Used Weinig Profimat 23 E for sale (473)

Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, shaft diameter: 40 mm, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion in the table Dcodpfx Ajyc Nubsc Njc One powered roller in the table at the outfeed. Comes with tooling.

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm Max. tool Ø 200 mm 5 shafts ATS control Composition : Lower planer 5.5 kW, bore 40 mm Right-hand spindle moulder 5.5 kW, 40 mm bore Left-hand spindle moulder 5.5 kW, 40 mm bore Top planer 5.5 kW, 40 mm bore Lower planer 5.5 kW, 40 mm bore Feeding speed : 5-35 m/min Infeed table length : 2000 mm Roller in table Pneumatic pressure Automatic table lubrication Power and Motors Voltage: 380 V Dedpfxoqxm S So Ac Nscc Pluging: Three-phased Overall dimensions

Condition: excellent (used), Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Top 7.5kw Dcjdpfx Aeumxqroc Nsc Top 5.5kw Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top Dodpfexpn T Ujx Ac Necc > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2002, Weinig four-sided planer max. planing width 230mm max. planing height 120mm Digital positioning 5 stations + 1 output unit for rounding or chamfering Total power 43kw 380V Dcsdjxg Nbuspfx Ac Nec

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal Dsdpou Su Huofx Ac Nocc > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2000, machine/vehicle number: 90816, Technical specifications: 1st shaft: lower horizontal, 2nd shaft: right spindle moulder, 3rd shaft: left spindle moulder, 4th shaft: upper horizontal, 5th shaft: lower horizontal, 6th shaft: universal, ATS control, any width, maximum width: 230, maximum height: 120. Djdpfxexp U R Ho Ac Nocc

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm Dcsdperigxyjfx Ac Njc 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: used, Year of construction: 2002, SECOND-HAND 5+1 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 FORTEC - CE RULES - ATS device - 1st horizontal botom - 2nd vertical right - 3rd vertical left - 4th horizontal top - 5th horizontal bottom - 6th universal Djdpswrx Nbefx Ac Nocc - Working width mm. 230 - Cardan feed - Year 2002

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom spindles diameter 40mm variable regulated feeder feeder with cardan pneumatic pressure of feeding rolls table lubrication Dcjdpfew Afblex Ac Nsc

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric planing thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES – German-made, WEINIG brand Dcsdpfxox Syq Ts Ac Noc – With 6 heads – Not repainted – Used planer, very good condition Original pictures Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Working width: 230 mm Working height: 120 mm Dodpfx Acsx Ecgue Nocc Spindles: 5 Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / common motor with #2 / 40 mm Spindle 4: Top / 7.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Weinig Profimat 23 E four-sided planer and moulder for planing and profiling timber on all four sides, equipped with mobile spindle.

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW Dcodpfx Aeibq Nijc Njc 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: used, Year of construction: 1997, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT P23E - CE RULES - Horizontal bottom 5.5Kw - Vertical right/left 7.5Kw Djdpfx Aowrxuwoc Nscc - Horizontal top 7.5Kw - Horizontal bottom 4Kw - Year 1997 (CE)

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 226-60758, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Feed motor: 2.2 kW Feed speed: 5–24 m/min Total power requirement: 25 kW Dimensions (Length/Width/Height): 3400 x 1800 x 1610 mm Machine weight: approx. 2500 kg Four-Side Planer WEINIG PROFIMAT 23 E - Year of manufacture: 1997 - Serial number: 226-60758 Dcjdpfxew Svb Te Ac Nec - Maximum working width: 230 mm - Maximum working height: 120 mm - Cardan shaft feed, stepless adjustment 5–24 m/min - Feed motor: 2.2 kW - 1st spindle (bottom): 4.0 kW - 2nd spindle (right) – motor for 2nd right and 3rd left spindle: 7.5 kW - 3rd spindle (left) - 4th spindle (top), motor: 5.5 kW - 5th spindle (bottom), motor: 4.0 kW - Electrically adjustable height and depth: 0.25 kW - All spindles equipped with brake motors - Spindle speed: 6,000 rpm - Spindle diameter: ø 40 mm - Planing table: 2,000 mm with serrated table inserts and straightening guide - Feed rollers with pneumatic pressure - Feed roller diameter: 140 mm - Transport rollers opposite left spindle - Infeed roller before jointer with pneumatic actuation - SICO counters - Manual wax pump - Centralized lubrication points - 1 set of planing heads - Total connected load: 25 kW - Machine dimensions: L=3400 mm, W=1800 mm, H=1610 mm - Weight: 2500 kg

