Used Wcl 5 for sale (59,429)

Condition: used, mileage: 926,538 km, power: 210 kW (285.52 HP), first registration: 09/2006, fuel type: diesel, number of seats: 37, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 155) First registration: 08.09.2006 926,538 km Engine: 6,374 cc Fgedpfx Akoz H Ecreyjh 210 kW / 286 hp Euro 5 EEV MOT valid until 01/2027, technical inspection valid until 10/2026 Permissible gross vehicle weight: 19,000 kg, unladen weight: 11,340 kg, payload: 7,660 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front: 80% remaining tread, rear: approximately 30/30% remaining tread, inner tires: approximately 40/40% remaining tread Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microwave Manual windows 2 x electric and heated mirrors Auxiliary heating + 2nd heating Retarder Stop brake LAWO system connected to the cash register Emergency stop 12-volt socket Tie rods corroded 14.02.2024: Alternator tensioner replaced, 07.05.2025: Radiator replaced, water pump sealed, 07.04.2026: Upper control arms on the front axle (left and right) replaced, 26.07.2024: Brakes and discs on the front axle replaced, both brake chambers on the front axle replaced, 29.10.2024: Pressure switch for the air system, circuit 1+2, replaced with air line, 24.01.2025: Four-circuit pressure valve replaced Various signs of wear and tear, consistent with the vehicle's age Last inspection: 21.01.2025 at 873,162 km, next inspection due at 933,162 km Price: 3,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are reserved.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 1,750 kg, first registration: 01/2000, loading space length: 9,200 mm, loading space width: 2,400 mm, total length: 10,070 mm, total width: 2,480 mm, wheelbase: 6,700 mm, Year of construction: 2000, Axle configuration Rear axle 1: Max. axle load: 1750 kg Rear axle 2: Max. axle load: 1750 kg Weights Unladen weight: 2,340 kg Payload: 2,660 kg GVWR: 5,000 kg Functional Body manufacturer: Masta Dieplader Be Oplegger Openlaadbak Load bed height: 65 cm Maintenance, history and condition APK (Technical Inspection): valid until 04.2027 Technical condition: good Visual condition: good = Company Information = Nidro cars Holland is located in the centre of the country and is the right place to buy your car, van or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: FIND OUR ENTIRE STOCK AT All types of trade are possible with us! Fsdpfsz Ih D Isx Akyogh (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, mileage: 480,115 km, power: 185 kW (251.53 HP), first registration: 01/2010, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro5, color: white, brakes: retarder, Year of construction: 2010, Equipment: ABS, parking heater,

Condition: used, Year of construction: 2011, Year of manufacture: 2011 Empty weight: 15.600 kg Carrying capacity: 87.400 kg GVW: 103.000 kg Fgodpsz I Acfefx Akysh Production country: DE Please contact Theo Lelie , , ) for more information

Condition: ready for operation (used), Year of construction: 1999, SM 74-5P2 L, 1999 year Fully rebuild and renewed by heidelberg 2012. All auto washes Fedpfx Aoyi Uxxjkyegh autoplate Temperating rollers technotrans 198 mil imoressions.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 8,343 h, load capacity: 3,500 kg, lifting height: 4,900 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Fgedpoz N N Dtsfx Akyjh Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: Front forklift DOOSAN D35C-5 - 3.5 ton lifting capacity - Year of manufacture 2008 - Sideshift - TRIPLEX free lift mast - Overall height 2.34 m - Lifting height 4.9 m - 8,343 operating hours according to meter - 4-cylinder YANMAR diesel engine, 58 HP - Solid rubber tires approx. 90% - Full cab, heating, lighting system - mechanical version - good condition - PRICE: 12,500 EUR plus VAT. Sideshift, third valve, rear work lights, front work lights, partial cab, heating, full cab,

