Used Vertical Internal Grinder for sale (16,863)

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW Fodpfst Hw T Sex Ab Togk weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: used, Technical details: honing diameter: 4-31 mm stroke: 350 mm throat: 250 mm Fgedpewx Shkofx Ab Tjk

Year of construction: 1999, condition: used, pulling force - max. 6,0 t max. ram stroke 1250 mm Fgedod Il A Njpfx Ab Tok dimensions of the machine ca. 1,20 x 1,20 x 3,25 m

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically very good condition tractive force: 16.000kg Fgjdpfx Abjlpadyo Tok clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 60305, General / technical data: Fsdpfx Ajiqkb Rjb Tsgk Manufacturer: Rausch Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against unintentional retraction of the drawbridge) - integrated coolant system with check valve and drain cock - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected.

Year of construction: 1964, condition: refurbished (used), machine/vehicle number: 2041, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 weight: 3,2 to broaching force: 8.000kg With switch plate ( 2 stations ) Fgsdpfegyd S Dox Ab Tsk Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1732, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Fgedpogyd Svefx Ab Tok weight: 3,2 to broaching force: 6.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1964, condition: good (used), functionality: fully functional, machine/vehicle number: 2016, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 16,000 kg clearing length: 1.250 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 2,200 x 1,550 x 4,200 (without pit) Power supply / connected load: 380Volt 50 HZ Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and hydraulically mechanical in the feeder. The machine has been electrically (PLC Siemens S7) and mechanically modernized in 2004. The machine has an integrated coolant system. Fedpjt Dv I Asfx Ab Tjgk Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: excellent (used), Double bench grinder Fgodpfek Iwx Esx Ab Tok

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder Fedoxdh Hqspfx Ab Tsgk • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: ready for operation (used), Year of construction: 2010, Grinder Sydelmann AU-200 For fresh and frozen meat Fodpfox A Alxox Ab Togk Ready to work and delivery

Condition: excellent (used), functionality: fully functional, The MADO Grinder Model: MEW 620 is a heavy-duty, industrial meat wolf (grinder) designed for high-volume, reliable size reduction of meat, fish, and other food products. This model is engineered for continuous operation and easy maintenance. Performance & Throughput Capacity Output 1,400 kg/h High-Volume Grinding: As an industrial grinder, the MEW 620 is built for continuous, high-throughput processing, efficiently grinding large quantities of product. MADO Quality: MADO is a recognized brand in cutting and grinding technology, known for producing durable and reliable machines. Fgedpfx Aoxxtucsb Tsk Versatile Product Handling: Capable of processing various materials, including fresh, chilled, and sometimes tempered (partially frozen) meats, depending on the cutting set configuration. Operational Benefits Robust Construction: Constructed with stainless steel, ensuring longevity and resistance to corrosion. Hygienic Design: Designed with a focus on hygiene and easy cleaning, featuring accessible components and smooth surfaces for simple washdown. Safety: Includes visible safety features like an emergency stop button (visible in the image) for operator security. Industrial Application: Ideal for use ahead of stuffers in a full production line.

Condition: ready for operation (used), functionality: fully functional, overall weight: 600 kg, power: 30 kW (40.79 HP), protection type (IP code): IP55, Metso SRDS-7 vertical slurry / drainage pump system with Busck Electric motor. The unit is designed for continuous operation in pits, reservoirs or sump applications where abrasive slurry, slag, condensate or process water must be recirculated or discharged. The pump comes from an industrial facility in Elektrėnai (LT). It has been in operational use and is built for heavy-duty, long-term service in harsh environments. Technical Specifications Brand: Metso Minerals (Finland) Model: Metso Slurry Pumps (MHC / SRD series) Type: Vertical slurry / slag / drainage pump Construction: Heavy-duty vertical installation, works submerged in a reservoir or pit Application: Slag recycling, condensate recirculation, slurry pumping Motor Brand: Busck Electric (Denmark) Model: Y2-200L-4 Power: 30 kW Speed: 1470 rpm Enclosure: IP55 (dust & water protected) Efficiency class: EFF2 Insulation class: F Duty cycle: S1 (continuous) Voltage: 380–415 V Δ (Delta) 660–715 V Y (Star) Fodpfx Aboxy H Tbj Tjgk General Estimated total weight: ~600 kg Condition: Used, operational when removed Mounting: Heavy steel frame with vertical drive shaft Included Complete vertical pump assembly Busck 30 kW motor Steel support frame Belt drive guard (yellow) All seen components in photos

