Used Weiler Matador Vs1 for sale (201)

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR from Bundeswehr stock -Good condition -Good operational condition -Maximum turning height 180mm -Maximum turning length 1000mm -Bar capacity 56 mm -Speed range 56 - 2000 RPM -Automatic longitudinal / facing feeds -Threading / Metric / Inch etc. -Tailstock MK 4 -Three-jaw chuck 250mm -Electric chuck guard -Multifix base and inserts Dodpfx Aiezuhfzoijkw -Coolant system -Chip guard -Machine documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500KG Errors and omissions excepted

Condition: ready for operation (used), L&Z Lathe / WEILER COMMODOR B incl. Heidenhain Digital Readout Djdpfx Aiez Hxm Deiskw -GS designation -3-axis digital Heidenhain control -Year of manufacture 1991 -Center height 180mm -Swinging diameter over bed 330mm -Distance between centers 1000mm -Spindle bore 56mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/crossfeed -Threading / Metric / Inch / Module etc. -Multifix base and inserts -Chuck guard -2 x EMERGENCY STOP -3-jaw chuck -Chip guard -Well-maintained, good overall condition -Machine feet -Documentation Dimensions: 2.5 x 1.3 x 1.7 meters / Weight 1500 kg Errors and omissions excepted

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 -Condition: “Good” -Maximum turning diameter: 165 mm -Swing over bed: 330 mm Dkodpfxozvy T To Aiisw -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm -Automatic longitudinal / cross feeds -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop -Documentation

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Dkodpfezi S Snjx Aiiew Height:4300mm Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Dsdpfx Aijy Ulqwoiekw Accessories and equipment: >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Condition: used, Year of construction: 2001, CNC lathe Manufacturer: Weiler Type: E70 Year of manufacture: 2001 Control: Weiler cycle control D2 Operating hours: 68,950 Distance between centers: 2000 mm Height between centers: 360 mm Max. chuck diameter: 400 mm Max. diameter over bed: 720 mm Max. diameter over cross slide: 430 mm Max. diameter over tool rest: 780 mm Length of tool rest: 160 mm Max. workpiece weight: 3,800 kg Spindle bore: 106 mm Spindle head: Size 11 Quick-change tool holder: Parat 4-position turret Dimensions: 4,030 x 2,443 x 1,900 mm Djdpfx Ajzt S Ttjiiskw Weight: 5,200 kg Available immediately 31126ä

Condition: used, Year of construction: 2000, turning diameter over bed 280 mm turning dia. over face-slide 150 mm centre height 140 mm turning length 500 mm main drive stepless adjustable 0 - 6.000 U/min spindle speed 30 - 5.000 U/min max. workpiece weight between centers 100 kg quill stroke 85 mm total power requirement 4 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1430 x 950 x 1550 mm Bed Slide (Z-Axis): - Guide length of the bed slide: 350 mm - Bed width: 205 mm - Slide travel: 500 mm - Max. feed force: 3500 N Flat slide (X-axis): - Slide travel: 150 mm - Slide width: 140 mm - Max. feed force: 2500 N Upper slide (Z-axis): - Slide travel: 100 mm - Slide width: 92 mm - Swivel range of the cross slide: 75 ° Dkedpfxsz St Nxj Aiijw

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Guideways "Good" Dkjdpfx Ajztfiuoiiew -Optional 3-axis digital display -Center height 165 mm -Swinging diameter over bed 330 mm -Distance between centers 800 mm -Speed range 28-2800 rpm -Automatic longitudinal / crossfeed -Spindle bore approx. 40 mm -Threading / Metric / Inch, etc. -Collets / Quick-change tool holder incl. 20 collets -Three-jaw chuck -Multifix with inserts -Chip guard -Drill chuck / Follower point -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 850 kg

Condition: good (used), CNC turning machine WEILER DZ42 CNC. Year of manufacture 2001, serial number 173, CNC Siemens 840C, machine weight approximately 3,800 kg, with bar feeder HATEC AM9. Dkodsz R R Htspfx Aiijw

Condition: used, functionality: fully functional, Technical data: Distance between centers approx.: 500 mm Center height over bed: 125 mm 16 spindle speeds Range 1: from 110 – 900 rpm Range 2: from 440 – 3600 rpm Space requirement, length x width: 1.2 x 0.6 m Dodpfxjz R D H Eo Aiijkw Estimated weight approx.: 400 kg

