 Including magazine for up to 9 tons Magazine dimensions: (L x W x H) 480 x 400 cm Capacity for 9 bars, approximately 8 m in length. The bandsaw automation system is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range: 260 mm Saw motor drive power: 4 kW Total drive power: 15 kW Cutting speed: 10 - 120 m/min Machine dimensions (L x W x H): 320 x 260 x 220 cm Csdpfxsz E Np Ho Agrshd Weight: approx. 2500 kg

Condition: reconditioned (used), Year of construction: 1993, For sale is a Kaltenbach cold-cutting saw. Gearbox is free of play! Codpfx Agj Ahzb Ejrshd Type: KKS 400 EC E Year of manufacture: 1993 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse: 1,550 mm/min Maximum working range: 130 mm Working range for square material: 120 mm Working range for flat material: 305 x 20 mm Working range for round material: 130 mm Minimum working range: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions L x W x H: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Shipping possible upon request. Forklift available for loading.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Bargain due to business closure Codpfx Ago Ah D Hfjrohd Striebig Standard 3 TRK

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Altendorf F 45 EcoDrive with CE configuration - Year of manufacture: 9/2016 - Electrically adjustable height and swivel function 0 – 46° for the main saw blade with automatic correction of the cutting height when the saw unit is swiveled. - 3-axis scoring unit for one-sided swiveling - LED lighting in the hazard area of the scoring unit - 5.5 kW (7.5 hp) with VARIO - Double sliding table, table length 3,200 mm - On/off switch on the double sliding table - Table extension 840 mm - Angle/miter stop with DIGIT L, cutting lengths up to 3,200 mm - CNC parallel stop, cutting width 1,300 mm - Toolbox (minimum length of double sliding table: 3,000 mm) - Front support roller, width 300 mm - Operating manual, operating tools, charger with batteries Machine is in very good condition, cleaned, and inspected. Chjds Ahgzxjpfx Agrsd

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: ST001, functionality: fully functional, power: 18.4 kW (25.02 HP), overall weight: 9,500 kg, saw band length: 11,760 mm, saw band width: 67 mm, No minimum price – guaranteed sale to the highest bidder! Chodpfj Af Hd Iox Agrsd TECHNICAL DETAILS Circular sawing capacity: 1,050 mm Saw band length: 11,760 mm Saw band width: 67 mm Saw band thickness: 1.6 mm Workpiece clamping: Hydraulic MACHINE DETAILS Control system: Conventional Power: 18.4 kW Dimensions & Weight Dimensions (L x W x H): 12,000 x 2,450 x 2,000 mm Unladen weight: 9,500 kg Number of transport packages: 2 EQUIPMENT CE marking 6-meter roller conveyor

Condition: reconditioned (used), Year of construction: 1991, A Kaltenbach cold-cut saw is for sale. The machine has been completely disassembled and reassembled. During the overhaul, the gearbox, motor, and hydraulics were refurbished. The table was resurfaced and fitted with new bearings. The gearbox is free of play! Type: KKS 400 E Year of manufacture: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse in/out: 1,550 mm/min Maximum workpiece size: 130 mm Workpiece size for square material: 120 mm Workpiece size for flat material: 305 x 20 mm Workpiece size for round material: 130 mm Minimum workpiece size: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Codps Ahz Dxsfx Agrshd Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Shipping possible upon request. Forklift available for loading.