Used Welding Robot Cell for sale (8,607)

Condition: good (used), ABB 2-Station Welding Robot Cell You are bidding on a professional, fully functional 2-station robot welding cell for continuous industrial use. This system is ideal for the automated and highly efficient MIG/MAG welding of small to large production runs (e.g., in the automotive or machine-building industries). Thanks to the clever two-station principle (shuttle table/parallel stations), the operator can safely load new parts or remove finished workpieces on one side while the robot productively welds on the other side. System Components: 1. Industrial Robot & Controller (ABB): - Robot controller: Reliable and robust ABB S4 / S4C generation - Programming teach pendant: Original ABB teach pendant with joystick for precise programming (teaching) of welding paths. - Additional axes: Both stations have synchronized, motorized rotary axes (nameplate: ABB / ELMO, type: PS 60/4-50-P-LSS-3985) for optimal positioning of the workpiece in the tandem welding process. 2. Welding Technology (Carl Cloos Welding Technology GmbH): - Welding power source: Cloos GLC 503 QUINTO (Powerful 500A MIG/MAG system) - Cooling: Integrated liquid cooling (water cooling) for maximum duty cycle of the welding torch. - Accessories: 2x professional WDI ECORACK large container wire spools on mobile frames, including robust wire guide hoses to the robot. 3. System Control & Safety: - Control unit (HMI): Modernized Siemens SIMATIC HMI touch panel for easy control of the entire system, piece count monitoring and error analysis. - Safety: Complete, enclosed protective cabin (transparent protective walls against UV radiation and welding spatter) including integrated extraction system (hose package on the robot arm). - Inspection: The system was in industrial use until recently (including certification for well-known automotive suppliers) and has a valid DGUV regulation 3 inspection sticker. "Everything from a single source: We will gladly offer you suitable bank financing for your project." More items - new and used - can be found in our shop! Dodpfx Asztkb Nol Aeku International shipping costs on request!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Djdpferl S Ufex Al Ajku Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps Dodsznd Skopfx Al Ajku - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Dodpfx Alswypqlo Ajku Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: good (used), Dimensions: 4200 x 2750 mm Djdpfxjhtzgpo Al Aeku Height: 2400 mm

Condition: good (used), Dimensions: 5500 x 2750 mm Dksdpfx Aehtzgdsl Aou Height: 2400 mm

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Dedpfx Aswc A Rdsl Aeku

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. Dkedpfx Ajp Am T Ujl Asu The stand is ready for launch.

Condition: ready for operation (used), Year of construction: 2025, number of axes: 7, This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details. - only 5 working days of operation, perfect conditions- warranty until Jan. 2027- Technology: Steel Transfer Technology / Pulse MIG/MAG- Cobot / Robot Brand: Universal Robots- Cobot / Robot Model: UR10e- Cobot Year of Manufacture: 2025- Welding Table Brand: Siegmund (Extreme 8.7 series, perforated grid pattern)- Extraction Unit Brand/Model: Fumator Absaugtechnik / Minivac 200D- Extraction Unit Controls: Start, Stop, Filter Reset, Suction Power Regulation- Included Documentation: German User Manual (UR10e) and Heidenbluth documentation binders- System Configuration: Robot mounted on a linear 7th-axis track system running alongside the welding table- Additional Equipment: Welding torch, hose packages, integrated cable carrier chain (energy chain), control cabinet with main switch, teach pendant, shielding gas cylinder rack Dodpjzic Elsfx Al Aeku

