Used Metal Saw Machine for sale (67,684)

Condition: good (used), Year of construction: 1994, Offer 24186 Technical data: - Manual saw blade feed - Workpiece clamping in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting range: at 90° - Round: 110 mm - Rectangular: 82 x 160 mm - Square: 82 x 82 mm - Miter cut: at 45° - Round: 110 mm Hjdezqtrfepfx Amyor - Rectangular: 80 x 120 mm - Square: 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirement: approx. W 600 x H 1600 x D 750 mm - Weight: approx. 300 kg

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5562, Offer 24212 Technical data: - Saw blade diameter: up to 350 mm - Saw blade feed via hand lever - Maximum opening width of the vise: 205 mm - Cutting range: - with saw blade diameter of 350 mm - at 90°: - round: 120 mm - square: 110 mm - rectangular: up to 200 x 90 mm or 140 x 110 mm - at 45°: - round: 100 mm - rectangular: 100 x 100 mm - Miter adjustable: - Left: up to 45° - Right: up to 30° - Saw blade speeds: 34 + 68 1/min Hjdpjzqtntjfx Amysr - Drive: 400 V / 2 / 2.6 kW - Coolant system - Feed – roller table: 2000 mm - Space requirement: approx. W 850 x H 1750 x D 950 mm - Weight: approx. 400 kg

Condition: good (used), Year of construction: 1994, machine/vehicle number: 4110 HM 0001, Offer 24310 Technical data: Hodpfx Amezp H T Toysr - Manual blade feed - Workpiece clamping in the machine vise - Saw blade diameter 315 mm - 2 cutting speeds 40 - 80 m/min - Cutting range at 90°: round 110 mm - Rectangular 82 x 160 mm - Square 82 x 82 mm - Mitre cut at 45°: round 110 mm - Rectangular 80 x 120 mm - Square 82 x 82 mm - Drive 400 V / 1.4 / 1.9 kW - Coolant system - Space requirement approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 109884, Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm Hedpfozibmbsx Amyjr - Square 120 mm - Rectangular 300 x 40 mm - or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 400 V / 1.2 / 1.8 kW - Feed rate of the saw blade, hydraulically continuously adjustable - Vertical material clamping - Coolant system - Space requirement: approx. W 800 x H 1850 x D 1100 mm - Weight: approx. 850 kg - Infeed – roller conveyor with storage area: 4000 mm - Outfeed – roller conveyor with measuring stop: 4000 mm

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3585, Offer 25255 Technical data: Hjdpfx Amoy R Abloyor - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - Maximum vise opening width: 145 mm - Cutting capacity with saw blade diameter 300 mm: - At 90°: round 95 mm flat 125 x 90 mm - At 45°: round 95 mm flat 95 x 85 mm - Mitre adjustment: left up to 30° / right up to 45° - Saw blade speeds: 20 and 40 rpm - Drive: 400 V / 1.6 / 2.1 kW - Coolant system - Discharge roller table: 1500 mm - Required space approx. W 600 x H 2000 x D 800 mm - Weight approx. 250 kg

Year of construction: 1987, condition: not inspected (used), Sharpening machine for metal and segmented circular saws. Circular saw blade diameter from 80 - 710 mm. Tooth pitch adjustable. Tooth height 1.2 - 14 mm. Working speed steplessly adjustable, 15 - 180 teeth/min. Hjdolmkpfopfx Amyer Wet grinding system, NC controlled.

Condition: used, Vertical bandsaw PEHAKA, type SM 4 Manufacturer's No. 27060, year of manufacture approx. 1980 Overhang: 380 mm Table size: 620 x 480 mm Cutting height: 250 mm Roller diameter: 400 mm Working height: 1120 mm Saw blade length: min. 2900 - max. 3100 mm Saw blade speed: 22-125 m/min, infinitely variable Motor power: 0.6 / 0.75 kW Power connection: 380 Volts, 50 Hz - Infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds - Saw table tiltable +/- 15° - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - Base frame made of U-steel 100 x 50 mm, movable with a pallet truck Space requirement L x W x H: 1050 x 800 x 1950 mm Hedpjiv A U Ejfx Amyer Weight: 355 kg Good condition

Condition: good (used), Year of construction: 2004, Offer 24455 Technical data: - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm - Cutting range Li at 60° approx. 80 mm - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm Hsdpeuv Eygofx Amysr - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: - Round: 130 mm - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm - Cutting capacity at 45°: - Round: 130 mm - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW - Saw blade feed rate hydraulically infinitely adjustable - Coolant system Hjdpfx Aex Sxx Aomyor - Required space approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Technical Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90°: round 130 mm Hedpswk Icbjfx Amyjr - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm - Miter adjustable left and right 0 - 90° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm Hodpfjxta N Ajx Amyer - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Hodpfexdmgvjx Amyer Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Hjdpfovmwn Hsx Amyor Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Hedpfx Aowz Ukyjmyjr Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 40,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: exchange table, fully protected exchange table, ultra-high power, dual platform Laser power: 12KW15KW, 20KW, 30KW, 40KW, 3KW.6KW Hsdpfjwxam Iox Amyjr Standard hardware: scrap car, fire brick, fully automatic butter filling, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, rear camera, internal camera, monitoring display, radiation-proof glass, top cover beam light curtain, partition dust removal Optional hardware: light-blocking rubber strip, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, top cover fan Optional functions: FDA configuration, CSA configuration, TUV configuration, conventional CE configuration

