Used Vertical Milling for sale (14,913)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The previous owner of the machine was a well-established Formula 1 team from Central Europe! The milling head has been recently inspected by the machine manufacturer, is partially overhauled, and is fully functional. The machine has always been covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis swivel milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area cover Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Hsdpfxozcqnce Aahjp Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Hedpfxozdrzxo Aahop Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 5014 BP, functionality: fully functional, cutting height (max.): 1,600 mm, saw blade diameter: 250 mm, empty load weight: 500 kg, cutting depth: 55 mm, No minimum price – guaranteed sale to the highest bidder! Hodpfxezdzy Ro Aahsp TECHNICAL DETAILS Max. cutting height, vertical: 1,600 mm Max. cutting height, horizontal: 1,550 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Arbor hole saw blade diameter: 30 mm MACHINE DETAILS Voltage: 400 V Current consumption: 6.6 A Fuse: 16 A Power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,200 x 2,450 mm Weight: 500 kg Transport packages: 1 EQUIPMENT Horizontal cutting Vertical cutting

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,200 mm, table width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISO 50 Travel X-axis: 1,250 mm Travel Y-axis: 1,100 mm Travel Z-axis: 950 mm Travel W-axis: 630 mm Table size: 1,120 x 1,000 mm Table load capacity: 3,000 kg Hedpfszd Avyex Aahop

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,316 h, functionality: fully functional, machine/vehicle number: 11080297, travel distance X-axis: 1,100 mm, travel distance Y-axis: 585 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 585 mm Travel range, Z-axis: 600 mm Spindle speed (max.): 8,000 rpm Hodpfx Aaezd Aigjhep Spindle type: SK 40 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Input voltage: 400 V Total weight: 7,000 kg Operating hours (according to image) Control system operating hours: 42,480 h Machine operating hours: 38,123 h Spindle operating hours: 12,316 h EQUIPMENT Documentation/Manual Chip conveyor Electronic handwheel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC 530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Maximum speed: 8,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain ITNC 530 Spindle operating hours: 14,000 h Coolant supply: 20 bar Input voltage: 29 V Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,000 mm Total weight: 15,000 kg EQUIPMENT Documentation/Manual Speed adjustable in steps Chip conveyor Coolant filtration system Hedpfx Aezhn Aysahop Swinging operation, mountable wall Handwheel Measuring probe Tool changer

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 05 17 1994, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller model: Heidenhain TNC 415, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS Travel range X-axis: 2,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,250 mm B-axis: 360° Table size: 1,600 x 1,800 mm MACHINE DETAILS Hedpfxszha Ine Aahep Control system: Heidenhain TNC 415 Tool holder: SK 50 ATC: 60 Note: Angles are not included in the scope of delivery. The machine has already been disassembled.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain TNC 426 C, No minimum price – guaranteed sale to the highest bidder! Loading can be carried out by the seller for €750! TECHNICAL DETAILS Travel in X-axis: 4,000 mm Travel in Y-axis: 1,200 mm Travel in Z-axis: 2,000 mm Spindle type: ISO 50 Spindle power: 50 kW Spindle speed: up to 3,000 rpm Hodpfszdtxfsx Aahep Table length: 5,000 mm Tool changer: 30-position ATC MACHINE DETAILS Control system: Heidenhain TNC 426 C Headstock Swiveling: Automatic Increment: 1 degree / 2.5 degrees / stepless Dimensions & Weight Dimensions (L x W x H): 9,000 mm x 5,000 mm x 5,000 mm Weight: 35,000 kg EQUIPMENT Hydrostatic guideways in all axes Tool holders Coolant preparation/filtration system Chip conveyor Cooling system, manufacturer: Deerosdassi Control cabinet system Note: The machine has already been professionally disassembled and is in storage.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Hsdpfx Aszdttpsahsp Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 EQUIPMENT Tool changer

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Hsdpfx Aszd Rizsahep Drive power: 11 kW Drive power with overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units – Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units – Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Hodezf Ibdjpfx Aahjp Milling spindles – Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles – Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Routing units Number of routing units: 2 Routing units – Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Routing units – Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode reader (manufacturer: SICK) CE marking Protective grid Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling heads: 1 Tilting spindle Hedpszf H R Refx Aahjp The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hodezf H Nyopfx Aahop Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8578

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Hsdpfx Ajzf H Iieahjp Motor power: 5 kW EQUIPMENT Tilting spindle Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Hodpszf H Ezjfx Aahep Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F3S171901, table width: 180 mm, table length: 600 mm, coolant tank capacity: 30 l, pump capacity: 15 l/min, TECHNICAL DETAILS Clamping table dimensions: 600 x 180 mm Tool holder: SK30 Drawbar: M12 x 220 mm T-slots: similar to DIN 650 MACHINE DETAILS Hsdpfxozhm Afs Aahsp Coolant tank: 30 l Delivery rate: 15 l/min Saddle adjustment: handwheels Spindle drive: 2-pole motor via multi-ribbed belt EQUIPMENT Arbor clamping Cooling system with 30-liter tank Coolant tank with quick-release fastener Control panel Work light Coolant hose CE marking

