Used Vertical Milling for sale (15,299)

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kjdpfx Asxxmmrsd Newt Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm table dimensions 1.250 x 610 mm Control Heidenhain turning speeds 15.000 U/min rapid traverse 32 m/min feed 20.000 m/min number of tool places 60 Pos. spindle hours ca. 3108 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Kedjxwzhnjpfx Ad Nswt Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 355 turning speed range 40 - 4000 U/min number of speeds 21 tool taper ISO 40 quill stroke 90 mm feed speeds 2-3000 mm/min rapid traverse longitudinal and cross 6000 m/min rapid traverse Z-axis 5000 m/min distance spindle nose and table 450 mm table travel 495 mm table surface area vertikal 300 x 450 mm fixed clamping table 460 x 800 mm max. loading 350 kp dimensions ca. 3150 x 1800 x 2125 mm weight - pallet system ca. 2380 kg weight of the machine ca. 2,4 t incl. variois tool holders SK 40 Ksdpjxv D U Ijfx Ad Newt manual included

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Kwodpfsxyk Upex Ad Nst

Condition: good (used), Manufacturer: WMW VEB Tip: FW 200×630 x-y-z: 380 - 140 - 230 mm. Kjdpfx Aeik Hcujd Njwt Table size: 200x630mm

Condition: used, Vertical milling machine CINCINNATI 2 MI Travel X: 700 mm Travel Y: 250 mm Travel Z: 330 mm Spindle: SA 50 Spindle speed: from 25 to 1500 RPM Table size: 1380 x 250 mm Slide spindle travel 100 mm Motor 5 CV Feeds auto X - Y Manual head descent (auto not working) Voltage: 380 V Width: 1800 mm Kwodoxxqnajpfx Ad Njt Depth: 1800 mm Total height: 2000 mm Weight: approx 2,5 T

Condition: used, Vertical Milling Machine Droop & Rein type FS130 Travel X: 2000 mm Travel Y: 1000 mm Travel Z: 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation: from 31,5 to 1600 RPM Table size: 2400 x 1070 mm Kedpfx Adjxxl Hds Newt Throat depth: 950 mm Tilt head Spindle motor: 22 kW Scale HEIDENHAIN 3 axes Year of construction: 1976 New electrical panel in 2006 Voltage : 380 V Width : 3500 mm Depth : 4700 mm Total height : 4500 mm Weight : 26 T

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Kwedpfxsxxlr To Ad Not Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight: approx 9 T

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm Ksdpfxexxkkbe Ad Newt

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Kwodpfxexr A Eds Ad Nst Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 600 mm z-travel 500 mm table surface area 1000 x 560 mm spindle taper HSK 63 A spindle turning speed - stepless 20 - 16.000 U/min spindle power 15 kW max. torque on the spindle 9 Nm feeds x/y/z -stepless 1 - 30.000 mm/min rapid traverse 35 m/min feed power 8000 N ATC 30 Stationen control HEIDENHAIN, TNC 430 total power requirement 32 kVA weight of the machine ca. 7,2 t Kwsdpfx Asxq Hf Sjd Njt dimensions of machine L x W x H 2,75 x 2,30 x 2,95 m Accessories: HEIDENHAIN probe TS 632, various tool fixtures, chip conveyor, coolant

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: Kwedpjxp Rywjfx Ad Net - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: repair required (used), functionality: not functional, Vertical milling machine Kwodpfxoumlvus Ad Njt

Year of construction: 1983, condition: good (used), Machine number: 316204/22 Type / Model: FSS 315/E Travel x-y-z: 850 - 280 - 355 mm table: 1.200 x 370 mm clamping surface: 1.060 x 260 mm Speed range: 28 to 1,400 rpm spindle mount: SK 50 quill stroke: 80 mm Feed rates x and y axis 16 to 800 mm/min feed z-axis: 5 to 250 mm/min Connection: 8 kW Kedpfx Adjfli Afj Nowt Accessories/equipment: Swivel head; condition: good Weight: 4 t Dimensions: 2.000 x 2.000 x 2.400 mm