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Condition of guideways: "Good" -Optional 3-axis digital display -Center height 165mm -Swing over bed 330mm -Distance between centers 800mm -Spindle speed range 28-2800 rpm -Automatic longitudinal / crossfeed -Spindle bore approx. 40mm -Threading capabilities / Metric / Inch, etc. -Collet chuck - quick-change system -Four-jaw chuck -Multifix base and insert -Chuck guard -Coolant system -Emergency stop Dkodpfx Aiszta Dmsiew -Documentation Dimensions: L x W x H 2.0 x 0.8 x 1.6 meters / Weight 850 kg

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Dksdpfx Aieyuyruoiew Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself. Dedpozd Tycsfx Aiiskw

Condition: used, Various supports for the WEILER 260. Dsdpfxsz Rxh Re Aiiskw

Condition: used, Year of construction: 1999, Turning machine, cycle-controlled Weiler E50 Year of manufacture: 1999 Control system: Weiler cycle control D1 Operating hours: 28,506 Distance between centers: 1,000 mm Dkjdszt S Svspfx Aiiew Distance between centers (height): 280 mm Max. chuck diameter: 315 mm Max. diameter over bed: 570 mm Max. diameter over cross slide: 340 mm Max. diameter over offset: 600 mm Length of offset: 140 mm Max. workpiece weight: 1,600 kg Spindle bore: 83 mm Spindle head: Size 8 Quick-change tool holder: Parat 4-position turret Includes 1 chuck, RÖHM, new! Dimensions: 2,850 x 2,280 x 1,750 mm Weight: 3,350 kg Available immediately 31126ä

Condition: good (used), Year of construction: 1995, CNC turning machine WEILER UD 24 CNC, CNC Bosch CC300, bar feeder. Dksdpjz R R D Eefx Aiiow

Condition: used, functionality: fully functional, Mechanic's lathe, manufactured by WEILER Dkedpfx Ajz D Ut Ioiisw Spindle speeds, continuously variable Level 1: from 160 - 900 rpm Level 2: from 320 - 1800 rpm Technical data: Center distance approx. 500 mm Center height above bed approx. 125 mm

Year of construction: 1997, condition: used, Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible. Dedpfezxr R Nex Aiiokw

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, spindle motor power: 4,000 W, total height: 1,700 mm, total width: 890 mm, overall weight: 1,050 kg, bar diameter (max.): 43 mm, product length (max.): 1,570 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details. • Machine Type: Centre Lathe • Turning Length / Distance Between Centres: 500 mm • Swing Over Bed: 280 mm • Swing Over Cross Slide: 150 mm • Spindle Nose (DIN 55027): Size 5 Dsdpfx Aozpwh Uoiijkw • Front Bearing Diameter: 70 mm • Spindle Bore: 43 mm • Main Spindle Internal Taper: ME 50 • Drive Power (100% Duty Cycle): 4 kW • Spindle Speed Range: 30 – 4,000 rpm • Number of Feed Rates: 24 • Longitudinal Feed Range: 0.02 – 0.63 mm/rev • Cross Feed Range: 0.006 – 0.20 mm/rev • Metric Thread Range: 0.25 – 8 mm • Inch Thread Range: 80 – 2 TPI • Module Thread Range: 0.25 – 4 Module • Diametral Pitch (DP) Thread Range: 200 – 5 DP • Tailstock Quill Diameter: 40 mm • Tailstock Quill Travel: 85 mm • Tailstock Taper: MT3 • Operating Voltage: 400 V • Control Voltage: DC 24 V • Connected Load: 7.5 kVA • Nominal Current: 15.5 A • Frequency: 50 Hz • Main Fuses: 25 A • Machine Weight: 1,050 kg • Machine Dimensions (L × W × H): 1,570 × 890 × 1,700 mm Additional Equipment • 4-Position Quick-Change Tool Post PARAT Size 1, incl. 1 × WD 1/12 Tool Holder • 2 × WD 1/12 Tool Holders • Lever-Operated Collet Chuck for 173 E Collets • 13 × 173 E Collets, Clamping Range: 3–15 mm (1 mm Increments) • Fixed Steady Rest with Roller Jaws, Capacity: 15–100 mm • Movable Chip Splash Guard with Viewing Window • 8 × Levelling Elements Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2004, Weiler Primus VC Lathe Primus VC with Heidenhain digital readout, year of manufacture 2004, in excellent original condition. The machine comes from the prototype workshop of a renowned German mechanical engineering company. CE compliant! Technical Data: Year of manufacture: 2004 Weiler Primus VC Center height: 140 mm Center distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE conformity declaration About the machine: The Weiler Primus VC is the smallest machine in the Weiler range. The Weiler Primus VC is a lathe for the highest demands: with stepless speed control, constant cutting speed, and a powerful 4 kW drive (40% duty cycle). The compact machine of great quality is found wherever maximum precision is required in limited spaces: such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Dodpfey I U Dyex Aiiekw Offered here is a Weiler Primus VC lathe with Heidenhain digital readout, year of manufacture 2004. This lathe is in excellent, original condition. It comes from an operation where it was lightly used only for prototype construction. Very easy-to-use controls. The guideways are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically tested by us. Take the opportunity to view and test the Weiler Primus VC under power at our site. Further lathes from well-known manufacturers can be found on our website.