Condition: used, Number of boring spindles 5 St. Dcedexu H R Ajpfx Ac Nec

Condition: used, Planer table length: 2,000 mm Working width: 230 mm Working height: 120 mm Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Right Spindle 5: Top Spindle 6: Bottom Number of spindles: 6 Control: ATS Dcsdpjw I A Sqofx Ac Nec Weinig Profimat 23 planer and moulder for four-sided planing and profiling with ATS system.

Condition: used, Year of construction: 2000, Working width: 230 mm Dodpjwztw Ssfx Ac Nscc Working height: 160 mm Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Number of spindles: 5 Four-sided planer and moulding machine Weinig Unimat 23E for four-side planing and profiling of timber, equipped with a mobile spindle for automatic adjustment and grooved bed (optionally without grooved bed) for short and curved workpieces, as well as a long jointer table. Included: Set of grooved bed cutters Optional: Conversion to conventional smooth table available upon request.

Condition: used, Planer table length: 2,500 mm Working width: 230 mm Working height: 160 mm Axial stroke horizontal spindles: 45 mm Axial stroke vertical spindles: 80 mm Dcodjv Ec Ntspfx Ac Nec Short part package: Yes Grooved bed: Yes Grooved bed cutter: Included Spindle 1: Bottom / 5.5 kW / 50 mm Spindle 2: Right / 11 kW / 50 mm Spindle 3: Left / 11 kW / 50 mm Spindle 4: Top / 5.5 kW / 50 mm Spindle 5: Top / 5.5 kW / 50 mm Spindle 6: Bottom / 5.5 kW / 50 mm Number of spindles: 6 Control: Mobile spindle Feed: 5.5 kW Planing and moulding machine Weinig Unimat 23E for four-sided planing and profiling of timber, equipped with a grooved bed for short and curved workpieces, as well as mobile spindle and long planer table.

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Djdjwwwkhspfx Ac Necc Location: Nattheim

Condition: used, Four-side planer Weinig Profimat 23 Max planing width: 230 mm Max planing height: 120 mm 5 heads Fully adjustable heads 40 mm diameter spindles Feed via cardan shafts with stepless adjustment Dcodpfx Aoygwxcoc Nec Robust planer by WEINIG, Machine inspected and ready for testing

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Working height 120mm Number of spindles 5 Spindle arrangement: Bottom 4kw Right Left 11kw Top 11kw Dedpfx Aovyr Hkec Necc Bottom 11kw Pneumatic material clamps Adjustable feed speed 5-22m/min Entry table length 2470mm Feed motor with a power of 4kw CE certificate Diameter of exhausts 5x140mm Machine dimensions 400x150x165cmH Weight 2300kg

Condition: not inspected (used), Year of construction: 1999, planing width: 230 mm, total height: 120 mm, Four-sided planer / Moulding machine Manufacturer: Weinig Model: Profimat 23 E Year of manufacture: 1999 For four-sided planing and profiling Max. planing width: 230 mm Max. planing height: 120 mm Dcedpfx Acoygcl Io Nec 5 spindles Spindle diameter: 40 mm Spindle arrangement: Bottom, approx. 4 kW Right + Left, approx. 5 kW Top, approx. 4 kW Bottom, approx. 4 kW Connection: 380 V, 50 Hz

Condition: excellent (used), Profimat. Opportunity from a Swiss operation in well-maintained condition, 5 spindles 230/120. 5th spindle below, profiling possible on all spindles. Dcsdpfxsycwkqe Ac Nsc

Condition: used, Working width: 260 mm Working height: 160 mm Spindles: 5 Spindle 1: Bottom / 7.5 kW / 40 mm Spindle 2: Right / 11 kW / 40 mm Spindle 3: Left / shared motor with right / 40 mm Spindle 4: Top / 11 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Feed: 4 kW Dcodpex Ttbnefx Ac Njc Weinig Profimat 23 planing and profiling machine for four-sided planing and profiling of timber in construction grade version, in excellent original condition and incl. planing heads (2 x 270 mm // 2 x 170 mm)