Condition: used, Year of construction: 2008, travel -x axis 1.100 mm travel -y axis 610 mm Kwsdpjvzcnnjfx Ad Net travel -z axis 610 mm table dimension (L x W) 1.250 x 610 mm tool adaptor SK40 numbers of positions in the tool changer 30 table diameter 250 mm control HEIDENHAIN - iTNC 530 Milling machining centers - vertical | MTcut - V 110 T with NC swivel rotary table (TT251HEE08) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW Ksdpfx Adexg R Ezs Nowt weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: used, Year of construction: 1998, x-travel 480 mm y-travel 360 mm z-travel 270 mm Control Brother turning speed range - main spindle 6 - 6.000 min/-1 drive capacity - main spindle 5 / 7 kW tool taper SK 30 table surface area 600 x 300 mm rapid traverse ( x / y / z ) 36 / 36 / 30 m/min number of tool places 14 Pos. The machine is defective and is being sold as a spare parts carrier. The extraction system is NOT included in the scope of delivery. Ksdpfx Adexddvhs Newt Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Condition: used, Year of construction: 1996, x-travel 700 mm y-travel 320 mm z-travel 270 mm turning speed range - main spindle 10 - 10.000 min/-1 drive capacity - main spindle 5 kW tool taper ISO 30 / MAS-BT Kjdpfsxddvbox Ad Nowt table surface area 800 x 300 mm table load capacity 300 kg distance spindle /table 450 mm rapid traverse ( x / y / z ) 30 m/min Feed ( x / y / z) 5 - 10.000 mm/min number of tool places 14 Pos. tool diameter 80 mm tool length - max. 200 mm weight of tools max. 3 (gesamt 25) kg Overall size 1830 x 2950 x 2410 mm total power requirement 9 kVA The machine is defective and is being sold as a spare parts carrier. The extraction system is NOT included in the scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Kwedpfx Adowbi Rbo Nst Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: used, Vertical milling head, milling head, angle milling head WMW HECKERT Year of manufacture: approx. 1985 Tool holder: SK 40 Quill stroke: approx. 85 mm Centre diameter at the flange plate: 200 mm Kedpfx Adjxcbp Ae Newt Bolt circle diameter at the flange plate: Ø 175 mm Mounting threads at the flange plate: 4x M16 - Head drive with splined shaft - SK40 adapter for head drive via splined shaft - Degree scale on the angle milling head 2x 90° - Draw bolt for tool holder with M16 - Solid intermediate flange for adapting to a WMW FW 250x1000 milling machine Dimensions L x W x H: 530 x 380 x 240 mm Total weight: 95 kg In good condition

