Used Weber for sale (105)

Condition: good (used), Weber RSM 600 Index Cutting Machine Machine in very good condition, ready for production. This machine cuts registers from finished bindings and loose sheets. Manufacturer’s description: Automatic cutting by activating two manual buttons. Interchangeable knife shapes. Material holding pressure. Redpjx N D T Hofx Ahzsbt Capable of cutting large stacks of material in a single pass. Safety guards ensure safety. 380V power supply + compressed air. Stack height for a single cut is approximately 30mm. Approximate dimensions: 120x120x180cm, weight: 900kg.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Rjdox Rx D Aspfx Ahzjbt Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Redpeku Aw Njfx Ahzsbt Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Crane lugs Construction type: upright Remarks: Cylinder manhole NW 600; minor sheet cut-outs in the insulation jacket Outer diameter: 3,200 mm Inner diameter: 3,000 mm Total length: 12,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 250 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 1.5 bar Mounting type: feet Location: Bremen Rbsdpoxqb Rvofx Ahzst Technical documentation: drawing Nameplate: Vacuum: 0.2 bar Volume: 60,000 liters Jacket volume: 105.0 liters Wall thickness (cylinder): 5 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 9,000 mm Last application: rapeseed oil TANK Max. permissible operating temperature: 200 °C Number of feet: 4 units HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manhole / access: on cylinder, top head, top head (DN 600) Outlet: flange DN80 Note: dents on insulation jacket, manhole cover plated MATERIAL SPECIFICATIONS Jacket system material: V2A 1.4301 (AISI304) Feet material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top wall thickness: 7 mm

Condition: used, tank capacity: 10,875 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; In some areas, the flanges of the top head were welded on the inside with a stainless steel sheet by the previous operator (in some of these sheets, an opening has been cut – see photos); Manhole diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Rbodpfx Ahoxqa Nwezot Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar RW Sealing: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Standing form: Ring Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Double-jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Double-jacket material: V2A 1.4301 (AISI 304) Product-contact surface material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 2,200 mm Previous application: Adhesives industry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in top head Outlet: present Note: minor residues, manhole cover missing Outlet: 100 mm MATERIAL SPECIFICATION Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 Volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Agitator arrangement: central in top head Top head wall thickness: 14 mm

Condition: new, Diamond Weber WM 306791 A/R0 3 diamond tool , serial no. according to photo ,unused in original box, 100% functional, scope of delivery according to photos Rjdpfoi D Upkox Ahzjbt

Year of construction: 1989, condition: good (used), Power trowel, concrete trowel, screed trowel -without a flat iron Rsdpfx Ahob A Hdfozebt -Weight: 60 kg

Condition: used, Year of construction: 2011, Used Machine Year of manufacture: 2011 WEBER LCE-2-1350 (DK) Compact Wide Belt Sander with two sanding belts, suitable for calibration, veneer, and intermediate lacquer sanding. Features a constant working height and is equipped as follows: Sanding Units: Contact Roller Unit · Grooved steel contact roller Ø 210 mm for precise calibration · Mechanical adjustment of the contact roller for grit compensation · Pneumatic lifting of the contact roller Redpfex Hll Esx Ahzobt Combination Unit · Grooved rubber contact roller Ø 130 mm, 60 Shore hardness - mechanical adjustment for grit compensation · Pneumatic lifting of the contact roller · Electronically controlled sanding pad with ISA-System 22/22 ISA (Intelligent Sanding Pressure Adjustment) · Patented segmented pressure beam system with full tolerance compensation · Pressure shoe width: 22 mm (movable longitudinally and laterally) · Universal lamella with pinpoint actuation suitable for all sanding applications (no need to change sanding lamella between veneer and solid wood sanding) · Tolerance compensation: +/- 1 mm ISA-Control · High-resolution workpiece detection with a switching roller per pressure shoe · Free feeding of complex part shapes – multiple feeding with minimal lateral spacing · Sanding intensity individually adjustable at all edges · Sanding pressure adjustable via pressure regulator · Feed-controlled infeed and outfeed Drive · Sanding belt speed from 2–18 m/s for high material removal rates · Wear-free DC braking · Self-tensioning belt drive Belt Control · Automatic compensation of unequal sanding belt edge lengths · Optical, contactless, and self-cleaning sanding belt detection on the belt change side · Fine adjustment of oscillation on the belt change side · Belt run-off switches left and right Operator Terminal ‘SIEMENS’ MP 177 6” · Graphical user interface via 6” color display · Program memory for 18 programs · Parameter settings available via program Overthickness Protection · Safety bar at machine infeed with the following functions: · Automatic lifting of contact roller and segmented pressure beam · Feed shutoff Workpiece Feed · Rubber-coated and spring-loaded pressure rollers before and after the sanding station · Secure workpiece transport with multiple feeding ensured by pressure lamella with tolerance compensation · High-quality transport belt made of natural rubber · Infinitely variable feed speeds for calibration and fine sanding · 400 mm table extension at both infeed and outfeed with rollers Technical Specifications · Working width: 1350 mm · Sanding unit drive (frequency controlled): 1 x 15.0 kW Availability: Approx. April 2026 Location: Heidelberg