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Fgedpfxjvvi N Ie Akyoh

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Fsdsw N Iz Hspfx Akyegh Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: used, mileage: 526,298 km, power: 340 kW (462.27 HP), first registration: 01/2011, fuel type: diesel, number of seats: 59, gearing type: automatic, emission class: euro5, color: green, brakes: retarder, Year of construction: 2011, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: used, mileage: 246,811 km, power: 140 kW (190.35 HP), first registration: 09/2018, fuel type: diesel, overall weight: 3,050 kg, next inspection (TÜV): 05/2027, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * Vehicle number for customer inquiries: 4857 * Navigation system * Air conditioning * Parking assist camera * Automatic transmission * Auxiliary heater * Electronic Stability Program (ESP) * Trailer coupling * Central locking * Cruise control * Particulate filter * Multifunction steering wheel * Electric windows * On-board computer * Anti-lock braking system (ABS) * Power steering * Electric side mirrors * Bluetooth * Power steering * Environmental badge (green) * Five-seater * 3-seater bench seat, comfort, 1st row * Steel rims * Well-maintained, service booklet available * Hands-free system * Parking assist sensors, rear * DAB radio * Armrest * Particulate filter * On-board computer * Traction control * Electronic Stability Program (ESP) Fgjdpfxoz Rhycs Akysh * 4/5 doors * Central locking No liability for printing and typographical errors. Sales only to business customers. Subject to errors and prior sale. * Changes, prior sale, and errors expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract shall be binding. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer. * Guarantee insurance possible upon request from the insurance company. * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners. * Customs license plates for 30 days. * All customs documents for export are available, but must be requested individually. * TOLL charges for Toll-Collect can be booked in-house. * Free transfer from Stuttgart Airport or Metzingen (Württemberg) train station. * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * Constantly over 200 vehicles in stock.

Condition: excellent (used), mileage: 415,131 km, power: 235 kW (319.51 HP), first registration: 06/2012, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2012, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, spoiler, = Additional options and accessories = - Aluminum fuel tank - High Beams - Lift Axle - Radio/CD player - Roof Spoiler - Sun visor - Toolbox = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle GVW: 26.000 kg Fgedpfx Aksz I Tdtsyoh Technical condition: very good Visual appearance: very good Registration number: CH842BC = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering a top-quality Jungheinrich forklift; it underwent a complete "5-Star" refurbishment by Jungheinrich in 2021 and has logged only 45 hours since that time. The paintwork is original and has not been repainted or touched up! The forklift has always been stored indoors and is in excellent condition. Maintenance and safety inspections (UVV) are up to date. The manual and keys are, of course, included. Last major service: October 2024 Safety inspection (UVV) valid until: 10/2025 Operating hours: 7,792 (7,744 since refurbishment) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-Star refurbishment: 03/2021 (complete), including Kaup fork positioner T466 Load capacity: 4,000 kg Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: Triplex mast including full free lift Fgsdszn Uv Topfx Akyoh Equipment: Solo-Pilot control, road-legal lighting (StVZO), LED lighting (2 front and 2 rear work lights), front/roof/rear cab windows Steel doors, leather seat, rearview mirror, armrest, auxiliary hydraulics (2 functions) Kaup fork positioner (NEW): 4.8T 466B The vehicle has run for only 45 hours since its refurbishment; all safety inspections and maintenance work have been carried out. Please feel free to contact us if you have any further questions!

Condition: new, overall weight: 2,000 kg, empty load weight: 1,600 kg, maximum load weight: 400 kg, loading space length: 5,490 mm, loading space width: 2,290 mm, loading space height: 2,120 mm, tire size: 155r13c, Car trailer as a construction trailer for 12 people. The insulated *stay trailer* is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. An electric heater provides support in very cold weather. Fjdpoqwi Nksfx Akyogh Self-sufficient thanks to WC in separate room with lockable door and storage room. The use of a crew trailer is possible on any construction site. As a normal *car trailer*, it can be driven to the construction site by a simple car. These vehicles are also used as *burro trailers*. Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, extra room with outside door with chemical toilet and sink, storage room with door and shelf, stairs for hanging and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, Refrigerator, coffee machine, connection cable, 230V fuse box with RCD, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, four sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet room with toilet, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.

Condition: used, mileage: 95,379 km, power: 78 kW (106.05 HP), first registration: 10/2013, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 08/2027, fuel: diesel, fuel consumption (urban): 8.9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,849 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2013, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 from Deutsche Post. Other services: - Various loading options - Registration service - Delivery available throughout Germany for an additional charge Viewing possible without prior appointment: Mon – Fri: 08:00 to 17:00 Sat: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-mail: Fgodpfx Akjz Rhm Neyoh Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sale only to businesses (agriculture, freelancers, small and large enterprises) or for export. Errors and prior sale excepted. CoC available.

Condition: used, mileage: 112,976 km, power: 78 kW (106.05 HP), first registration: 03/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel consumption (urban): 8.9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 from Deutsche Post. Other services: - Various loading options - Registration service - Delivery available throughout Germany for an additional charge Viewing possible without prior appointment: Mon – Fri: 08:00 to 17:00 Sat: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sale only to businesses (agriculture, freelancers, small and large enterprises) or for export. Errors and prior sale excepted. Fsdpfxsz Rhnaj Akysgh CoC available.

