Used Welding Cell for sale (10,582)

Year of construction: 2004, condition: excellent (used), Technical specifications: System for welding longitudinal seams on steel beams with T- or H-profile, crane runway girders or bridge sections made of sheet metal - Max. boom arm height: 6,600 mm - Total length of the welding system: 6,700 mm - Horizontal reach of the boom arm: 5,000 mm - System runs on rails - Rail gauge: 2,065 mm - Submerged arc welding process (SAW) - SAW welding units - Power source: MESSER LG800N - Number of power sources: 2 units - Output: 400 amperes - Tack welding device Ijdpfx Adoxz Hu Ijnea The system is assembled and available for inspection under power in production. The seller assumes no liability for typographical or data transmission errors. The machine’s condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 32 h, functionality: fully functional, machine/vehicle number: 20225204645, arm reach: 1,300 mm, type of input current: three-phase, feed length X-axis: 2,000 mm, load capacity: 12 kg, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 12 kg, hose package length: 3,500 mm, protection type (IP code): IP54, working range: 1,300 mm, Lorch welding robot UR 10 e-Series with Cobot Move travel axis including Lorch S5 SpeedPulse XT RoboMIG FullProcess Iodsw Ilmqopfx Adnsa featuring a Lorch Cobot torch LMR 450 W 3.5 m, Lorch Con-nect weld data monitoring, Lorch Cobot Move travel axis, multifunction flange, including the following software package: Extended weaving, interval welding, Quick-Points – programming via multifunction flange, Smart Copy – direct copying or moving of parts, Extended assistant – user-specific parameters, Seam-Tracking – intelligent seam tracking, without welding table (available on request)

Year of construction: 1993, condition: ready for operation (used), A lattice-girder/girder welding system year 1993 is offered. Girder types: KT 8, girder height: 90mm-250mm. Upper chord: 5mm-12mm smooth/ribbed. Diagonal: 4mm-7mm smooth. Lower chord: 4mm-10mm smooth/ribbed. Maximum girder length: 14000mm, cutting grid: 100mm/200mm. Coil run-off tables: 5 units, maximum stacker stacking height: 500mm. Documentation available, inspection possible by arrangement. Isdpfoxz Ewhjx Adnoa

Condition: excellent (used), Year of construction: 2019, operating hours: 2,183 h, Weld fume extraction unit, very lightly used Manufacturer: IVAT AIR FTouer 10,000 Year of manufacture: 2019 Dimensions (L x W x H): 1619 x 1675 x 3643 mm Motor: 7.5 kW Weight: 1280 kg Voltage: 400 V, 50 Hz Model: RS10.000P Filter tower for dust/fume Premium filter tower Airflow: 10,000 – 12,500 m³/h Motor: 7.5 kW, 400 V, 50 Hz Ivat energy package 5.5 – 7.5 kW With Siemens frequency converter incl. WLAN and room air quality sensor for 50% energy cost reduction Features: - Energy package - Room air control - Temperature control - Heating/cooling module - Spark/fire protection - Workplace analysis display - TBD module (door monitoring) Iodjxpwcfspfx Adnoa Original price: 39,800 Euro

Condition: new, Year of construction: 2024, Handheld laser welder LWH-1000-N Gefasst SUP 20S The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Gefasst SUP 20S laser head - Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Iedpfohufigex Adnoa Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: good (used), Year of construction: 2010, machine/vehicle number: 25438, Offer 25438 Technical Data: - Length 3000 mm - Width 1500 mm - Plate height 200 mm - Hole diameter approx. 28 mm - Hole spacing (center-to-center) approx. 100 mm Iedexz Axpepfx Adnoa - Weight approx. 1000 kg