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of cooling: water, Equipment: cabin, For sale is a ready-to-use, compact, plug-and-play welding cell: OTC Easy Arc MIG/MAG 3.03. This system combines precise robotic technology with a high-performance, high-end welding power source and a fully automatically controlled horizontal rotary positioner. It is ideally suited for the automated, cost-effective production of small and medium-sized series. The entire cell is mounted on a stable base frame with a welding table/perforated plate and can be easily integrated into your production process. Technical highlights & components: Robot FD-B6: Highly dynamic 6-axis articulated arm robot, optimized for arc welding with internal cable routing (6 kg payload). Controller FD11: Modern robot controller for precise path guidance, including an ergonomic teach pendant for quick programming. Welding power source Welbee Inverter P400: Pulse welding power source (400 A) for spatter-free welding of steel, stainless steel, and aluminum, even at high welding speeds. Easy Arc PB250 Positioner / Horizontal Rotary Table: Fully controlled additional axis (up to 250 kg payload) for precise workpiece rotation, which enables welding in the optimal weld pool position, even with complex components. Safety concept: Complete enclosure including welding protection viewing windows and CE-compliant safety technology for direct use in a workshop. Condition & scope of supply: The system is in very good, fully functional, and ready-to-use condition, as it has been used only rarely. Scope of supply: Complete welding cell as described, including welding torch equipment, cable package, and documentation. The system is available immediately and can be inspected under power after consultation. Technical data at a glance: Manufacturer: OTC DAIHEN Europe GmbH Model: Easy Arc MIG/MAG V03.03 Year of manufacture: 2024 Power connection: 400 V / 50 Hz B2B sale with exclusion of all warranties. Subject to prior sale. Net price plus VAT ex Philippsburg. Loading can be arranged on-site. Components: Robot welding cell as shown OTC welding robot Easy Arc MIG/MAG 1.03, robot FD B6 Easy Arc PB250 (Move) programmable positioner for automatic component alignment Controller FD11 Welding machine Welbee P400 Additional equipment: Water cooling Dedpszvqunjfx Al Asku If you have any questions or require further information, please send us a message or call us. An inspection and demonstration are possible at any time.

Condition: used, Year of construction: 2001, operating hours: 12,790 h, Easy-to-use welding cell equipped with an ABB IRB140 robot and an S4C+ M2000 control system, as well as Fronius TPS welding equipment. A convenient solution for smaller welding projects, with a design that makes it easy to position and move as needed. Only a pallet truck is required to move it. The cell has primarily been used for trial welding and demonstrations. Dkjdpfx Alsz Apzyj Aju Specifications: - ABB IRB140 - ABB S4C+ M2000 control system - Fronius TPS welding equipment - Compact design - Suitable for smaller welding projects - Used for trial welding and demonstrations - Easily moved with a pallet truck

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Dodsnr E Enjpfx Al Asku Plant can still be visited in operation.

Condition: used, Year of construction: 2025, functionality: fully functional, BK automation robotic cell with a Yaskawa robot arm, safety enclosure, and conveyor belt. Equipped with a control panel with a screen and a signal tower. Details: Brand: BK automation Robot/robot controller brand: Yaskawa Construction: stainless steel frame with transparent shielding (plexiglass) Function: packaging of small units by folding, gluing, and sealing boxes Transport: conveyor belt(s) Operation: control panel with screen, push buttons, and emergency stop Signaling: signal tower (red/yellow/green) Marking on machine housing: BK automation Dimensions: 475x155x235 cm Accessories: various additional holders in different sizes Dksdpfoz Ip R Njx Al Aeu Condition: used Please note: disassembly and removal costs are mandatory for this lot and will be borne by the buyer. An external company (Auction Logistics) will handle the disassembly, prepare the item for transport, and load it onto your truck. These costs will be fully borne by the buyer. For this lot, these costs amount to €325, excluding VAT.