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Hodpfx Amew A Iileyjr Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Hedpfxsv Ng E Ts Amyer Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. Hsdsyq Rkyjpfx Amyer The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: new, Year of construction: 2026, Cutting length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 1565 mm (telescopic extension up to 2550 mm) Cutting depth: 170 mm Scoring cutter: no Sawblade height adjustment: handwheel Sawblade pivot adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: - Width stop indicator: scale Crosscut ruler indicator: scale Sawblade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 9.2 kW Hedpfxjqx Igqo Amyor Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 2900 mm Machine width: 1800mm Weight: 800kg

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Hedpezquywjfx Amyer Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm Hedpoy Tudwjfx Amyjr - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,100 mm, power: 19 kW (25.83 HP), DM1100 DC EVO Removal of solid slag Edge rounding up to 1100mm width. DM1100 DC EVO deburrs and rounds inside and outside contours of thick steel parts, mainly cut with plasma or oxyfuel. The DM1100 DC is equipped with a large deburring roller for removing heavy burrs and two counter-rotating cross belts. These ensure that the edges are rounded with even and soft edges. This machine impresses with a vertically movable sanding roller to compensate for tolerances and a wide magnetic range to ensure that even small parts can be processed safely. DM1100 DC Working capacity (mm) 1100x120 No. sanding rollers (D) 1 No. of cross belt stations (C) 1 Sanding drum specifications Ø435mm 20SH Sanding belt, dimensions (mm) 1150x1520 Sanding drum speed (rpm) 185-650 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.5-4.0 Sanding drum motor (kW) 11 Cross belt motor (kW) (2x) 3 Hjdpfxjtzkg Uo Amysr Feed motor (kW) 0.37 Total power (kW) 19 Rod suction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2258x2900x2220 Weight (kg) 4100

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Hodohmmfkepfx Amyer Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Hodpfx Asq Ii Dljmyer Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 2026, The CORMAK HBS320 Metal Band Saw is a high-performance, professional cutting solution designed for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal stock. Its robust construction, wide mitre cutting range, and compatibility with material feeding systems make it a versatile metal band saw for both production and fabrication applications. Key Features Mitre cutting from -45° to +60° – allows bevel cuts in both directions without repositioning the workpiece. Powerful 1.5 kW motor – delivers consistent performance and cutting stability, even when processing hard materials. Cast iron saw bow – minimizes vibration, ensuring high cutting accuracy and long service life. Precision blade guides – equipped with bearings and carbide inserts to improve blade stability and extend blade life. Enhanced operator safety – protective guards and safety micro-switches stop the machine when required. Integrated coolant system – electric coolant pump improves cutting efficiency and assists with chip removal. Construction and Technology The machine features a welded steel frame mounted on a rigid base with an integrated coolant reservoir. The cast iron saw bow provides exceptional rigidity for the cutting assembly. Cutting is performed by a gravity-fed system with hydraulic cylinder feed control, ensuring smooth and consistent blade descent. A quick-action vise with a movable jaw allows fast and secure workpiece clamping. The machine offers two blade speeds, 44 or 88 m/min, together with infinitely adjustable feed rate control. Precision and Performance Thanks to its rigid blade guidance system, the HBS320 maintains excellent cutting accuracy even during continuous operation. The independent coolant tank and pump reduce cutting temperatures, improve cutting quality, and extend blade life. An automatic motor shut-off at the end of the cutting cycle helps reduce unnecessary wear on drive components. Applications The CORMAK HBS320 metal band saw is suitable for cutting: Structural steel Stainless steel Tool steel Copper Aluminium Hsdozqrrwopfx Amysr Plastics It is an ideal solution for metal fabrication shops, tool rooms, steel structure manufacturers, maintenance workshops, and custom production facilities. Standard Equipment Quick-action machine vise Hydraulic feed cylinder with adjustable descent speed Coolant pump with coolant tray and chip collection system Two-speed blade drive Safety micro-switch protection system Optional Equipment Roller table extension Technical Specifications Specification Value Maximum round cutting capacity (90°) Ø 260 mm Maximum rectangular cutting capacity (90°) 320 × 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Feed control Hydraulic cylinder Blade size 2740 × 27 × 0.9 mm Blade speed 44 / 88 m/min Vise height 920 mm Overall dimensions 1400 × 880 × 1550 mm Weight 280 kg PLEASE NOTE! This machine is a returned item; it is second-hand but in working order. NO WARRANTY!