Used Welding Cell for sale (6,290)

Condition: used, Technical details: welding current - continuous: 320 / 100 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg Podpfx Aou Nwa Ssmkopt dimensions of machine: 1,3 x 0,5 x 0,9 m - TIG welding with direct current - TIG welding with pulsed current - E-hand welding Control switchover 2/4 cycle spot welding, stepless New components like: -hose package 4,0 meter, water cooled -ground tongs and ground cable 4,0 meter -pressure reducer -TIG welding torch ERGO 301 *

Condition: used, Technical details: Ppodpfx Ameu Nwctekot capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg dimensions of machine: 1,05 x 0,70 x 1,2 m capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 Isolation class F incl. wire feed device, feed rate 0,5 - 20 m/min *

Condition: used, Technical details: throat min.: 2600 mm Ppedpfx Amsu Nwyrjkst throat max.: 4200 mm Support arm position: 360 schwenkbar ° weight of the machine ca.: ca. 1,75 t dimensions L x W x H: L:5,0xB:1,6xH:2,8 m space requirements of the machine approx.: 6,61x1,4x2,8 m WELDING STATIVE for positioning a welding torch/welding source on large wide workpieces. - The device for adjusting the gas cylinder is integrated in the frame. - Dm of the base frame = 1480mm - All adjustments are made manually. - With welding device Make: KOLBE; Type: SC 400 - 400A; protection P21; cooling E; input 380V/21kVA; welding 400V / 34V; water cooled; - Welding steps: 3x coarse and 12x fine - feeding device (removable) with 13,5m cable to the welding device - Hose package water cooled (4,0Meter) *

Condition: used, Technical details: welding current: 440 V Ppjdpfovz Advsx Amkjt weight of the machine approx.: 242 kg dimensions L x W x H: 1,5 x 0,8 x 1,3 m MIG/MAG control unit: with 2/4-cycle switchover with 3x12 welding stages Cooling system: water-cooled with frost protection Shielding gas with solenoid valve and pressure reducer Hose package 3.6 m long Torch head Ground clamp with ground cable 4.8 m long Wire feed with 4 roller drive for wire diameter: Ø 1.0 mm/Ø 1.2 mm *

Condition: used, Technical details: welding current: 520 A Length: 1200 mm height: 1100 mm weight of the machine approx.: 147 kg Ppedpswc R Udjfx Amkst dimensions L x W x H: 1,2 x 0,75 x1,1 m Welding process TIG/E/MIG-MAG Delivery consists of: Welding transformer, feed unit, cooling unit Protection class IP23C Insulation class B/H *

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA and electric welding hand Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Ppsdpju U Ihzofx Amkjt Protection class IP 23 Water-cooled and frost protection Gas-cooled torch head with remote control for welding current Shielding gas / solenoid valve Equipment: Hose package 7.0 meters Ground clamp and ground cable 3.3 meters *

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 300 kg, Welding rotary table KT 600, with 100mm through hole Load horizontally 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Table diameter 650mm Height 700mm, width 800mm, length 800mm Weight 155 KG Ppedpfx Asvu Dpyjmkjt Infinitely variable electric tilt range 0 – 90° Speed 0.2 – 1.9 rpm Welding current transmission max. 500 A Incl. hand remote control and foot remote control Surcharge: Quick-release jaw chuck Diameter 500mm, €750 CE mark/approval

Condition: excellent (used), Year of construction: 1999, Welding machine make DALEX Type:VARIO MIC 400L year 1999 Ppsdpfefgvvaex Amkot in very good condition, little used.

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, waist belt, air hose, charger, Speedglas carrying bag, battery. Condition: used equipment, normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, complete set as shown in the photos. Applications: MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Pedpfxey Ucnao Amkjpt Shipping by courier or personal pickup is possible.