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Ksdpfoxk Tzgsx Ad Njwt

Year of construction: 1972, condition: excellent (used), machine/vehicle number: 2995, table mounting size: 300 x 1100 mm movement x: 780 mm movement y: 250 mm Kwsdoh I Du Ujpfx Ad Nst movement z: 410 mm spindle taper: SK 40 tailstock stroke: 100 mm spindle turning speed range: 31,5 - 1400 rpm carriages longitudinal and cross: 12,5 - 630 mm/min carriages vertical: 6,3 - 315 mm/min electrical connection: 380 V, 5,5 kW space needed: 1770 x 1500 x 2050 mm weight: ca. 2200 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 8,052 h, functionality: fully functional, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,345 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed length X-axis: 1,875 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 1,345 mm, feed rate X-axis: 24,000 m/min, feed rate Y-axis: 24,000 m/min, feed rate Z-axis: 24,000 m/min, torque: 3,430 Nm, workpiece weight (max.): 4,000 kg, total height: 4,950 mm, total length: 7,029 mm, total width: 5,200 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 51,200 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 500 rpm, distance table center to spindle nose: 1,600 mm, spindle motor power: 37,000 W, spindle nose: A2-11, tool length: 300 mm, type of input current: AC, turning diameter: 1,450 mm, turning diameter over cross slide: 1,250 mm, spindle diameter: 160 mm, bar passage: 160 mm, chuck outer diameter: 500 mm, collet bore: 160 mm, feed force X-axis: 20,000 N, feed force Y-axis: 20,000 N, feed force Z-axis: 25,000 N, milling spindle length: 300 mm, quill diameter: 160 mm, quill stroke: 250 mm, quill travel distance: 250 mm, spindle bore: 160 mm, swing diameter over bed slide: 1,450 mm, swing diameter over cross slide: 1,250 mm, swing diameter over top slide: 1,100 mm, turning diameter over bed slide: 1,300 mm, turning length: 1,600 mm, Equipment: chip conveyor, documentation/manual, For sale: Mazak Integrex e-1250 V/8 mill-turn center complete with extensive accessories and a Mazak Palletech High Rise (800B) automation system. The system combines milling, turning, and automated pallet handling – ideal for complex workpieces in a single setup. _____ Technical Specifications – Integrex e-1250 V/8 • Travel: X = 1,875 mm, Y = 1,250 mm, Z = 1,345 mm • Rotary table: Ø 800 mm, 500 rpm • Tool magazine: 120 positions (CAPTO) • Control: Mazak SmoothX with 5-axis functionality • Operations: Milling, turning, drilling, tapping, 5-axis simultaneous machining • Coolant system: High-pressure system up to 70 bar, Mayfran belt filter system, oil separator, coolant guns • Accessories: Tool Eye, Renishaw touch probe, HD camera system, overload monitoring _____ Software & Control Package • Synchronous tapping (G84.2 / G84.3) • Engraving and re-cutting functions • Cylindrical & polar interpolation (EIA) Kwsdoxgu E Espfx Ad Net • Tool length & radius compensation (5-axis) • Fine spline interpolation (EIA) • Mazatrol turning/milling function • MT Connect adapter for networking _____ Automation – Palletech High Rise (800B) • Pallet transport system (mixed type) • Expandable high-bay racking solution for flexible manufacturing • Ideal for both series and mixed production • Note: Pallets to be procured separately _____ Special Features • Complete documentation (digital & print) • Full package: machine + automation + accessories _____ Your Advantage • “Done in One®” concept: all machining in a single setup • Productivity: 5-axis machining + turning + pallet automation • Flexibility: From single parts to series production • Efficiency: Automatic pallet change & integrated measurement technology 📍 Location: Southern Germany 👉 Price and delivery terms upon request

Condition: new, Year of construction: 2022, Bavelloni VDM1636 series vertical milling and drilling machine. + additional options : - pre-setting of drill bits , whetting , - Barcode reader , - additional Camnay office software. Kwsdstui R Dopfx Ad Not VDM 1636 CN is an NC vertical milling and drilling machine designed to automatically perform complex drilling and milling cycles. Equipped with one double drilling head (1 + 1 opposite spindles), each equipped with a rotary storage tool (8 positions each). The machine, characterized by great ease of operation, has been designed in accordance with the most advanced technical solutions to ensure extremely high accuracy in work. The dual rotary tool storage with 8 positions allows drilling, countersinking and milling at a single workstation. Easy to use, fast and precise in execution thanks to the technological solutions used: 5.5 kW spindles, spindle movements with ball guides, latest generation NC brushless motors with easy and intuitive software Possible work In one automatic cycle, the VDM 1636 CN can process the following operations: - Drilling - Countersinking - Milling - Cutting out Holes can be made at any point on the glass surface. The new control console used in the VDM1636 milling and drilling machine combines all the advantages of numerical control. This interface can work in a network with other machines . It can also be connected to the BAVELLONI network, so that the manufacturer's remote service is possible. The main features of this system are: - Programming while the program controls the movements of the machine, the operator can easily work on the computer. - Simple and direct graphical interface. - Data transfer via commercially available tools . VDM 1636 CN is equipped with one of the most advanced software systems (CAD / CAM) specifically designed for glass processing by numerically controlled machining centers is unique in performance, reliability and ease of use, thanks to the use of state-of-the-art technical solutions

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Ksdpfx Aek It Uted Njwt