Condition: used, mileage: 261,699 km, power: 62 kW (84.30 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 1,421 kg, maximum load weight: 741 kg, overall weight: 2,162 kg, axle configuration: 4x2, wheelbase: 2,681 mm, fuel: diesel, CO₂ emissions: 161 g/km, fuel consumption (urban): 7.7 l/100km, fuel consumption (extra-urban): 5.1 l/100km, fuel consumption (combined): 6.1 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 1, total length: 4,406 mm, loading space length: 1,890 mm, Year of construction: 2012, construction height: 1,820 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 vehicles from Deutsche Post. Fedpjz Rhn Hofx Akyjgh Other services: - Various loading options - Registration service - Delivery available throughout Germany for an additional charge Inspections possible without appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-Mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sales to businesses only (agriculture, freelancers, small or large enterprises) or export. Subject to errors and prior sale. CoC available.

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve Fedpsz Imiiefx Akyogh -Adapter sleeve: Morse taper sleeve MK6 -Type: Reducing sleeve MK6/5 -Dimensions: Ø 64/220 mm -Number: 6x Morse taper sleeves available Price: per piece -Weight: 2.5 kg/pc.

Condition: used, Year of construction: 2023, operating hours: 381 h, Bomag BW100ADe-5 roller from the year 2023 with only 381 operating hours! Electric! ----* Manufacturer: Bomag * Type: BW100ADe-5 Fjdpfsz N Nyzox Akyegh * Year of manufacture: 2023 * Recorded operating hours: approx. 381 * Electric * Edge cutter (KSG) * Heated seat * Operator protection roof * LED * Top condition * Power: 19.2 KW * Video available upon request (WhatsApp ERIK) * CE declaration available * Price: 22,900 Euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information without guarantee, errors and prior sale excepted.

Condition: used, mileage: 207,000 km, power: 88 kW (119.65 HP), first registration: 12/2019, fuel type: diesel, overall weight: 2,430 kg, next inspection (TÜV): 05/2028, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 4,825 mm, total width: 1,839 mm, total height: 1,847 mm, loading space length: 940 mm, loading space height: 1,150 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Ford Transit Connect Trend Automatic, crew van, long L2 with 5 seats, 88 kW, ideal for trades and businesses Maintenance history: 12/2019 / 8 km: Delivery inspection 01/2021 / 33,470 km: Inspection + engine oil change + pollen filter 10/2021 / 56,613 km: Insp. + engine oil change + pollen filter 08/2022 / 78,845 km: Insp. + engine oil change + air filter + fuel filter + pollen filter + brake fluid 05/2023 / 95,873 km: Insp. + engine oil change + pollen filter 02/2024 / 113,241 km: Insp. + engine oil change + air filter + fuel filter + pollen filter 06/2025 / 159,760 km: Insp. + engine oil change + air filter + fuel filter 10/2025 / 177,349 km: Insp. + engine oil change + brake fluid 05/2026 / 205,622 km: Insp. + engine oil change + air filter + fuel filter + pollen filter Condition of brakes: Front almost like new, rear good 09/2026: Air conditioning compressor renewed at Ford authorized dealer, €1,515.00 gross According to the Ford service history, the automatic transmission was renewed at 138,000 km / November 2024 Truck registration (N1), van Increased payload 2430 kg GVWR Bi-XENON headlights 5 seats (Seat Package 25) - 2 single seats in front, 3-seater bench in the 1st row with Isofix mounts (2x) - Sliding partition, increases the cargo area, the van then becomes a 2-seater 8-speed automatic transmission - Type: 8F35 (8-speed) Original aluminum rims (summer tires) Heated windshield Heated seats on both sides, adjustable 2-zone automatic climate control with dust and pollen filter Auxiliary heater for diesel engine Audio-navigation system package 9 (with Ford SYNC), color touchscreen - App-Link (Apple CarPlay, Android Auto) - Radio DAB (Digital Radio), FM - USB connection, Bluetooth audio - Hands-free phone system, Bluetooth interface, operation on the steering wheel - Voice control - FordPass Connect including eCall Multifunction leather steering wheel in aluminum look Driver assistance systems: - PDC (ParkPilot) front, rear, optical and acoustic display - Rear view camera - Active Park Assist Plus, self-parking - Adaptive and intelligent cruise control, with braking function - Traffic sign recognition - Pre-Collision System, forward collision warning system active with braking function - Lane keeping assistant - Driver fatigue detection - Hill start assist - Tire pressure monitoring system - Emergency brake assist - ABS, ASR, ESP - ECO program (ECO Coach) - Automatic headlight control - Automatic windshield wipers Airbag package, 6 airbags - Front airbags Fsdpjz I Dkwsfx Akyegh - Side airbags in the seats - Head airbags in the roof pillars On-board computer / fuel consumption computer Fog lights Central locking with remote control Electric windows front and rear Exterior mirrors electrically adjustable, heated and foldable Model update Front bumper in body color Body: Van (similar to a panel van) Tinted windows all around (rear dark) Roof rails prepared Wheelbase 3062 mm Driver's seat adjustable (seat height, backrest, lumbar support) Passenger seat adjustable (backrest) Tire repair kit Engine 1.5 L - 88 kW EcoBlue TDCi CAT In the passenger compartment: Movable grid in position. Variable loading area: Bench seat (also partially) foldable, passenger seat foldable. Cargo area equipment: Robust, plastic-coated wooden floor. Cargo area light. Side walls covered with plastic inserts. Load securing by means of eyelets. Cargo area dimensions (all approx.): Length: - rear compartment: bottom approx. 94 cm, middle approx. 86, top approx. 82 cm (without ins