Year of construction: 1999, condition: good (used), Brand: Hans Weber GmbH Model: ZE 20 Screw type: Single screw Year of manufacture: 1999 Rbjdox Ek Tljpfx Ahzjt Screw diameter: 20 mm L/D ratio: 20 L/D Motor power: 3 kW Control voltage: 200 V Dimensions (LxWxH): 3100 x 1200 x 1280 mm Weight: approx. 300 kg Other: – Including swivel mounting arm – Including extra connection box

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Redpfxjx Dxq Ho Ahzebt

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Rjdpfx Ahjfp A I Eszobt Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: good (used), functionality: fully functional, Weber Skinner Machine Function: Used in the food processing industry(especially Rodpfx Asxxuq Ejhzebt meat and poultry) to remove skin, rind, or membranes from cuts of meat. Technical Data: Model: A-VI 520 working width: 520 mm (approx. 20.47 inches). Type of Machine: Derinder or Membrane Skinner Manufacturer: Weber Maschinenbau, a major manufacturer of food processing equipment.

Condition: good (used), functionality: fully functional, Program-controlled automatic grinding device for wet-ginding of sickle shaped Weber-knives (max. blade length 650 mm) angular adjustment of grinding disc 22°, 26°, 28° and 32° Rbsdpfx Ahjxxt T Eszst including cam disk for Weber sickle knives with a distance centre of rotor to cutting edge R400 mm (70311822) Technical Data: Model: SSG 400 Sharpening disc 50 x 25 x 20 mm Grinding disc 100 x 40 x 50 mm Drive: Transmission-brake-motor Electric: 400 Volt, 50 Cycles, 0,25 kW, 16 A Dimensions: 1.100 x 510 x 1.770 mm (W x D x H) weight: 300 kg

Condition: like new (used), functionality: fully functional, The Weber Slicer 305 is positioned as a powerful, compact, entry-level solution to high-tech industrial slicing, designed for low-to-medium volume production with maximum flexibility and hygiene. Performance & Precision High Slicing Speed: Features a circular blade cutting system with a maximum cutting speed of 400 slices per minute (rpm). Wide Thickness Range: Offers great flexibility in product output with a cutting thickness ranging from 0.5 mm up to 50 mm. Versatile Slicing Presentations: Capable of producing a variety of presentations, including stacked, staggered stack, shingled, cross-shingled, endless shingled, and folded portions. Product Capacity: Can handle product lengths up to 800 mm with a slicing throat width of 250 mm and height options of 125 mm. Operational Benefits Ease of Operation: Described as easy to operate and "Plug & Play" (for the Basic model).Intuitive Control: Uses the Weber Power Control with a programmable touch screen color touch display for the Basic), ensuring rapid product changeovers. Rbjdpfx Aexxlhushzjt Superior Hygiene: Built with Weber Hygienic Design, which includes open designs and easy-to-clean components for simplified washdown. Quick Set-up Time: Allows for fast format and product changes via tool-less adjustable components. Ergonomic Blade Change: Includes a pivotable blade safety cover for safer and ergonomic blade changes. Manual Loading: Features manual loading, making it particularly suitable for small batches, frequent product changes, or special formats.

