Used Weinig Hydromat 23 for sale (544)

Condition: used, Year of construction: 1996, Weinig Hydromat 23 Technical data Hnedpfxjqrt Eke Aanjr Working width 30 - 230 mm Working height 19 - 200 mm Spindle down, right, left, up, down u- re-li-o-u.o without infeed machine only Machine is dismantled, immediately available Transport can be organized

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY Hodpfozd Tavox Aansnr RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Hsdpeyl Rmqefx Aansnr Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  11kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: used, Year of construction: 1996, Hi Mateusz, Please list the machine described below for sale. Machine description: High-performance Weinig Hydromat 23 planer Weinig Hydromat 23 planer-moulder for four-sided planing and shaping of wood. Original machine specifications, technical modifications reserved. - Spindles: 8 Spindle arrangement: 1. Bottom spindle // diameter min 125 mm max 160 mm // 7.5-18.5 kW Hnodpfezf Ur Ajx Aanor 1. Right spindle // diameter min 125 mm max 160 mm // 5.5-15 kW 1. Left spindle // diameter min 125 mm max 160 mm // 5.5-15 kW 2. Right spindle // diameter min 125 mm max 160 mm // 5.5-15 kW 1. Top spindle // diameter min 125 mm max 160 mm // 7.5-37 kW 2. Bottom spindle // diameter min 125 mm max 160 mm // 7.5-37 kW 2. Top spindle // diameter min 125 mm max 160 mm // 7.5-37 kW 3. Bottom spindle // diameter min 125 mm max 160 mm // 7.5-37 kW

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Hnedpfowvqklex Aanor Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: good (used), Year of construction: 1997, Four-side planer Weinig Hydromat 23 8 spindles, Machine Number : 023 - 2998 Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, InFeed: Separat hydraulic station ( 15 Kw ) Spindle arrangement: Profiled driven steel roller, before first spindle 1-Bottom (22 kW) (2 x profiled driven steel roller between 1. and 2. spindle) 2-Bottum (7.5 kW) 3-Right (7.5 kW) 4-Left (11 kW) ( 1 x driven steel roller between 4. and 5. spindle ) 5-Top (26 kW) 6-Bottom (37 kW) ( 1 driven steel roller between 6. and 7. spindle ) 7-Bottum (7.5 kW) 8-Top (11 kW) ( 1 x Driven steel roller after 8. spindle ) All 8 spindles mounted with tools Hard coated table Total number of driven roller in the table : 7 Pc. Total Kw : 136 Hedpfx Asy Iwrtjanonr 2 Euro pallets with extra infeed rollers/spareparts/tools included. Separat electric cabinet Separat control cabinet with digital inverter

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm 3 feed rollers in the work table Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Pneumatic pressure rollers Technical documentation Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg Hjdpfxsx Hzv Tj Aanjnr

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Hnodpfxjxlcufs Aanor Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 170mm 6 spindles: 1) horizontal lower 230mm 5.5kW 2) vertical right 170mm 3) vertical left 170mm (spindles 2 and 3) 11kW 4) horizontal upper 230mm 11kW 5) horizontal upper 230mm 7.5kW 6) horizontal lower 230mm 11kW Hnsdey N Ahijpfx Aaner - all spindles adjustable up/down, right/left - spindles 4 and 5 with electric up/down adjustment - spindle speed 8000 rpm - spindle diameter 40mm - all spindles equipped with an electric brake - 6 top feed rollers, pulling, toothed, including 1 double roller - top discharge roller, pulling, rubber, double - bottom discharge roller, pulling, rubber, double - side pressure - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment 6-24m/min - feed motor 4kW - electric adjustment of planing thickness - body lifting motor 0.55kW - central lubrication of the table - diameter of extraction nozzles 6x140mm - dimensions (L/W/H) 4900x2400x2000mm - weight approximately 4000kg ADVANTAGES – German production, WEINIG brand – with 6 heads – unpainted – used planer, very good condition Original photos Net price: 122900 PLN Net price: 2926 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Hnsdpfx Aozu Awrsanor Feed speed 30-300 m/min Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing