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment Fgjdpfjwgwmhex Akyeh TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5921, overall weight: 12,000 kg, input current: 41 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, 5-axis CNC machining center 2 retractable tables, 1700x1425 mm each Linear axes X-4300, Y-2300, Z-1200 mm Rotary axes B +/- 120, C +/- 240 Tool magazines, 2 x 6 positions OSAI control system Bertronic remote control with teach-in functions 7.5 kW electrospindle, HSK-63F 2 vacuum pumps, 100 m3/hour, two clamping zones (can be combined into one large zone) Exhaust hoods for chip removal around the tables in the work area RENISHAW TS27 probe for tool length measurement and rotary axis calibration Free-standing electrical control cabinet Fjdpez H Slmofx Akyegh Complete enclosure of the machine to protect against dust and noise CE marking The machine is installed and connected – it can be tested.

Condition: used, mileage: 123,007 km, power: 62 kW (84.30 HP), first registration: 06/2013, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 06/2027, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2013, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Are you looking for a versatile van that combines functionality, comfort, and everyday practicality? The Volkswagen T5 van offers a solid foundation for trades, services, assembly work, commercial businesses, and transportation. The convenient sliding door provides quick and easy access to the cargo area and facilitates loading and unloading. Parktronic assists with maneuvering and provides additional visibility – especially when parking in tight spaces. With a displacement of 1,968 cm³ and a mileage of 123,000 km, this vehicle offers an interesting basis for commercial use. The initial registration date of 06/2013 completes the overall package. Sliding door, Parktronic, and proven van quality – a practical overall package for a comfortable and efficient workday. Get in, load up, and get straight to work – convince yourself of this Volkswagen T5 van! Fgsdpfx Akez Rhn Teyoh Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sales excepted.

Condition: good (used), 5-axis clamping system ATORN 5 AX 100 Version 7.1 Fgsdpfx Aksz Huchjyeh (2 pieces including base plate, can be used with zero-point clamping systems) - Jaw width: 100 mm - Clamping height: 250 mm - Clamping range up to 550 mm (reducible to 175 mm or 200 mm) In very good condition.

Condition: used, Year of construction: 2011, 5 machines are only sold as a PACKAGE. Includes a large set of tool holders, fixed + driven. 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: Fgodpfxjzxhxvo Akysh - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar loader 2x FMB / 1x Breuning Includes tools for the TRAUB machines Tools + clamping devices: - 54 x driven tool holders - 181 x fixed tool holders - Collets, etc. See photos The machines come from ongoing production. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar loader TOP ETL 8-45 One machine comes from ongoing production, one has already been used as a source of spare parts, several components have been removed. Dismantling and loading can be organized by a specialist company for an additional fee.

Condition: used, For sale is a high-quality 5-axis centering vise from the premium brand LANG Technik, part of the “Makro-Grip Original” series. This clamping system is the industry standard for 5-axis machining and guarantees maximum clamping forces thanks to its patented form-locking technology. Technical data & details: Manufacturer: LANG Technik Model: Makro-Grip Original Jaws: Equipped with Makro-Grip textured jaws (marking S3130) Fgsdjz I Em Tepfx Akyoh Condition: Used industrial quality, with normal, visible signs of wear, fully functional. Special features: Integrated scale on the base body for quick positioning, "Made in Germany".