Year of construction: 2019, condition: used, functionality: fully functional, Miltenyi Biotec Clinimacs Prodigy Automated Cell Processing System. Dimensions 73.5 cm × 40 cm × 48 cm (w × d × h) Weight approx. 70 kg Input voltage 100–240 V~ Ijdpfxsttwx Dj Adnea Power consumption 810 W Frequency 50/60 Hz Pump speed 2–400 mL/min Atmosphere control Gas mix unit for CO2, compressed air, and N2; min. pressure: 1 bar, max. pressure: 2.5 bar Temperature control +4 °C to +38 °C Centrifugation Max. 2,500 rpm (400×g) Microscope camera Max. magnification: 400-fold Monitor 10.1” TFT touchscreen MACS tube sealer For sealing CliniMACS Prodigy Tubing Sets PVC tubes Types of starting material Leukapheresis, bone marrow, cryopreserved PSCs Available cell processing steps Cell washing, density gradient centrifugation, cell activation, fluorescent antibody labeling of cells, cell depletion and / or enrichment via magnetic cell separation, viral transduction, cell expansion, expansion and differentiation of adherent cells, cell culture and medium exchange, formulation of final cell product Tubing Sets and accessories Dedicated CliniMACS Prodigy Tubing Sets and Accessories available IPC/QC Integrated IPC/QC sampling pouches allow sterile sample removal Manufacture and availability Manufactured in Germany and shipped worldwide. Good working condition. Please check out our other listings as well.

Condition: as good as new (ex-display), Year of construction: 2025, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Iodedqzbrepfx Adnea Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Year of construction: 1992, condition: ready for operation (used), Offered is a lattice girder/girder welding system year 1992 incl. corresponding stacker SVH 195 year 1992. Girder height: 90mm-250mm, upper chord: 5mm-12mm smooth/ribbed, diagonal: 4mm-7mm smooth, lower chord: 4mm-10mm smooth/ribbed, girder length max.: 14000mm, fixed lengths, cutting grid: 100mm/200mm. 5 coil payoff plates, stacker SVH 195, stacking height max.: 500mm. Inspection is possible by arrangement. Ijdpjxz Ev Rjfx Adnoa

Condition: used, Year of construction: 2015, operating hours: 1,767 h, type of input current: three-phase, overall weight: 800 kg, total width: 1,300 mm, total length: 1,900 mm, total height: 2,080 mm, filter area: 72 m², suction capacity: 5,000 m³/h, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the device. Isdsxyiifjpfx Adnea The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 4 Year of manufacture: 2015 The device has only 1760 operating hours. Fitted with 4 new oval cartridge filter elements. Filtration surface area: 72 m² Fan power: 5.5 kW Capacity: 5,000 m³/h Inlet diameter: 200 mm Dimensions: Height: 2.08 m Width: 1.90 m x 1.30 m Base: 1.40 m x 1.10 m Warehouse number: 1079

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (max.): 300 A, Zu verkauf: Lascentrum Multimig 300 MV 300 AMP 400 Volt Gas-cooled 2/4 Step 4 Roller drive Stick option Steel and Stainless Steel weldable Refurbished, tested, and serviced Including MIG Welding torch, earth work lead with clamp, and gas cable. Iodjxyhx Ejpfx Adnsa Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, electrode welding machine Isdpfx Ajxyfnwsdnja -Manufacturer: Kemppi, Welding machine type Master 2000 -Welding current: max. 220 A -Accessories: Welding cable with electrode clamp, ground cable -Dimensions: 480/150/H300 mm -Weight: 18.6 kg