Condition: used, Year of construction: 1998, Four-sided planing machine Manufacturer: Weinig Type: P 23 E Year of manufacture: 1998 Technical data - Working width: 230 mm - Working height: 8-120 mm - Number of spindles: 5 (top, right, left, bottom, top) - Spindle speed: 6000 rpm - Feed rate: 5-24 m/min - Total connected power: approx. 25 kW Hsdpfxezuzfuo Aanonr - Infeed table: approx. 2000 mm - Weight: approx. 2500 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, Used 4-sided planing machine Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Technical data: 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Nominal pressure 8 bar Hjdozuzdqjpfx Aanenr Operating pressure 6 bar Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 123-2001, functionality: fully functional, planing width: 260 mm, rotational speed (max.): 6,000 rpm, number of spindles: 5, planing height: 120 mm, roller diameter: 140 mm, TECHNICAL DETAILS Maximum planing width: 260 mm Maximum planing height: 120 mm Infeed table length: 2,470 mm Number of spindles: 5 Spindle 1 Spindle type: Horizontal spindle Motor power: 5.5 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 150 mm Spindle 2 Spindle type: Vertical spindle Motor power: 11 kW Spindle diameter: 140 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 3 Spindle type: Vertical spindle Motor power: 11 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 5 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 140 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Feed and extraction Diameter of feed rollers: 140 mm Feed motor: 2.2 kW Diameter of extraction nozzle: 140 mm Feed drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Hjdpjzuwrkofx Aanonr Electrical data Voltage: 380 V Current draw: 84 A Fuses: 100 A Total power: 39 kW Dimensions & Weight Dimensions (L × W × H): 4,000 × 1,700 × 1,650 mm Dry weight: 2,500 kg Shipping packages: 1 EQUIPMENT Tools for all spindles included Documentation

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting Hnedpfxjzulvwe Aaner - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Hjdpfx Aasu Damdjnonr

Year of construction: 1987, condition: ready for operation (used), A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible. Hnjdpjv T Apcsfx Aansr

Condition: used, Weinig Unimat 23E automatic planing and moulding machine for four-sided planing and profiling of timber, featuring a grooved bed for short and curved workpieces and a long dressing table. Short-piece package Grooved bed Mobile spindle Technical data: - Spindles: 6 - Spindle 1: Bottom / 50 mm / 5.5 kW - Spindle 2: Right / 50 mm / 11 kW - Spindle 3: Left / 50 mm / Shared motor with spindle 2 - Spindle 4: Top / 50 mm / 5.5 kW - Spindle 5: Top / 50 mm / 5.5 kW - Spindle 6: Bottom / 50 mm / 5.5 kW Hodpfezrx Emex Aanjnr - Working width: 230 mm - Working height: 160 mm - Planing table length: 2,500 mm - Feed: 5.5 kW - Axial stroke of vertical spindles: 80 mm - Axial stroke of horizontal spindles: 45 mm

Condition: used, Weinig Profimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, with a long dressing table. Technical data: - Spindle 1: Bottom / 4 kW / 40 mm - Spindle 2: Right / 5.5 kW / 40 mm - Spindle 3: Left / shared motor with #2 / 40 mm - Spindle 4: Top / 5.5 kW / 40 mm - Spindle 5: Bottom / 5.5 kW / 40 mm - Spindles: 5 Hsdpfxozrx Dps Aanonr - Working width: 230 mm - Working height: 120 mm - Feed: 2.2 kW - Planing table length: 2,500 mm

Condition: used, Weinig Unimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, featuring five driven rollers in the table and a universal spindle. Hnedezrx Diopfx Aanjr Technical data: - Spindles: 7 - Spindle 1: Bottom / 5.5 kW / 40 mm - Spindle 2: Right / 5.5 kW / 40 mm - Spindle 3: Left / 11 kW / 40 mm - Spindle 4: Right / 7.5 kW / 40 mm - Spindle 5: Top / 11 kW / 40 mm - Spindle 6: Bottom / 5.5 kW / 40 mm - Spindle 7: Universal / 5.5 kW / 40 mm - Working width: 230 mm - Working height: 160 mm

