Planer and moulder

WEINIG Hydromat H25R

Condition: excellent (used), Planing width 250 mm Planing height 120 mm 1. lower spindle 2. right spindle 3. left spindle 4. right spindle 5. upper spindle 6. lower spindle 7. lower spindle Bedpfxswlk E Ie Anmolk 8. Universal spindle 360* - Hydraulic feed 6-60 m/min. - 10x driven table rollers - Spindle diameter 50 mm

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads Bjdsrigxyjpfx Anmjlk electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Bledpfxehuthyj Anmek Max. planing width: 600 mm Max. planing height: 280 mm Planer shafts with strip knives Ready for immediate use.

Condition: refurbished (used), Year of construction: 2010, operating hours: 34,616 h, functionality: fully functional, machine/vehicle number: 1244801, overall weight: 13,500 kg, rotor diameter: 500 mm, number of blades: 125, rotor length: 1,800 mm, type of input current: AC, sieve perforation: 30 mm, VECOPLAN Type VAZ 1800F shredder, after complete renovation, ready to work. The machine is fully functional, the following parts have been replaced: cutting system (knife bases, knives, counter knives, rotor surfacing), vibration isolators, sliding strips, sieve, oils in gears, electrical, hydraulic and pneumatic installations. Bledpfx Ansvx Rtaomsk

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm Bodpfeh Nvyzsx Anmjlk -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. Bedpsw Av Ivofx Anmelk We currently have two demonstration machines in stock.

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h Bodpfxjylmmmj Anmolk • Noise level (idling): ≤ 85 dBA

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: Bedpsw I R Rnjfx Anmelk - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Valon Kone VK26M With infeed and outfeed conveyors. Blsdevgtz Njpfx Anmok

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Bledpfsu Agh Sjx Anmsk Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location