Used Weinig High Mech for sale (500)

Condition: used, Adjustment status for Weinig Powerlock profile Gsdoxga Eqepfx Agfsua

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Gujdpfowmw Dajx Agfja

Condition: excellent (used), length 245 mm width 245 mm height 1090 mm Gusdeylcpdepfx Agfoa

Condition: good (used), Year of construction: 2003, functionality: fully functional, spindle diameter: 40 mm, planing width: 230 mm, working height: 120 mm, rotational speed (max.): 6,000 rpm, Equipment: cabin, Types: Profimat 26, Machine no.: 100272, Year of manufacture: 2003, 5-spindle: U-L-R-O-U, Working width: 20-230 mm, Working height: 8-120 mm, with Ahtue Neumann feed unit Gujdjyq Ab Rspfx Agfja

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove Gsdpfx Aoyatffegfjua 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed 6000 rpm Tool travel radius 125 - 180 mm Folding device Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed 6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed 6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed 6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW Gusdpfx Aewqr Rvsgfoa ----- Diameter 40 mm Speed 6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed 6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central position of lubrication poi...

Condition: excellent (used), CATALOG NUMBER 7164 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm 4 spindles: 1) Bottom horizontal, 220 mm, approx. 5.5 kW 2) Right vertical, 130 mm 3) Left vertical, 130 mm; (2nd and 3rd spindles) 7.5 kW 4) Top horizontal, 220 mm, 7.5 kW - 4th spindle with electric height adjustment (up/down) - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - 4 driven, toothed infeed rollers from above - 1 driven, rubber-coated outfeed roller from above - 1 driven, rubber-coated outfeed roller from below - Feed on Cardan shafts - Infinitely variable feed speed adjustment - Feed motor: 1.5 kW - Lifting (height adjustment) motor: 0.75 kW - Electric planing thickness adjustment - Infeed table length: 1960 mm - Central lubrication - Extraction port diameter: 3×120 mm, 1×140 mm Gusdpfx Agox Sxxvsfoa - Fully enclosed in cabin - Dimensions (L/W/H): 3430 × 1500 × 1430 mm - Weight: approx. 1,500 kg – For 4 heads – German made – Unpainted – Used planer, very good condition Net price: 30,900 PLN Net price: 7,360 EUR (based on exchange rate 4.2 EUR/PLN) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg Gsdpsyk E Rhefx Agfsua ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 92552, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, planing height: 120 mm, power of feed motor: 1,500 W, working height: 120 mm, 🪚 2001 Weinig Quattromat 23P Planer Moulder – Industrial Performance in Very Good Condition Gedpfjwnr Ensx Agfoua Now available for sale: a 2001 Weinig Quattromat 23P, one of the industry’s most reliable and compact 4-sided planing and moulding machines, ideal for workshops producing mouldings, profiles, cladding, architraves, and more. This unit is in very good condition, fully operational, and perfect for businesses looking to increase productivity with a trusted European-built planer moulder. ✅ Key Features – Weinig Quattromat 23P Year of Manufacture: 2001 Condition: Very Good – well-maintained, and ready to run Working Width: 13 to 230 mm Working Height: 6 to 120 mm Number of Spindles: 4 Spindle Diameter: 40 mm Spindle Speed: 6,000 rpm Feed Speed: Variable up to 20 m/min Power: Approx. 21 kW combined spindle power Infeed Table: 1,800 mm Pneumatic Pressure System: For consistent timber hold-down Digital Readouts: For quick and accurate spindle positioning Straightening spindle motor: 4 - 7.5 KW (5.5 - 10 HP) Vertical spindles motor: 5.5 - 11 KW (7.5 - 15 HP) Top spindle motor: 4 - 11 KW (5.5 - 15 HP) Feed motor: 1.5 KW (2 HP) Spindle speed: 6,000 rpm Spindle diameter: 40 mm Tool cutting circles of moulding spindles: 125 - 200 mm Adjustment range of spindles (axial): 30 mm Adjustment range of straightening spindle: 5 mm Feed speed: 8 m/min. Feed roller diameter: 140 mm Feed roller width: 2 x 50 mm Width of roller in the outfeed table: 50 mm Adjustment range of straightening table and edge-jointing fence: 10 mm Height of right fences: 60 mm Length of straightening table: 2 m Reference engraver with cutter: Yes Pneumatic pressure for feed rollers: Yes Pneumatic adjustment of infeed roller in front of 1st bottom spindle: Yes Pressure roller from above and left in front of machine infeed: Yes 🛠️ Machine Capabilities 4-sided planing for smooth and dimensionally accurate timber Profile moulding (e.g. tongue & groove, chamfering, rebating, etc.) Batch production of window, door, or cladding components Compact footprint – ideal for smaller workshops or mobile production lines Easy spindle access and minimal setup time 📦 Included with Machine Weinig Quattromat 23P base unit Dust extraction ports Original manuals and operator instructions Fully tested, serviced, and ready for production 🪵 Perfect For: Joinery workshops Timber frame manufacturers Furniture makers Shed and fencing producers Custom millwork and architectural moulding shops 📍 Availability & Delivery The machine is in stock now and available for immediate inspection and dispatch. We offer delivery across Ireland, UK and Europe. 📞 Contact Us Today Boost your timber processing capabilities with this robust and accurate Weinig Quattromat 23P. Weinig Quattromat 23P for sale Used Weinig planer moulder in very good condition 4-side planer moulder woodworking machine Industrial wood planer for moulding production Compact planer moulder for small workshops Weinig planing and profiling machine UK / Ireland / Europe Second-hand Weinig machinery for woodworking Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), functionality: fully functional, Weinig Unimat 1000 Star four-sided planer Gusdpjvcbr Ijfx Agfja Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Top 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width adjustment Automatic tabletop lubrication pump Powered rollers in worktop (1 grooved roller for wet wood) Push speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL Gujdpjypvdisfx Agfsa With side pusher and waste gate 5. Outfeed transport belt