Condition: good (used), Year of construction: 2007, cycle controlled lathe Machine type: Weiler E 120 x 3.000 Control: Weiler D3 Year: 2007 Power on time: ca. 41.000 h SPECIFICATIONS Max. turning length: 3.000 mm Turningdiameter: 830 mm Max. swing over bed: 1.200 mm Bettbreite 600 mm Spindle bore: 165 mm Spindelkopf DIN55027 Gr 15 Collets: Forkardt 3KS 800mm Spindle speeds: 1 - 280 / 4 - 900 rpm Transmission ratio: 2 Torque: 8.000 Nm Dodjzizd Tjpfx Aiijkw Amount of turrets: 1 Sauter 4-Fach Kopfrevolver für 140mm Aufnahmen Tailstock Quill diameter: 140 mm quill range: 400 mm Equipment Electronical handwheel Hydraulisches Kraftspannfutter Forkardt 3KS 800mm Chip conveyor

Condition: ready for operation (used), L & Z Lathe WEILER CONDOR VS incl. RSF Digital Display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm -Speed range 28 - 2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 38mm -Tailstock -RSF Digital Display -Multifix base with inserts -3-jaw chuck & quick-change jaws -Collets / quick-change chuck incl. collets -Drill chuck / rotating center -Bed stop -Chip guard Dkedpszn Rahsfx Aiijw -Coolant system -Emergency stop / On/Off switch -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 900 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1987, CNC turning machine WEILER Primus 2 CNC, serial number 151, CNC control system by Bosch. Dkjdpfxoz R R Eis Aiijw

Condition: reconditioned (used), Year of construction: 2001, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 2001 – partially overhauled Newly painted RAL 7035 light grey Machine No.: 4790 Center height: 160 mm Distance between centers: 650 mm Warranty: 6 months on the mechanics, which have been partially overhauled by us. The warranty does not cover the electrical and electronic components, as they have only undergone a functional test. For machines located outside our North Bavarian sales area, the travel costs must be borne by the customer. Dodpfx Aijzy Ngqjiskw Geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T, new - Lever-type collet quick-change chuck for collet type K32 (386E) - Covered guide and lead screw - Braked drive motor - Coolant system - Electrically secured chuck guard, new - Quick-change tool holder size A - Simple bed stop - Chip guard - Operating manual Used, as is The machine is technically in the condition corresponding to its original year of manufacture.

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 54 mm, turning diameter: 410 mm, center width: 950 mm, center height: 200 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, Equipment: documentation/manual, Dear Sir or Madam, We offer for sale a WEILER E35 CNC cycle lathe. The Siemens 805 cycle control and electronic handwheels make operation very simple and extremely convenient. The machine has been thoroughly inspected in our workshop, is in fully functional condition, and is available for a power-on test at any time. We look forward to your inquiry! Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn components are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - You can freely choose the paint color of your selected machine - Additional accessories such as tools can be ordered directly if required - On request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation for you Dodpfxeyaluls Aiiekw