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,831 h, functionality: fully functional, machine/vehicle number: 15465588584, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller model: Heidenhain iTNC 530 HSCI, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 375 mm B-axis: -5 to +110 degrees C-axis: 360 degrees Table dimensions: 450 x 400 mm Maximum workpiece weight: 250 kg Spindle speed: 18,000 rpm Tool interface: HSK-A63 Number of tool positions: 60 Rapid traverse rate: 80 m/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Machine weight (approx.): 7,150 kg Operating hours Spindle hours: 23,831 h Power-on hours: 57,330 h EQUIPMENT Band filter system NC rotary table Handwheel FS Coolant gun Tool measurement system Hedpfx Aaszgt U Ejhjp Chip conveyor Rotoclear viewing window Temperature monitoring

Condition: ready for operation (used), Year of construction: 2010, operating hours: 10,106 h, functionality: fully functional, machine/vehicle number: 107.86.00.246, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 500 mm Hedjzgt Ulepfx Aahep Spindle speed: 24,000 rpm Table dimensions: 900 x 630 mm Number of axes: 3 MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,550 x 2,900 mm Machine weight: 8,300 kg Connection: 400 V Operating hours Operating hours, control system: 58,372 h Operating hours, machine: 26,800 h Programmed hours: 10,106 h

Condition: good (used), Year of construction: 2015, Ref. -No.: 10652 Manufacturer: DMG MORI Type: NT 4300 DCG 1000 S Year of construction: 2015 Type of control: CNC Control: Fanuc F31iA5 Storage location: Halberstadt Country of origin: Japan Machine-No.: NT430XXXX Turning Length: 983 mm Spindle power: 18,5 / 11 kW Travel -X Axis: 750 mm Travel -Y Axis: +-210 mm Travel -Z Axis: 1220 mm Max. machining diameter: 660 mm Hedjzh Hl Tspfx Aahep Number of tool stations: 100 pc Tool configuration: CAPTO C6 Tool holder: 70 pc Further information: - Control and Measurement Systems - Control computer: Fanuc F31iA5 - Tool measurement system: included - Included equipment - Internal tool cooling system + high-pressure pump - Conveyor belt - Controller - Foot switches for main and sub-spindles - Tool measurement arm - Machine manuals The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package * Hodpfx Aaowp D Nbohep

Condition: used, Technical details: faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 330 mm faceplate turning speed range: 1 - 92 U/min workpiece weight: 18 t feeds: 1 - 4000 mm/min main drive motor: 55 kW total power requirement: 85 kVA weight of the machine ca.: 64 t dimensions of the machine ca.: 90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor Hedpfsvb Dq Rjx Aahjp *

Condition: used, Technical details: faceplate diameter: 5000 mm swing diameter: 6100 mm Hsdpfx Asw Rz U Asahop turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D *

Condition: as good as new (ex-display),

Condition: excellent (used), Year of construction: 2007, CNC control: Heidenhain TNC 124 Travel ranges: X-axis travel: 620 mm Y-axis travel: 420 mm Z-axis travel: 400 mm Main spindle speed range: 50 - 4000 rpm Gear stages: 2 Main spindle drive power: 6 kW Tool holder: ISO 40 Clamping force: 10 kN Spindle head: manually swiveling ±45° Max. tool diameter: 125 mm Max. tool weight: 6 kg Table clamping surface: 400 x 800 mm T-slots: 5 x 14 x 80 mm Max. table load: 400 kg Feed rate X / Y: 0 – 6000 mm/min Feed rate Z: 0 – 4000 mm/min Rapid traverse X / Y: 6000 mm/min Hjdpfxezh Effo Aahjp Rapid traverse Z: 4000 mm/min Total connected load: 10 kW Footprint L x W x H: 2850 x 3350 x 2000 mm Machine weight: 2100 kg

Condition: like new (used), Year of construction: 2022, operating hours: 3,000 h, FOR SALE HAAS EC-1600 Horizontal Machining Center Exceptional condition – Year 2022 – Available immediately This state-of-the-art machine is ideal for machining heavy and large parts. Commissioned in October 2022, it has been used very little and has been rigorously maintained according to the manufacturer's standards. Technical specifications: - Model: EC-1600 (Generation 10/2022) - Axis travels: X: 1,626 mm | Y: 1,270 mm | Z: 1,016 mm - Table dimensions: 1,626 mm x 914 mm - Maximum load capacity: 4,536 kg - Spindle: ISO 50 - Usage: 3,000 hours - Power supply: 440 V / 3 Phases / 50-60 Hz (35 Amps) Hodpfx Aaeyzb S Dehep €80,000 The equipment is ready for shipment. I am at your disposal for any further information or to coordinate the transport logistics. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT MACHINE TOOLS – ALL TYPES