Condition: excellent (used), Year of construction: 2011, CNC Profiling Center Weinig Conturex 2 for milling, drilling, and sawing in cross and longitudinal machining Type C 124 Year of manufacture: 2011 Very good condition Oertli tool set Working width: 40–260 mm Working height: 25–150 mm PowerGrip clamping table, table support length: 2 x 2280 mm Workpiece length without repositioning cycle: 220–2700 mm Workpiece length with repositioning cycle: 2700–4500 mm Guedpfeypb Adjx Agfja Workpiece length with multiple repositioning cycles: 4500–6000 mm

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit Gsdpfx Agoxtvgkjfsua ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm ----- Price of The above-men...

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Guedpfx Agsyi Dw Dsfea Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch

Condition: excellent (used), Year of construction: 1992, beautiful machine in good condition as it came from a small business with little use. with IV 68 tool is still in operation ready for demonstration Gedpfx Asu S Afcjgfoua

Condition: used, functionality: fully functional, working width: 240 mm, shaft diameter: 38 mm, Spindle from Weinig Powermat 400. Gsdpfeu D Nihex Agfsua Price per piece

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW Gsdpfx Ageufcnqofsua

Condition: excellent (used), Number of boring spindles 6 St. Working width 220 mm Working height 120 mm Length of the planing table 2.000 mm Feed motor 5,5 kW Guedpfeyiu R Isx Agfoa Feed speed 36 m/min. Grooved table Ja Ja

Year of construction: 2026, condition: new, functionality: fully functional, VH 3 Technical Data - Lifting arms with 3 joints, length 2140 mm (optional: 2500 mm). Pneumatic height adjustment, 6 bar compressed air connection. Lifting speed: 2 cm/sec. Max. tool weight, vertical: 50 kg. Max. tool weight, horizontal: 100 kg. WJS Tool Lifter • Improve your working conditions and protect your back. • No more heavy lifting or unnatural working postures during tool changes! • The ergonomic tool lifting device from WJS makes tool changes on planing machines significantly easier. • It doesn't matter if you want to change tools on the horizontal or vertical spindle. • The lifting device protects not only the operator but also the tool and spindle. • Tool changes become faster, saving your company costs and increasing productivity. • Whereas previously two people had to lift heavy loads, now one person can easily move the large tool weight. Ex works price. Delivery time: 10–12 weeks. 1 unit available from stock, subject to prior sale. Gjdpfx Aoym Rygegfoua

Condition: excellent (used), WEINIG OptiControl 970 PowerLock Guedsyibf Nspfx Agfoa Minimum tool diameter: 90 mm Maximum tool diameter: 300 mm Tool length: 0 – 240 mm Measuring range for radius: 150 mm Contactless measurement of tool dimensions: radius (R) and height (H), displayed on electronic digital displays

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 113253, functionality: fully functional, overall weight: 14,000 kg, table length: 4,500 mm, working width: 260 mm, working height: 150 mm, working length: 4,500 mm, The submission of a bid obligates the buyer to dismantle the machine between April 1, 2026, and April 3, 2026. TECHNICAL DETAILS Working area X-axis: 4,500 mm Working area Y-axis: 260 mm Working area Z-axis: 150 mm Table length: 4,500 mm Number of milling spindles: 1 unit Tool changer positions: 24 units MACHINE DETAILS Godjyh Uxyjpfx Agfsua Power consumption: 63 A Fusing: 80 A Power output: 32.0 kW Voltage: 400 V Total height: 2,900 mm Weight: 14,000 kg EQUIPMENT Electrical diagrams (NL, DE, hardcopy) Spare parts list (NL, DE, hardcopy) User manual (NL, DE, hardcopy) Boring tool Note: The machine is sold without tools.

Condition: new, Bore: 40 mm Cutting circle (ø): 160 mm Designation: MEC Length: 17 mm Material: steel Gsdpfx Asxvy Abegfoua Knife: WP Z2 V2

Condition: used, Width: 1,550 mm Height: 1,100 mm Length: 1,150 mm Protective cover / lid / flap for a planer machine Weinig type Unimat 23 SP or similar. Gjdpfxswuub Se Agfjua

Condition: used, Clamping length: 310 mm Godpfx Agowcn Hqefsua Spindle: 40 & 50 mm Tool diameter range: 80 – 300 mm Weinig precision setting gauge for adjusting planer heads.

Condition: new, Diameter: 150 mm Manufacturer No.: 920 072 005 Grit: D 126 Godpfovl Hy Ajx Agfjua 900819 Grinding wheel for Weinig Rondamat or similar sharpening machines.