Used Weiler Ud 24 Cnc for sale (180)

Condition: good (used), Year of construction: 1996, Weiler lathe Itsdpsvbwd Refx Affor Type Condor B Center height 165 mm Center width 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle head DIN 55027 size 5 Spindle bore 40 mm Inner taper main spindle MK 5 Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Weight 1040 kg 3 jaw lathe chuck 4 jaw lathe chuck Multifix B Rotating center punch

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Itodevtthispfx Affjr Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Itjdpow I A Uxjfx Affer Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: used, Year of construction: 1999, functionality: fully functional, Weiler Primus VC lathe, year 1999, equipped with a 3-axis Siemens digital readout, 3-jaw chuck, Multifix toolpost, rear splash guard, and electric chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by appointment. Itodpex Afvgofx Affor

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 56 mm, turning length: 1,000 mm, For sale: used Weiler Commodor lathe, year of manufacture approx. 1990. Turning length: 1000mm. Swing over bed: 380mm. Swing over cross slide: 190mm. Spindle bore: 56mm. Spindle speed: 25–2000 rpm. Tailstock: MK4. Equipment: 2-axis digital readout by Heidenhain, 200mm three-jaw chuck, Multifix including 1 toolholder, coolant system, longitudinal and cross feeds, machine feet, various chuck keys, bed stop, live centres, complete documentation. Itodpoxzu Ipsfx Affor

Condition: good (used), WEILER DA 260x1000 Gap Bed & Leadscrew Lathe - 3-axis digital readout (new) - Centre height: 260 mm - Swing over bed: 535 mm - Swing over cross slide: 345 mm - Distance between centres: 1000 mm - Spindle bore: 71 mm - Speed range: 33 - 1500 rpm - Automatic longitudinal and cross feeds - Thread cutting: metric / inch / diametral etc. - Tailstock: MT 4 - Motor power: 7.5 kW - Chuck nut (new) - Multifix toolpost base with insert - 3-jaw chuck: 350 mm - 2x emergency stop - Electric chuck guard (new) - Chip guard (rear) - Coolant system - Drill chuck / live centre - Documentation Itjdpjxyugcofx Affor Dimensions (LxWxH): 2.7 x 1.5 x 1.7 meters / weight: 1700 kg Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Itsdpfxexv A I Tj Affer Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post Itjdpfoxfwckjx Affsr 3 Multifix tool holders Emergency stop device

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 2,100 h, turning diameter over cross slide: 200 mm, spindle bore: 66 mm, turning diameter over bed slide: 435 mm, center height: 217 mm, turning length: 1,000 mm, total length: 3,061 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 1 rpm, bed width: 202 mm, For sale: WEILER E40 Precision Lathe – only 2100 hours on the clock, Machine condition as new. Features a 435 mm swing over bed, 200 mm swing over cross slide, 66 mm spindle bore, and a 1,000 mm turning length. Perfect for workshops needing accuracy and durability. Itodpev A Irzsfx Affsr

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Iodpfx Asuzyw Dsffjtr Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), Cycle Lathe Weiler E 50 / 1D Year of manufacture: 1999 Machine no.: 684 Control: Weiler (Siemens 810D) Power-on hours: 43,543h (Machine was overhauled by Schmeißer a few years ago) Technical specifications: Iedpfx Afewtqnrofotr Spindle speed: 1–625 / 4–2,500 rpm (2 gear stages) Drive power: 17kW torque Spindle torque: 1,200Nm Spindle bore: 66mm Distance between centers: 1,000mm Center height: 280mm Swing diameter over bed: 570mm Swing diameter over cross slide: 340mm Equipment/Accessories: - Interface for external programming - Parat tool holder incl. 6 holders - Operating manual - Coolant system - Various turning tools and drills - Jaws for lathe chuck - Live center - Machine feet The machine has been tested under power and is in perfect, ready-to-use condition. The machine bed is also in good condition. Price: net ex works, loaded on truck from stock.

Condition: good (used), WEILER Praktikant 800 R / Lead and Feed Screw Lathe from Educational Institution - Swing over bed: 300 mm - Swing over cross slide: 150 mm - Turning length: 800 mm Iedpfx Afoxyqxnefstr - Spindle bore: 42 mm - Speed range: 40–2000 rpm - Automatic longitudinal and cross feeds - Threads / Metric / Inch - Tailstock taper: MT 3 - Drive power: 3 kW - Multifix quick-change toolpost with holders - Collet quick-clamping device incl. collets - Chuck guard - Chip guard with work light - Emergency stop - Change gears - Live center + drill chuck - Tool cabinet - Documentation Dimensions: LxWxH: 1.8 x 0.8 x 1.6 meters / Weight: 750 kg Errors and omissions excepted.

Condition: excellent (used), Swing over bed 330 mm Distance between centers 750 mm Spindle speeds 1-4'500 rpm Itsdpfx Asud Naqsffjr Control: WEILER C3 Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : Itedpfx Aou Aftgeffor We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: used, L + Z Lathe WEILER Type Condor 81 A Machine no. No. 36553 Year of construction approx. 1985 Itjdpfx Ajk S Ht Aeffer center distance 750 mm Turning diameter over bed 330 mm Center height over bed 165 mm Turning diameter over support 180 mm Center height above support 90 mm Spindle bore 40 mm Chuck holder short taper DIN 55027 size 5 Tailstock inner taper MK 3 Pinol adjustment 110 mm Spindle speed 45 - 2800 rpm 16 steps Drive power 3 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 16 gear steps - 3-jaw lathe chuck Ø 160 mm RÖHM with with drilling and turning jaws - Multifix size B quick-change steel holder with 3 inserts - Automatic longitudinal and planar feed - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump in the machine base, without supply line to the work area - Folding chuck guard - Splash guard - 1 piece rotating center point - Electrical diagram and operating instructions Space requirement L x W x H 1850 x 950 x 1400 mm weight 1100 kg good condition

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Itjdovtp Edopfx Affsr Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Itedpfx Afertd Uwofor Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: excellent (used), functionality: fully functional, Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8 from training workshop Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 3768 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital display from Easson ES8 Itsdpfsvkfhpox Affsr >> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube >> 1 three-jaw chuck with 2 sets of jaws >> 1 four-jaw chuck with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Bed stop >> Turning device To the machine : We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm Itedevivmyepfx Affor >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable Iedpfexcuazox Affotr >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard Iodpjw Idlljfx Affjtr About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch Ijdpfswrmuxex Affetr >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg Isdpfx Aew Nw Dqeffstr >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 Ijdpjwb Supofx Affotr >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre For Safety: >> Cover for lead and feed screw Iedsxu Hlaspfx Affotr >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.