Condition: good (used), Year of construction: 1997, operating hours: 20,000 h, Kuka KR 30/2 – 6-axis industrial robot Manufacturer: KUKA Model: KR30-2 Rated total load: 30 kg Reach: 2000 mm Repeatability: ± 0.15 mm Controller: KUKA KR C1 Kuka Teach Pendant KR C1 Weight: 867 kg Year of manufacture: 1997 Operating hours: approx. 20,000 Robot applications: Loading and unloading of parts Machining Parts handling Polishing Arc welding Palletizing Robot movement speed: Dkedpfsxgqmljx Al Aeu Axis 1: 140°/s Axis 2: 126°/s Axis 3: 140°/s Axis 4: 260°/s Axis 5: 245°/s Axis 6: 322°/s More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. Dksdjy Efmgspfx Al Aju This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: ready for operation (used), Year of construction: 2004, number of axes: 6, Welding robot manufactured in 2004. This ABB IRB 2400L Welding Cell features a robust design with a positioner model ABB IRB 500R and includes Fronius TPS 4000 welding equipment. It comes equipped with essential safety features such as a light curtain and safety fencing. If you are looking to get high-quality welding capabilities, consider the ABB IRB 2400L Welding Cell we have for sale. Contact us for further details. Djdpfx Aljzhmrye Aeku - Industrial Robot Model: ABB IRB 2400L- Positioner Model: ABB IRB 500R- Welding Equipment: Fronius TPS 4000- Supply Voltage: 3x400V/PE/N- Cable Cross-section: 5 x 16 mm²- Fuse Protection: 63 A delayed- Compressed Air Requirements: 6 bar, G1/2"- Robot Control Cabinet: Included- Machine Sequence Control Cabinet: Included- Robot Base Height: 800 mm- Safety Equipment: Light curtain, safety fencing, glare protection partition wall, service door (monitored by ABB), rear access protection (mechanical, h=1100mm)- Maintenance Units: Torch cleaning system, TCP Calibration unit- Control Stations: Main start panel, Pre-Reset button- Footprint Dimensions: Approx. 8025 mm (length) x 5500 mm (width)- Center-to-center distance: 2000 mm x 1200 mm turning circle- Load capacity: 500 kg per side of the table / Maximum load difference: 350 kg- machine hours: 68.107h- contains an S4C controller

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Lifting capacity: 20kg Dedpfx Aler Aka Ae Ajku Reach: 1726mm

Condition: good (used), Year of construction: 2013, 1 used robotic welding system Manufacturer: Yaskawa/Motoman Year of manufacture: 2013 With 2 robots (load capacity: 1 x 165 kg, 1 x 50 kg) Each with 1 x WIG AC and DC welding system from EWM, 1 x spot welding tongs from Dalex, and 2 swiveling fixture systems Year of manufacture: 2013 Suitable for welding housings made of steel, stainless steel or aluminum Technical specifications Robotic welding system – Specifications / Equipment Robotic welding system Dimensions W x D x H: 16,000 x 6,000 x 2,500 mm - Control system S7 for fixture Double welding cell with 2 maintenance doors and 2 loading stations - Opaque enclosure Robots / Positioners 2 Motoman 6-axis welding robots 1 x 50 kg version 1 x 165 kg version Dksdjz Aac Uspfx Al Asu - Extended design 2 x bases 1 x control unit with operator panel DX - Master - Slave 1 x floor-mounted chassis with 2 parking stations 2 stations - rotary tables with integrated pneumatics for "clamp on" function Centrally programmable in sync via 1 robot control unit Media feedthrough for compressed air and electrical signals in the positioner Design and manufacture of a base frame for part support Welding and clamping table S 4 3,000 x 1,500 mm with tool set 2 Digital I/O card for welding equipment EWM WIG welding system Tetrix 422 DC - RC Article no.: 520000050019 For automated and robotic applications Inverter DC welding unit Standard interfaces for automation (Start/Stop, pilot voltage, current flow), optional interfaces TETRIX RINTX11, industrial bus interface TETRIX BUSINTX11, documentation interface PCINT X10 (+ software Q-DOC 9000), and monitoring and documentation system WELDQAS Controllable parameters with interfaces: 256 jobs (welding tasks) with 16 programs each in program mode, as well as wire speed, correction of arc length and arc dynamics via pilot voltages, etc. Connection options: Remote control, optional interfaces for automation, documentation and PC connection Output 5 - 420 amps 420 amps 60% duty cycle - 40 °C 360 amps 100% duty cycle - 40 °C Power supply 400 volts (-25% / +20%) Dimensions 654 x 576 x 374 mm Additional cost for AC/DC version – 1 unit EWM WIG cold wire feeder Tetrix Drive ROB Article no.: 520000040018 Quantity: 2 units Lightweight, compact wire feeder for mounting on a robot or fixture 4-roller drive Connection for water cooling Control with digital incremental encoder Push-pull capable Separate button for wire retraction, gas test and wire threading Parameter setting and storage centrally via welding system control unit Wire speed 0.1 to 5 m/min Wire feed steps 0.01 m/min Weight 6.5 kg Dimensions 345 x 230 x 250 mm Left-opening design ABITIG WH torch system Alternating neck technology Push-pull drive for precise wire feed Water-cooled Output 400 amps Torch holder and changing station with pneumatic locking Design and manufacture of a part support for aluminum rear panel Resistance welding equipment / other components Resistance welding equipment for robot, consisting of - Medium frequency inverter power source - Transformer with 250 kVA rated power - X-welding tongs High-performance water chiller Design and engineering Documentation such as machine design and parts lists in a simple form in German CE declaration Welding fume extraction system with piping

