Used Weinig High Mech for sale (474)

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm – 4 spindles: 1) Horizontal bottom, 220 mm, 5.5 kW 2) Vertical right, 130 mm 3) Vertical left, 130 mm; (spindles 2 and 3) 5.5 kW 4) Horizontal top, 220 mm, 5.5 kW - 4 electrically adjustable spindles (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed drive rollers, gear-driven, including 1 double roller - 1 double upper outfeed drive roller, rubber-coated - Lower outfeed drive roller, rubber-coated - Feed via Cardan shaft rollers - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm - Weight: 1700 kg – German-made – Unpainted – Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Net price calculated at exchange rate of 4.2 PLN/EUR Nwedpjlikzfefx Ad Ajp (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit Njdomgc I Nopfx Ad Aowp - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: good (used), Feed speed 10-40 m/min Distance: roller fence to sawline 230 mm Distance: feed rollers to sawline 159mm Distance between saws 5mm to 180mm Saw blade dimensions 6050 x 100 x 1.06 mm to max 1,24mm Saw blade speed 35 m/sec Saw wheel diameter 915 mm Nedpfxexhfx Sj Ad Ajwp Saw motor power 2 x 15 kW Feed motor power 1,1 kW with inverter. Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 6000 kg

Condition: excellent (used), Weinig LTB250/3500G belt lifter Nwedpfou Eclrsx Ad Aop Length 3500mm Width 250mm Speed 22m/min

Condition: used, Year of construction: 1962, Used machine Nedpfx Adsw Sbbro Aewp Year of manufacture: 1962 Equipment and technical data: Planing width: 630 mm Working height: 250 mm Table length: 1100 mm Extraction nozzle: 160 mm Knives: 4 strip planing knives The machine does not have a motor brake! Location: Flörsheim Availability: short notice

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Nsdpfx Ajxtxi Ijd Ajwp Motor power 7,5kW Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Four-side planer WEINIG Quattromat 18 -used- Reversible knife system, Lubricant pump, Dust tested ----- Technical specifications ----- Planing width: 180 mm, Planing height: 120 mm, Number of spindles: 4, Feed speed: 8 m/min, Extraction port Ø: 4x 120 mm, Dimensions (LxWxH): 3,050x1,000x1,500 mm, Weight: 1,200 kg Nsdpfxoxqd Ahe Ad Aewp

Condition: excellent (used), functionality: fully functional, Heavy-duty Raimann multi-blade saw. Chain bed width 500 mm. Usable clamping length of saw sleeves 570 mm Cutting height 120 mm. Powered top rollers. Njdpfxsxtwvts Ad Aowp Electric pressure beam adjustment. Spiked chain. Counter bearing. Stepless hydraulic feed from 0 - 50 m/min. Drive motor 75 kW with pneumatic tensioning station. 2 saw sleeves. Safety devices. Electrical control cabinet. Etc. Some new parts installed.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, length stop: 4,500 mm, tool diameter: 400 mm, spindle speed (max.): 6,000 rpm, controller model: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontally adjustable, infinitely variable) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment: 150 mm NC axis, electronically infinitely variable Radial adjustment: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal bottom Axial adjustment: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and slotting spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter-bearing Axial adjustment: 580 mm NC axis, infinitely variable Tailstock counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter-bearing Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment: 30 mm NC axis, infinitely variable Radial adjustment: 125 mm NC axis, infinitely variable Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter-bearing Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (hardware spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment: 115 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertical right, operating from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment: 100 mm, 8 positions via pneumatic turret Radial adjustment: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Nwedpfoxp U N Njx Ad Aep Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment: 100 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 wood and wood-aluminium Additional features can be found in the attached document! Note: The machine has already been properly dismantled.