Condition: used, Weinig Profimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, including a set of planing heads. Technical data: - Spindles: 5 - Spindle 1: Bottom - Spindle 2: Right - Spindle 3: Left - Spindle 4: Top - Spindle 5: Bottom - Working width: 230 mm Hedpfszrx Axjx Aansnr - Working height: 120 mm

Condition: used, Weinig Unimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, featuring the ATS system and reinforced Technical data: - Spindles: 6 - Spindle 1: Bottom / 40 mm / 7.5 kW / 8,000 rpm - Spindle 2: Right / 40 mm / 7.5 kW / 8,000 rpm - Spindle 3: Left / 40 mm / 7.5 kW / 8,000 rpm - Spindle 4: Top / 40 mm / 7.5 kW / 8,000 rpm - Spindle 5: Bottom / 40 mm / 7.5 kW / 8,000 rpm - Spindle 6: Universal / 40 mm / 7.5 kW / 6,000 rpm - Working width: 230 mm - Working height: 160 mm - Powered table roller: 1 - Feed rate: 24 m/min - Feed motor: 4 kW - Dressing table length: 2,500 mm Hnodpfx Aszrx Afjaner

Condition: used, Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Technical data: - Optional: Conversion to a conventional smooth table, on request. - Spindles: 5 - Spindle 1: Bottom / 40 mm / 5.5 kW - Spindle 2: Right / 40 mm / 7.5 kW - Spindle 3: Left / 40 mm / Shared motor with spindle 2 - Spindle 4: Top / 40 mm / 7.5 kW - Spindle 5: Bottom / 40 mm / 5.5 kW - Working width: 230 mm Hnsdpjzrxzhsfx Aanor - Working height: 160 mm - Feed: 4 kW / 5–24 m/min

Condition: used, Weinig Unimat 23 SP automatic planing and splitting machine for the precise planing (or pre-planing) and splitting of solid timber in a single operation. The machine delivers a high standard of finish and is ideal for efficient mass production in the timber industry. Technical data: Hnodpfx Aaezrxywenor - Spindles: 4 - Working width: 230 mm - Working height: 120 mm - Spindle 1: Bottom (5.5 kW) - Spindle 2: Top (5.5 kW) - Spindle 3: Right (11 kW) - Spindle 4: Left (11 kW) - Feed: 5.5 kW

Condition: used, Weinig Profimat 23 automatic planing and moulding machine for four-sided planing and profiling with the ATS system. Technical data: - Spindles: 6 - Spindle 1: Bottom - Spindle 2: Right - Spindle 3: Left - Spindle 4: Right - Spindle 5: Top Hnsdpfx Aaozrxyqjner - Spindle 6: Bottom - Working width: 230 mm - Working height: 120 mm - Planing table length: 2,000 mm - Control system: ATS

Condition: used, Weinig H25 high-speed automatic planing and moulding machine for four-sided planing and profiling of wet timber (freshly sawn) The photographs show the machine’s current condition. Among other things, a number of original new Weinig parts have been fitted, and the tables and stops have been sanded down and recoated. Further new parts are required to complete the machine. These will be ordered upon receipt of an order, taking the customer’s requirements into account. The control panel is for testing purposes only and is temporary. Hjdpfx Aszrxykjanjnr Technical data: - Spindles: 5 - Working width: 250 mm - Working height: 160 mm - Spindle 1: Bottom (7.5 kW) - Spindle 2: Right (11 kW) - Spindle 3: Left (11 kW) - Spindle 4: Top (15 kW) - Spindle 5: Bottom (tba) - Hydraulic feed: 15 kW - Powered table rollers: Yes - Table tops: Resanded and recoated (hardened)