Condition: ready for operation (used), An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible. Dkodpfsv H Dfxsx Al Aeu

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder .) Fronius intermediate hose package Dedpfx Alohzhynj Aeku .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Germany approx. 230 Euro Europe on request All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Thielmanni nozzle cleaner SICK curtains Installed 2021 Robot station is fully operational, in good condition and can be seen in use. Djdezu Irnjpfx Al Ajku

Condition: ready for operation (used), Year of construction: 2012, number of axes: 10, Welding robot manufactured in 2012. This CLOOS C50 welding cell features a QRC 350 robot model and includes a Qineo Pulse 450 welding power source. The system is equipped with a linear track axis configuration, mechanical torch cleaning station, and dual-station components. It also has protective safety enclosure fencing and rotatable workpiece positioners. If you are looking to get high-quality welding capabilities, consider the CLOOS C50 welding cell we have for sale. Contact us for further details. Dodpfjzg Ht Ijx Al Ajku - Robot Model: QRC 350 (girOX QRC 350)- Control Version: QC6- Welding Power Source: Qineo Pulse 450 (CAN)- Power Supply: 400 V / AC, 3-Phase, 50 Hz- Connected Load: 12 kVA (System Sheet specifies 45 kVA max system load capability)- Back-up Fuse Required: 25 A (System Circuitry specifies max 63 A)- Control Cabinet Dimensions: 800 mm x 1900 mm x 600 mm- Control Cabinet Weight: 300 kg- Peripheral Components Included:* Linear track axis configuration* Mechanical torch cleaning station* Dual-station components (Station 1 & Station 2 Manax operating pendants)* Dual safety light curtains (Leuze MLD310 / 0-8 Meter)* Protective safety enclosure fencing with automated swing doors* Rotatable/tiltable workpiece positioners (Positioner 1 Axis 8/9 & Positioner 2 Axis 10/11)* Grounding cable assembly: 95 mm²* Potential equalization wiring: 50 mm²- Pneumatic Requirements: Compressed air supply approx. 6 bar, integrated regulator set to 5.5 bar

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. If you have any further questions, please do not hesitate to contact us. Dkjdszkanajpfx Al Asu

Condition: like new (used), Year of construction: 2014, operating hours: 715 h, functionality: fully functional, machine/vehicle number: L62500, arm reach: 1,919 mm, total height: 3,200 mm, total width: 4,600 mm, total length: 5,200 mm, input voltage: 400 V, type of cooling: water, We are offering a Yaskawa TIG welding cell from October 2014 in as-new condition, with very few documented operating hours. The unit was used briefly and then decommissioned, as we no longer produce the components for which it was originally acquired. Dedpfx Alsx Exl No Ajku The system features a rotary table with a maximum capacity of 1000 × 1500 mm, enabling the alternate machining of two parts to optimize cycle times and maximize productivity. It is also equipped with a push-wire (wire feeding) system, useful for overlay welding or areas lacking base material. The installed TIG technology is high-performance, designed for applications demanding high-quality and repeatable weld seams. Technical support is available via Roboteco S.p.A. (Yaskawa), offering reliable after-sales service and an international support network. The machine is immediately available and located in Tre Ville (TN), Italy. The asking price includes: - Professional dismantling - Loading onto the buyer’s transport vehicle Detailed photos and further technical specifications are available upon request.

Condition: excellent (used), Bosch Scara SR 800 robot with controller + cell – articulated arm robot with gripper. Dsdpfoyfhn Sjx Al Asku You are purchasing a fully functional Bosch Scara SR 800 robot with controller and complete cell. Upon request, we can also ship only the robot without the cell. Everything is in working order and has been regularly maintained. You can find more new and used items in our shop! International shipping costs available upon request!