Milling machining centers - vertical

DOOSAN DNM 750

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Guedpfxew D Ayne Angjh

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Gujdpfxezv Syfe Angoh Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Gjdpfx Ansqzhfxjgjuh Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large Guodpfxoy Tmlmj Angsh removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display - 12.000 RPM spindle 28 kW, 159,3 Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -tool load monitoring -tool breakage detection with needle -automatic doors -robot interface -4th axis preparation -HIWIN RCV-320 rotary table -HIWIN RTS-320 support -Hydraulic aggregate 200 bar 3 A+B -preparation for rotary table hydraulic 2x(3A+B) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Gjdpfxjy Sf Azo Angsuh Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Godpfx Anoyz S T Ssgouh

Condition: excellent (used), Year of construction: 2014, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Gsdpfozam E Ejx Angouh Removable handwheel

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Gedewtg Inspfx Angeuh Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Gsdszi Ra Rspfx Angouh Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Gedsy Hvp Ijpfx Angsuh