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Fgodpsxxbzwjfx Ab Tek Remote Electronic Handwheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79001 Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG Fgodpoxryafofx Ab Tjk • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening Fgjdoxpqm Repfx Ab Tjk

Condition: new, Year of construction: 2025, table width: 450 mm, table length: 900 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, number of spindles: 1, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Fsdpfexc I Dgox Ab Tegk Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: used, Vertical insulated tank 100m³ Diameter 3.85m Height 11.25m Fgodpfx Aboxl Th Nj Tok The tank is insulated with mineral wool It is lined with trapezoidal sheet metal It has space for a side agitator The tanks are dismantled, ready for loading.

Condition: good (used), We have 2 cutting mills for sale. The price refers to mill no. 2. The machines were used for cutting plastic but can also be used for processing other synthetic materials. Both are equipped with a liquid cooling system. Technical data (mill no. 1): -Dimensions: 150 × 115 cm / Height: 210 cm -Rotor diameter: 36 cm -Rotor/knife width: 55 cm -Number of knives: 3 (Fixed knives positioned at an angle, which reduces resistance during cutting and shredding, making the machine more efficient) -Inlet: 30 × 53 cm -Motor: 22 kW / 30 hp -Liquid cooling Technical data (mill no. 2): -Dimensions: 150 × 125 cm / Height: 180 cm -Rotor diameter: 25 cm -Rotor/blade width: 52 cm -Number of blades: 3 -Motor: 22 kW / 30 hp -Liquid cooling Prices: Mill no. 1 – €7200 Mill no. 2 – €5900 Fsdpfx Abouw Skhs Togk For both: €11,900 TAG: plastic grinder, shredder, plastic recycling, plastic cutting machine, industrial grinder, cutting blades, plastic milling machine, industrial machine, cooled grinder, recycling machine, crusher

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: electric, color: dark red, overall weight: 38,000 kg, axle configuration: 2 axles, brakes: other, Year of construction: 2025, Mobile vertical shaft crusher is a specially designed mobile stone crushing screening plant on a portable double axle chassis, consisting of feeder bunker, VSI 900 Vertical shaft impact crusher, vibrating screen and conveyor belts. It can be fed directly with the material in stream areas or it can produce sand and gravel from the sieve material in the crushing plants. The GNR - MVSI 900 Vertical Shaft Crusher that gives this facility its name; - Maximum feeding size 50-55 mm Fodpfewnp Akex Ab Tegk - Rotor size 900 mm - Engine power 2x200 kW - The capacity 80-210 tons per hour. For more information please call us.

Condition: new, functionality: fully functional, color: yellow, overall weight: 19,000 kg, Year of construction: 2025, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. VSI-1000 technical specifications: Model: VSI-1000 OR Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Fgedpfsxckf Hox Ab Tsk Speed: 50 – 70 ms Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates – Hydraulic opening cap – Automatic lubrication system

Condition: excellent (used), Velo Kieselgur filter vertical 10 m2 used in beverage industry, in very good condition. Complete with wiring and control desk. Fgedpfx Abeq U A Hus Tjk

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Fgsdpjb Umtkjfx Ab Tsk

Condition: like new (used), 30m3 insulated stainless steel tank Fodjhr Rp Sjpfx Ab Togk Dim. 3.40x 6.80. 12 cm insulation, insulated with wool and metal sheet lower bottom insulated with polyurethane foam. We offer transport with our own semi-trailer.

Condition: good (used), Vertical steel tank 60,000l diameter 2.82 m total height 11 m a hatch at the top of the upper floor and at the bottom on the side of the cylinder. Fgjdpfx Abotwwv No Tsk Each tank can be painted with epoxy resin coat, or sold sandblasted (no coat). 12 units available