Condition: like new (used), Year of construction: 2022, operating hours: 224 h, functionality: fully functional, Equipment: documentation/manual, USED ONLY 224H, fully functional, water-cooled, and ready for immediate work. We provide a 6-month warranty. The equipment has been checked by an authorized service center and is ready for operation. EWM Phoenix 355 Expert 2.0 plus MM TKM is a high-performance MIG/MAG welding machine, designed for professional and industrial applications. This German-made unit ensures outstanding weld quality, easy operation with synergic programs, and long-term reliability. ⚙️ Technical Specifications* Model: Phoenix 355 Expert 2.0 plus MM TKM Welding current range: 20 – 355 A Duty cycle (40 °C): 355 A (eta) 100% Power supply: 3~ 400 V, 50/60 Hz Cooling system: water-cooled (TKM) Processes: MIG/MAG (standard, pulse, double pulse), ForceArc, RootArc Control unit: Expert 2.0 plus – with synergic programs, memory, and digital display Efficiency: >90 % Wire diameters: 0.8 – 1.6 mm (steel, stainless, aluminium) Weight: approx. 120–140 kg (with wire feeder) ✅ Key Advantages High-quality German EWM technology – robust and reliable. Pulse and double pulse modes – ideal for aluminium and stainless steel. Synergic programs – quick and precise parameter setup. ForceArc / RootArc processes – very stable arc even in challenging positions. Water cooling (TKM) – longer duty cycles and increased torch lifetime. Iedpfxjxdtzte Adnja Used but technically inspected and ready for work.

Condition: as good as new (ex-display), Year of construction: 2025, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Iedpfx Adedqzcvenja Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Year of construction: 1994, condition: ready for operation (used), Offered is a lattice girder/girder production machine year approx.: 1994. Girder height: 80mm-300mm, upper chord: 5mm smooth/ribbed, diagonal: 7mm smooth, lower chord: 5mm smooth/ribbed, girder length max.: 14000mm, cutting grid: 200mm, spool payoff tables: 5 pieces. Inspection is possible by arrangement. Iedpfx Aoxz Ewbjdnoa

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Ijdsvvi N Ijpfx Adnja

Condition: refurbished (used), functionality: fully functional, welding current (min.): 40 A, welding current (max.): 385 A, Note: This is a Trade-in. For sale: Migatronic Mig 385 40-385 AMP 400 Volt 2/4 Step 4 Roller drive 24 Steps adjustable Refurbished and tested Including MIG/MAG welding torch Ijdpoxyhnmofx Adnja Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: ready for operation (used), Year of construction: 2023, Control Unit Brand KUKA Iodpfx Adsxya A Aonsa Model KRC4 Main Drive Number of axis 6 Additional Equipment Component holder (cradle) between the rotary tilting table and the counter bearing. L = 4250mm x 1000mm. 16mm holes as provided. Connection to the faceplates with standard Bräuer drilling pattern (installation height is still to be adjusted to ensure the largest possible turning radius). The component holder is designed for quick change. (Brauer Standard) These KUKA welding robots are featuring a turn-tilt module with a maximum load capacity of 2600kg and a KUKA KL4000 track. If you are looking to get high-quality welding capabilities, consider this pack of weding robots we have for sale. Contact us for more information about it. Application Types Welding

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 1,040 mm, total width: 560 mm, total length: 960 mm, overall weight: 130 kg, warranty duration: 6 months, type of cooling: water, Equipment: documentation/manual, The equipment has been checked by an authorized service center and is ready for operation. USED ONLY 178H We provide a 6-month warranty. EWM TITAN XQ 400 puls C W EX WIFI R1 5m is a top-class German MIG/MAG semi-automatic welding machine, designed for professional and industrial use. It stands out with its high performance, advanced synergic programs, and innovative AC/DC pulse mode, which ensures excellent welding results on steel, stainless steel, aluminium, and non-ferrous metals. The integrated WiFi interface allows convenient remote operation, software updates, and seamless integration into a smart production environment. Model: TITAN XQ 400 puls C W EX WIFI R1 (with 5 m cable) Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A (eta) 100 % Iodpfxjxdni Ss Adnsa Power supply: 3~ 400 V, 50/60 Hz Cooling system: water-cooled (W version) Processes: MIG/MAG, pulse, double pulse, forceArc, rootArc, AC Arc Wire diameters: Steel: 0.8 – 1.6 mm Aluminium: 1.0 – 1.6 mm Efficiency: >90 % Dimensions (L×W×H): approx. 960 × 560 × 1040 mm Weight: approx. 130 kg German quality and reliability. AC/DC pulse – ideal for welding aluminium and alloys. Synergic programs – fast and precise parameter selection. WiFi interface – remote control, updates, and network integration. High efficiency (>90 %) – reduced energy consumption. Mobile trolley – easy transport within the workshop. Compatible with robotic systems via additional interfaces. Automotive industry Stainless steel and aluminium structures Shipbuilding Serial and robotic production Industrial constructions and metal fabrication

