Used Welding Rotator for sale (12,527)

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Ijdpfxeyrg Hys Afueba

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Isdpfxsyrg H He Afujba

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. Ibedewtq Dtepfx Afusa The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: used, Year of construction: 2003, Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Isdpfx Afjzmxvbeusba Year of construction: 2003 Maxi Capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Voltage: 220 V mono Total dimensions on support: 400 x 400 mm x H 1100 mm

Condition: used, Welding Rotator SAF POSISAF 1E Ijdpfx Afszmxu Douoba Shelf diameter: Ø 295 mm Max capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Equipped with one 3-jaws concentric chuck Ø 200 mm Voltage: 220 V mono Dimensions on support: L 800 x W 450 x H 1200 mm

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° Ibsdpfszmxukjx Afuoa New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: Kistler, Tilting welding turntable with mobile base -Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8 m/min at Ø 400 mm -Direction of rotation: clockwise/counterclockwise -Axles: 2 pieces -tiltable: hand -Height adjustment: No -Quantity: 1 piece available -Overall dimensions: 740/580/H630 mm Ibjdeh D Il Topfx Afuea -Weight: 145 kg

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding device, welding rotator, welding rotator and tilting table, welding rotator Ibjdpfedwpdujx Afuja -Maximum load: 75 kg -Clamping diameter: 300 mm -Hollow shaft: Ø 42.5 mm -Drive: 0.1 kW -Speed: RPM -Axes: 2 pieces (swivel by hand) -Quantity: 1x welding rotator available -Price: per piece -Dimensions: 830/450/H920 mm -Weight: 174 kg

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Column adjustment electrically driven on both sides Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Ibsdjwtxxrepfx Afusa Rotating drive: 2 x 2.2 kW Torque: 18,950 Nm Machine is also available individually as Mono model (more affordable) Optional with articulated flange (Cardan flange)

Year of construction: 2025, operating hours: 300 h, condition: like new (used), Equipment: CE marking, TECHNICAL DETAILS: Drive Unit: Model: VM800T. Maximum load capacity: 400 t. Turning capacity: 800 t. Maximum speed: 108 cm/min. Minimum speed: 20 cm/min. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 6,360 mm. Width: 1,544 mm. Height: 1,565 mm. Weight: 15,300 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm. Power: 2 motors of 7.5 kW with primary epicyclic gearboxes and secondary worm gearbox. Idler Unit: Model: VC800T. Maximum load capacity: 400 t. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 5,852 mm. Width: 1,500 mm. Height: 1,565 mm. Ibodpfx Ajy Ex D Ssfusa Weight: 12,720 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm.

Condition: good (used), Year of construction: 1980, Offer 24518 Technical data: - Load capacity 150 kg - Cross supports + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotation continuously adjustable - Right-hand and left-hand rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg Isdpfxjvtnyye Afueba .

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic Iedpfxjfvqmxj Afujba

Condition: excellent (used), Machine ready for operation. 1000-litre tank. 500-litre tank. The station was used for cleaning a soup and mayonnaise production line. Please check my other listings as well. Ibsdpfx Aoytm Tisfuea

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. We can also produce your friction welding joints, up to 300 tons of clamping force. Iodpfxjv Uzf Es Afusba Please contact us for further information!

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine Ijdjxy Hqtopfx Afujba -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Ijdpfx Afozkkayousba Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Ijdpozimbkofx Afueba Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Ibjdok Radijpfx Afusa Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components Ibsdpfswzv D Iex Afuoa For more information or a consultation, the Airtech team is happy to assist you!

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length Ibodpfx Afoxlr Tdjuea voltage: 380v 50 Hz

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Isdjrl S Ufspfx Afujba Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane Ijdpfxeza T A Ro Afueba

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! Isdpohzhynsfx Afusba We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Germany approx. 230 Euro Europe on request All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: EQWDCOM, type of input current: AC, ZDI Quality Welding Consumables, Wires, Rods Ibedpfx Aeyaw Haofusa TIG Welding, Robotic Welding, Qualified Manufacturer, Quality Guaranteed. Wires, Rods, Stainless Steel, Nickel and Nickel Based Alloys, Strip Cladding. ERNiCrMo-3, ERNiCrMo-4, etc.

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine SURE3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: The SURE handheld laser welding system with 3,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and flexible to use. Highlights and Features: Power: 3,000 watts for the highest welding quality and speed Laser wavelength: 1080 nm, continuous operation with a modulation frequency of up to 20 kHz Handheld laser welding head – optimally positioned for comfortable operation Robust housing, intelligent internal structure for maximum service life Touchscreen display for easy operation Ibjdpey R I Tgjfx Afuja Automatic multi-function wire feed possible Safety features: Three-color alarm, safety interlocks, protection mechanism against incorrect operation Cooling via a separate water circuit with a 13-liter tank volume CE-certified components according to European standards. Your Advantages Work safely thanks to extensive protection mechanisms and alarm systems Flexible application possibilities, including automatic wire feed and robot integration Low operating costs and easy maintenance thanks to well-designed technology and durable components.