Condition: good (used), Year of construction: 2016, Esta welding fume extraction system SRF K10 FM IFA W 3 230 Volt, max. 950 m³/h, with automatic filter cleaning, suction nozzle 3 meters. Ppjdey Uch Tepfx Amkst

Condition: good (used), Year of construction: 2010, Offer 25338 Ppedpfxozaa Aws Amkjt Technical data: - Length 1300 mm - Width 800 mm - Plate height 215 mm - Wall thickness 15 mm - Hole diameter of the perforations approx. 28 mm - Center distance of the perforations, each approx. 100 mm - Table height approx. 970 mm - Total weight approx. 400 kg

Condition: used, machine/vehicle number: 0706-2414-0002-8, Lorch – WIG Inverter V 40 AC/DC, compact, water-cooled unit, mobile, including power cable, power plug, and operating manual. V 40 at a glance: Outstanding WIG welding characteristics thanks to inverter technology. Inverters offer high efficiency and excellent welding properties because the digital software control technology has a significant influence on the welding result. In a robust, fully loadable industrial housing. The robust metal housing protects the high-end technology inside the unit. The device can be fully loaded via the handles, allowing it to be suspended from a crane. Remote control. Often, the working situation does not allow the welding machine to be placed directly next to the welder. To still be able to intervene in the welding process and adjust the welding current, the remote control is a helpful option. Therefore, various hand and foot remote controls are available for the Lorch V series and can be used immediately thanks to the plug & play function. LorchNET connection. The Lorch V series has a LorchNet connection. This digital data interface ensures standardized communication and guarantees that all components in a Lorch automation system communicate perfectly with each other via Plug & Weld. Aluminum welding (AC/DC version). Ppjdpfx Amsy U Uq Hekst Positive pulse ignition and cap control ensure perfect arc shaping during aluminum welding. The special alternating current waveform with optimized current balance creates a good cleaning effect and a manageable weld pool. Powerful. State-of-the-art processor technology ensures optimal interaction between gas preflow, arc shaping, and welding current control during welding. The unit achieves absolute top values in terms of duty cycle and increases your productivity. TipTronic. Powerful. Pulsing and fast pulsing up to 20 kHz. LorchNet connection. Low energy consumption.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Pjdpfxsy T Ulzs Amkspt Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 14100201-03, Four-head welding line, KMW brand, for PVC window profiles Overall machine dimensions: L: 4450 mm, W: 4480 mm, H: 1600 mm In good working condition The machine is also equipped with an additional belt-type output conveyor Podey U T Iqspfx Amkspt Manufacturer’s documentation is provided, including electrical diagrams, pneumatic diagrams, and a user manual.

Year of construction: 2015, condition: used, Power consumption 12,5 KVA Power factor 0,95 rated capacity 10 kW Output current 560 A eff Podpfxjy T Sc Dj Amkspt output voltage 1500 V eff In our estimation, the machine is in like-new condition and can be inspected under power by appointment. - Includes various accessories Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, resistance welding machines, roll seam welding machines ELREX Type 3x ET70.0.G Mfg. No. Year of manufacture approx. 1990 Consisting of three water-cooled transformers with a water-cooled rectifier block Performance data: Total power at 50% duty cycle 210 kVA (total power from 3 transformers) Secondary voltage 7 - 10.5 volts (adjustable in 4 steps via connection terminals on the transformer) Secondary current at 50% duty cycle 20.1 kA (total power from 3 transformers) Primary connection 380 volts, 50 Hz (three phases) Consisting of three transformers - data for a single transformer: Power at 50% duty cycle 70 kVA (power per transformer) Secondary voltage 7 - 10.5 volts (adjustable in 4 steps via connection terminals on the transformer) Secondary current at 50% duty cycle 6.7 kA (per transformer) Primary connection 380 volts, 50 Hz (two phases) Cooling water requirement per transformer 4 liters/min. Insulation class F - Water-cooled transformer - A water-cooled rectifier block is located on the secondary side. - Connection of the DC power output via contact surfaces 50x50mm with M20x1.5mm thread Ppodpfodzp Txex Amkst - Temperature monitor on each rectifier element and on each transformer coil - Connection cable 7-core, cross-section 50 mm², length approx. 6 m Overall dimensions WxHxD 700 x 710 x 440 mm Total weight 480 kg in good condition