Condition: used, Auction item. Fiber optic cable welding machine in working condition. Sold as seen in the photos. Isdpoxztnnsfx Adnsa

Condition: used, Year of construction: 2019, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24. Ijdoxzrzgspfx Adnsa Year: 2019 Country of origin: Sweden. Size (L x W x H): 1150 x 620 x 1100 mm. Weight: 90 kg. With Esab water cooling unit, TA24 control panel and 4 m. TIG-hose. Machine have been tested and serviced.

Condition: good (used), functionality: fully functional, machine/vehicle number: 19564, total height: 1,480 mm, total length: 1,000 mm, total width: 510 mm, type of input current: three-phase, overall weight: 190 kg, product height (max.): 2 mm, input voltage: 380 V, Spot welding machine APLICACIONES ELÉCTRICAS SERRA model SP-7N, pre-owned, in excellent condition and ready for operation. Robust and reliable unit, ideal for workshops, industrial maintenance, or series production. Advantages: - Solid and durable construction. - Perfect for continuous and demanding tasks. - Preventative maintenance performed regularly. Isdpfxsw I Su Uo Adnoa - Available for immediate shipping or collection.

Condition: like new (used), Year of construction: 2022, operating hours: 4 h, functionality: fully functional, type of input current: three-phase, total height: 960 mm, total width: 560 mm, total length: 1,040 mm, overall weight: 130 kg, warranty duration: 6 months, electrical fuse: 400 A, Equipment: documentation/manual, The equipment has been checked by an authorized service center and is ready for operation. Condition: Almost NEW (used 4h) Warranty of 6 months Model: EWM Titan XQ R 400 AC puls Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A (eta) 100% Power supply: 3~ 400 V, 50/60 Hz Processes: MIG/MAG standard, pulse, double pulse, forceArc, rootArc, AC Arc TBI BRG-2-ES-DEA attachment for automatic cutting and nozzle cleaning. Wire diameters: Steel: 0.8 – 1.6 mm Aluminium: 1.0 – 1.6 mm Cooling: Water-cooled (integrated cooling unit) Efficiency: >90% Dimensions (L×W×H): approx. 960 × 560 × 1040 mm Weight: approx. 130 kg Robot Interface Equipped with robotic interface (digital/analog I/O and Fieldbus options). Compatible with major robot brands: ABB, KUKA, Fanuc, Yaskawa, Panasonic, Kawasaki, OTC. Full integration possible – process parameters controllable directly via robot controller. German quality – designed for continuous industrial use. AC/DC pulse technology for aluminium and non-ferrous metals. Large database of synergic programs for easy setup. High energy efficiency, reduced operating costs. Ijdpfx Adexdncxsnoa Ready for manual welding or complete robotic integration. Mobile trolley with 4 wheels for easy handling.

Condition: used, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24 AC/DC. Country of origin: Sweden. Size (L x W x H): 1150 x 660 x 1150 mm. Iedoxzrw Uepfx Adnsa Weight: 125 kg. With Esab CoolMidi 1800 water cooling unit, TA24 AC/DC control panel and renovated SR-20 8m. TIG-hoze. Machine have been tested and serviced.

Condition: used, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24 AC/DC. Country of origin: Sweden. Size (L x W x H): 1150 x 660 x 1150 mm. Weight: 125 kg. With Esab CoolMidi 1800 water cooling unit, TA24 AC/DC control panel and renovated SR-20 4m. TIG-hoze. Machine have been tested and serviced. Iodpfx Aexzru Hodnsa