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. Nsdpfx Asxtwm Ejd Aowp A3 Outfeed Drop leaf. Crossfeed belt conveyor. Scissors lift with pack chains. pack outfeed chains.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Working height 40-120mm Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented Njdpfx Adoumci Sj Aswp 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Nodpfsxtxg Hjx Ad Ajwp Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm Nsdpeq Nnpfefx Ad Aewp - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: used, Year of construction: 2014, Weinig Powermat 600 planer and moulder for four-sided planing and profiling of wood. spindles: 5 Construction year: 2014 working width: 230 mm working height: 160 mm Njdsxpvdzepfx Ad Aswp spindle 1: Bottom // 7.5 kW // 40 mm spindle 2: Right // 11 kW // 40 mm spindle 3: Left // according to motor with spindle 2 // 40 mm spindle 4: Top // 7.5 kW // 40 mm spindle 5: Bottom // 5.5 kW // 40 mm

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt Njdpextwmrofx Ad Ajwp 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: like new (used), functionality: fully functional, Hydraulic feed to the Weinig Hydromat. Nwodpfxjv Er Ufe Ad Asp Feed speed 8-60m/min

Year of construction: 1998, condition: excellent (used), I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Nwjdpsfzzhyjfx Ad Ajp Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: excellent (used), CATALOG NUMBER 7133 TECHNICAL SPECIFICATIONS - max. working width: 220 mm - max. working height: 120 mm – 5 spindles: 1) bottom horizontal – 220 mm, 5.5 kW 2) right vertical – 120 mm 3) left vertical – 120 mm; spindles 2 and 3, 11 kW each 4) top horizontal – 220 mm, 11 kW 5) bottom horizontal – 220 mm, 5.5 kW - all spindles adjustable up/down, left/right - spindle diameter: 40 mm - pneumatic pressure rollers - 4 driven, gear-feed rollers from above, including 2 double Nedpopmr T Ajfx Ad Ajwp - 1 double outfeed roller from above, smooth, rubber-coated - 1 outfeed roller from below, rubber-coated - feed via Cardan shafts - adjustable feed speed - feed motor: 2.2 kW - lifting motor: 0.25 kW - electric thickness adjustment - infeed table length: 1970 mm - central lubrication - extraction port diameter: 4x120 mm, 1x140 mm - dimensions (LxWxH): 3500x1550x1400 mm - weight: 1750 kg ADVANTAGES – with 5 cutter heads – German-made – original paint (not repainted) – used planer, in very good condition Net price: 48,900 PLN Net price: 11,640 EUR (depending on 1 EUR = 4.2 PLN) (Prices may change based on currency fluctuations)

Condition: used, Weinig Powermat 700 planer and moulder with CNC control for four-sided planing and profiling of wood. Available by arrangement from March 2026. Sale of this machine is subject to the sale of the briquetting press (Ref. No. 800055) or the entire planing unit (Ref. No. 100101). spindle: 6 spindle 1: Bottom / 7.5 kW / 6,000 rpm spindle 2: Right / 15 kW / 8,000 rpm spindle 3: Left / Common motor with #2 / 8,000 rpm spindle 4: Top / 11 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm spindle 6: Bottom / 7.5 kW / 8,000 rpm Nsdpfsxpuufox Ad Aowp working width: 230 mm working height: 160 mm spindle diameter: 40 mm feed: 40 m/min / 5 kW Planer table length: 1.200 mm Control: Memory Plus

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) CNC position adjustment. 4798 work hours Nwodpjxtwmfofx Ad Asp Machine number 114015 (2010) 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Bottom 7.5 kW Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Universal 7.5 kW 5,2kW feed motor 30m/min feed speed. 2m infeeed table. CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Weinig 811, Nwodpfx Adjv Skaye Aep Weinig 820, Weinig 814, Weinig 811, Weinig 806

Condition: good (used), Weinig Hydromat H23 8 spindle Nwodpfoxtwl Uex Ad Aop 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: used, functionality: fully functional, spindle diameter: 40 mm, Spindle for thickness planer Nodpjt Uvz Rsfx Ad Aewp

Condition: excellent (used), Year of construction: 2003, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Automatic lubrication system for bedplates Maximum dimensions 140mm x 230mm No 1.  11kw - Bottom 6000rpm + Outboard bearing - straight jointer prepared Nwjdoxtwl Ispfx Ad Ajp No 2. 11kw - Right 6000rpm - straight and profile jointer prepared No 3. 11kw - Left 6000rpm - straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing - jointer prepared No 5 . 11kw - Top 6000rpm + Outboard bearing - straight jointer No 6 . 18.5kw - Bottom 6000rpm + Outboard bearing - straight jointer 7.5 kw feed. 6-60m/min (Possible to increase speed as needed). 50mm spindles Beam 0.55kW Full documentation included. Possible to supply with hydro tooling if needed. Possible to supply with infeed and outfeed if needed.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Nsdpfxextwlze Ad Aswp Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)