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Psdpfxey T Iyro Amkept Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Year of construction: 2007, condition: ready for operation (used), Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible. Psdpfxoy U Nrfj Amkjpt

Condition: new, We are offering our remaining stock of garden furniture for sale. These are new items. All items are unused. If you are interested, please contact us. Podpfx Asv Duhrsmkspt

Condition: new, functionality: fully functional, type of input current: three-phase, total height: 575 mm, total width: 300 mm, total length: 600 mm, input voltage: 400 V, overall weight: 39 kg, type of cooling: air, electrical fuse: 32 A, sheet thickness aluminum (max.): 8 mm, welding power (max.): 13 kVA, open-circuit voltage: 70 V, welding current at 60% duty cycle: 280 A, welding current at 100% duty cycle: 250 A, input current: 15 A, protection type (IP code): IP23, welding current (min.): 300 A, welding current (max.): 10 A, Professional inverter TIG/MMA welding machine LogiTIG 300 AC/DC for sale. Suitable for welding aluminum, stainless steel, and mild steel. The machine supports TIG AC/DC and MMA modes, and features HF ignition, pulse function, 2T/4T modes, adjustable AC frequency, and balance control. This unit offers a high duty cycle of up to 300 A, making it suitable for professional and industrial applications. Compatible with foot pedal and remote control connections. Pedpfxoy U E Rwj Amkopt

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA Ppodpfx Asy Ty Dcomkjt voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: good (used), Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller Ppjdpfxogrlppe Amket -Manufacturer: Fronius, remote control RCU5000i .: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt Pedpfx Asu N I Eremkjpt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 250 kg, warranty duration: 3 months, type of cooling: water, hose package length: 15,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, 2x ESAB Origo Mig 502cw - Water-cooled MIG/MAG welding machines Completely overhauled, serviced, tested, and ready for immediate use. Specifications: 20-500 AMP 380 Volt Water-cooled 2/4 cycle 4-roller drive Adjustable post-flow time Electrode option Included: Parweld PRO5000 3-meter welding torch, ground cable, gas hose, 15-meter connecting cable, and gas hose. Visits are by appointment only. Test welding is possible. A video of the machine in welding operation can be provided. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries within and outside of Europe using Euro pallets per shipment. Podpfx Amsy Ux Eujkspt All of our machines have been serviced and are 100% operational, unless otherwise stated. The images above show the actual machine. We can also offer you other types of machines, such as: Used, new, MIG, MAG, CO2, TIG, pulse, AC/DC, plasma, water-cooled, electrode. We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You are always dealing directly with Cjays Lastechniek and never with third parties.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 345 mm, total width: 219 mm, total length: 568 mm, input voltage: 400 V, ground cable length: 1,000 mm, overall weight: 23 kg, type of cooling: air, electrical fuse: 16 A, welding power (max.): 12 kVA, open-circuit voltage: 50 V, welding current at 60% duty cycle: 220 A, welding current at 100% duty cycle: 180 A, space requirement height: 500 mm, space requirement width: 400 mm, space requirement length: 700 mm, input current: 16 A, continuous power (apparent): 8 kVA, Manufacturer Miller Model STi 270 Main Category Welding Equipment Machine Name / Vehicle Type Industrial Welding Machine Condition Used Functionality Fully Functional Inspection Under Power Yes Description Miller STi 270 industrial welding machine for sale. The unit is fully functional and suitable for professional welding applications. Supports both MMA and TIG welding processes. Compact and durable construction designed for workshop and industrial use. Technical Specifications Input Power 400 V, 16 A, 3-phase, 50/60 Hz MMA Adjustment Range 5–270 A, 20–30.8 V TIG Adjustment Range 5–270 A, 10–20.8 V Duty Cycle at 40% 270 A Duty Cycle at 100% 180 A Open Circuit Voltage 50 VDC (12 VDC)* Welding Processes MMA, TIG Dimensions (H x W x D) 345 × 219 × 568 mm Weight 23.2 kg Features Ppsdey Uxwqjpfx Amkot VDR Lift-Arc Hot-Start Arc-Force