Tool grinder, grinding machine

Weinig Rondamat 934

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Nodpfxou Damdo Alnocu

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW Nsdpfswvqkljx Alnocu • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: excellent (used), functionality: fully functional, Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Nsdpfoumxqrox Alnecu Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm Njdpfxswvql Ns Alnocu • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 30 mm x-travel 850 mm y-travel 435 mm Control HEIDENHAIN TNC 150 total power requirement 16 kW weight of the machine ca. 3500 kg dimensions of the machine ca. m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _____ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Nedpst Hxa Hsfx Alnscu Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Technical data: Max planing width: 630 mm Ncjdpfxjxz Dlks Alneu Max planing height: 300 mm Cutterhead diameter: 120 mm Number of knives: 4 Number of feed rollers in the table: Feed speed: 5/8/12/18 m/min Electric height adjustment Extraction port: 150 mm Power supply: 400 V Motor power: 7 kW Overall dimensions: Length: 1280 mm Width: 630 mm Height: 1200 mm

Condition: used, No. 3205 Copy router Reichenbacher RMF Used Ncjdpev Hdg Nofx Alneu For copying, enlarging or reducing a model (wooden figure) Creates a wooden blank (wooden figure) in the desired size Clamping length max. 1000 mm The machine requires a base area of approx. 2500 x 2500 mm LW Sale on behalf of customer, from location near 95485 Warmensteinach, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Ncodpfx Aox A Tk Eslneu Max. panel length: 4300 mm Main saw blade projection: 75 mm No of Grippers: 9

Year of construction: 2007, condition: ready for operation (used), Barberan machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details. • Base Frame: One-piece electro-welded steel frame with high structural rigidity. It is designed to absorb vibrations and maintain pressure roller alignment. • Transport System: Motorized rubber-coated feed wheels with speed controlled via inverter, ensuring precise synchronization between glue application and profile feed. • Pressing / Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot die extrusion system with adjustable lips. • Working Width: 330 mm. • Glue Application Accuracy: Constant gram-per-square-meter distribution, independent from line speed. Closed system reduces oxidation, prevents premature PUR crosslinking, and minimizes material waste. • Adjustment: Micrometric lip adjustment for precise control of glue film thickness. • Type: 20 kg PUR drum melter with heated platen, where only the top layer is melted to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with dedicated seals to prevent air/moisture ingress. • Pump: Integrated gear pump providing constant, pulsation-free adhesive flow to application head. • Function: Maintains adhesive working temperature between approximately 120–150 °C during transfer from melter to slot die head. Ncodpfxoym U Dio Alnju • Length: 4.5 meters. • Technical Features: Internal core made of PTFE (Teflon), high pressure, and PUR-resistant. It includes a uniform electric heating element to prevent cold spots, high-efficiency thermal insulation, an integrated thermocouple, and temperature control via machine PLC.

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Nodpfx Asxz Hh Uslnocu Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...