Condition: used, Year of construction: 2002, Burkhart & Weber MCX 900 – 4-Axis Machining Center - Siemens SINUMERIK 840D CNC control - Double pallet changer, pallet at loading station rotatable, total pallets: 6 - Rack-type tool magazine with 264 tool positions and tool setup station for loading during runtime - Rapid traverse X/Y/Z: 40 m/min / B-axis: 20 rpm - Max. machining force X/Y/Z: 20 kN / Tangential torque B-axis: 20,000 Nm - Renishaw wireless probing system - Year of manufacture: 2002 Technical Data Working ranges: - X-axis: 1,600 mm - Y-axis: 1,400 mm - Z-axis: 1,500 mm - B-axis: 360° / 0.001° Speeds: - Spindle speed: 20 – 6,000 rpm - Gear ranges (2): 20–1,400 / 1,401–10,000 rpm Feed rates and forces: - X/Y/Z-axis rapid traverse/feed: 40,000 mm/min / 20,000 N - B-axis speed/torque: 20 rpm / 20,000 Nm Tool magazine: - Magazine type: rack magazine - Number of tools: 264 Tools: - Max. tool weight: 60 kg - Max. tool length: 560 / 750 mm - Tool holder: DIN 69893 / HSK A-100 - Tool clamping force: 40 kN Pallets: - Pallet size: 800 x 1,000 mm - Pallet changer: double - Pallet weight: 800 kg - Max. allowable pallet weight: 3,150 kg - Pallet design: T-slots - Workpiece loading station: manually rotatable (4 x 90°) Coolant system: - Internal coolant (through tool): 30 l/min / 50 bar - External coolant: 200 l/min / 4 bar Drive power: - S1 operation 100% duty cycle: 37 kW Rodpoxxbbwjfx Ahzjbt - S6 operation 40% duty cycle: 50 kW Electrical: - Voltage: 3 x 400 V / 50 Hz +10% - Control voltage: 230 V AC / 24 V DC - Rated current: 130 A - Connected load: 65 kW / 75 kVA Hydraulics: - Tank: 240 l - Pressure: 60 bar Pneumatics: - Pressure: 4 – 6 bar - Consumption: 10 m³/h

Condition: good (used), Year of construction: 2007, Weber ASB 560 Skinning Machine A machine like no other! A robust, high-performance machine for industrial use.  The Weber ASB 560 – premium quality – is a true industrial workhorse. The machine is equipped with a cleaning mode, allowing for thorough and effective cleaning. It's highly efficient, has a long lifespan, and is relatively easy to maintain. Manufacturer: Weber Model:ASB 560 Year:2007 Belt Widt:500 mm Power:50Hz / 400V / 1,1kW Rbedpfsx Ap E Esx Ahzjt Machine Dimensions LxWxH:2.100x1.000x1.250 mm Machine Weight:400 kg.

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Rbsdpjhy Tp Dofx Ahzot Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: used, mileage: 1,001 km, power: 4 kW (5.44 HP), gearing type: other, fuel type: diesel, color: yellow, first registration: 01/1999, Year of construction: 1999, driver cabin: other, Vehicle location: Bovenden, Hatz Diesel Engine E 673LS! Forward and reverse gear! Rsdpfxoxy Swxe Ahzsbt The exact year of manufacture and power output cannot be determined as there is no type plate present! Equipment details provided without guarantee; subject to change, prior sale, and errors!

Condition: used, mileage: 1,001 km, power: 2 kW (2.72 HP), gearing type: other, fuel type: gasoline, color: blue, empty load weight: 62 kg, first registration: 01/2018, Year of construction: 2018, driver cabin: other, Vehicle location: Bovenden. Honda GX R120 petrol engine! Accessory specifications provided without guarantee; subject to changes, prior sale, and errors reserved! Rjdexy Swrjpfx Ahzsbt

Condition: used, mileage: 1,001 km, power: 3 kW (4.08 HP), gearing type: other, fuel type: gasoline, color: blue, empty load weight: 103 kg, first registration: 01/2017, Year of construction: 2017, driver cabin: other, Vehicle location: Bovenden, Honda GX 160 petrol engine! Rbodpfx Ahexy Sw Eezjt Includes rubber mat! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set - Suitable for single wall pipes up to 220mm Rodpfx Ahoua E H Sszebt

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 Rbsdpfouziyhsx Ahzjt - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Redpfx Asxu U Trehzebt Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, Weber Loading Conveyor Model CZB Rodpfxextfz Rs Ahzjbt Stainless steel

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Rjdoxf Up Uspfx Ahzebt Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.