Used Vertical Internal Grinder for sale (17,258)

Condition: good (used), Vertical steel tank 60,000l diameter 2.82 m Bedpstwwv Nefx Ahvjld total height 11 m a hatch at the top of the upper floor and at the bottom on the side of the cylinder. Each tank can be painted with epoxy resin coat, or sold sandblasted (no coat). 12 units available

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Bjdpfx Ajb Umtkjhveld

Year of construction: 1997, condition: repair required (used), Mortising machines Maka Db-6 v Second hand 1977 Make: Maka Model: Db-6 v Description: VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL Year: 1977 Blodefd Rxqjpfx Ahvjd

Condition: good (used), We have 2 cutting mills for sale. The price refers to mill no. 2. The machines were used for cutting plastic but can also be used for processing other synthetic materials. Both are equipped with a liquid cooling system. Technical data (mill no. 1): -Dimensions: 150 × 115 cm / Height: 210 cm -Rotor diameter: 36 cm -Rotor/knife width: 55 cm -Number of knives: 3 (Fixed knives positioned at an angle, which reduces resistance during cutting and shredding, making the machine more efficient) -Inlet: 30 × 53 cm -Motor: 22 kW / 30 hp -Liquid cooling Technical data (mill no. 2): -Dimensions: 150 × 125 cm / Height: 180 cm -Rotor diameter: 25 cm -Rotor/blade width: 52 cm -Number of blades: 3 Blsdpfx Ahjuw Skheved -Motor: 22 kW / 30 hp -Liquid cooling Prices: Mill no. 1 – €7200 Mill no. 2 – €5900 For both: €11,900 TAG: plastic grinder, shredder, plastic recycling, plastic cutting machine, industrial grinder, cutting blades, plastic milling machine, industrial machine, cooled grinder, recycling machine, crusher

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Bledpfxowwkk Ie Ahvsd Safety interlocked lid In good working order

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. Bledswnx H Espfx Ahved As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-H20140, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Table size: 760 mm x 510 mm System: SK40 Speed: 15,000 rpm MACHINE DETAILS Machine weight: 4,700 kg Control: Ultimax EQUIPMENT 24-position tool changer Internal coolant supply (IKZ) Chip conveyor Electronic handwheel Bedpfxjylk Eye Ahvold

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 23146001, The machine was acquired in 2024 and has seen very little use. The original price was €132,000 net. The technical data is sourced from the manufacturer's website. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Capacity up to: 150 m³/h Chipping disc: 1,450 mm (diameter) x 78 mm Disc speed: 700 rpm Number of cutting blades: 4 Bodoyg D Svspfx Ahvsld Number of counter blades: 4 Maximum chip length: 36 mm Feed speed: 0.7 m/s MACHINE DETAILS Control system: Greentec Control System 3.0 with touchscreen Three-point hitch: Standard Starting aid: Hydraulic Drive: PTO shaft 1000/1000E Required power: 200 – 450 HP Weight: 3,100 kg Speed: 1000 rpm Note: This machine is a special version without a hopper.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTC530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 2 x 750 mm Travel Y-axis: 500 mm Travel Z-axis: 600 mm Rapid traverse X / Y direction: 25 m/min Rapid traverse Z direction: 20 m/min Feed force: 9 kN Spindle speed range: 30-12,000 rpm Tool changer: 22-position Tool holder: SK40 Maximum tool length: 400 mm Maximum tool diameter: 85 mm (135 mm with adjacent stations empty) Tool change time: 4.0 s Clamping area: 2 x 1,350 mm x 500 mm Maximum table load per table: 550 kg MACHINE DETAILS Blodpfx Aoymz D Njhvod Control model: Heidenhain iTC530 Drive power: 30/20 kW Total power requirement: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6.0 x 3.5 x 3.5 m Machine weight: 10,000 kg EQUIPMENT Internal cooling Coolant system with paper band filter Documentation

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640 Nexus, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 410 mm Travel Z-axis: 510 mm Table dimensions: 900 mm x 410 mm Spindle speed: 12,000 rpm Tool holder: SK40 Bledpfx Aeymzmkshved Number of stations in tool changer: 30 Internal coolant supply: 15 bar MACHINE DETAILS Control: Mazatrol 640 Nexus Machine weight: 5,010 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 830 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rapid traverse: 30,000 mm/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Control: Heidenhain 530 (MC422) Weight: approx. 9,000 kg Bjdpfxoymn Saj Ahveld Spindle hours: approx. 17,500 EQUIPMENT Through-spindle coolant (IKZ) Chip conveyor Electronic handwheel Blum laser Flushing device Filtration system Note: The measuring probe is not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Bodpfx Aoymnykshveld Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller model: Fanuc 0iM, Equipment: chip conveyor, The machine was in use until it was decommissioned in 2024. The only known limitation is that the tool changer is not functional. The original purchase price of the machine was EUR 193,000! TECHNICAL DETAILS Blodpfx Ahjyma H Nevjd Travel X-axis: 650 mm Travel Y-axis: 765 mm Travel Z-axis: 520 mm MACHINE DETAILS Control: Fanuc 0iM Rated apparent power: 53 kVA Coolant supply: 20 bar Input voltage: 380 V Type of input current: Three-phase current Mains connection: AC 380 V, 3~, PE, 50/60 Hz Rated power: 53.3 kVA Interrupting capacity: 5 kA Full load current: 84.1 A Short-circuit capacity: 10 kA Weight: 12,500 kg EQUIPMENT Documentation/manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Taiwan Hartford VMC LG 1000 (Year 2012) Travels (X/Y/Z): 1000 mm / 510 mm / 630 mm Table Size: 1150 mm x 510 mm Max Table Load: 700 kg Spindle Speed: 10,000 rpm Spindle Taper: BT40 ATC Capacity: 24 Tools (Arm Type) Controller: Fanuc Blodpeyn Th Njfx Ahvjd

Condition: excellent (used), Year of construction: 2002, Control: Siemens SINUMERIK 840D, C200-4D Spindle speed: 6000 rpm Travel X/Y/Z: 280/280/145 mm Number of turrets: 1 with 6 positions Number of tool stations: 2x4 Blodpfx Ahoyp Icwjvsd Chip conveyor Pallet conveyor belt Pallets

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D Bledpfx Ajypwbijhvjd table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm Blsdeypwbcopfx Ahvod y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, Year of construction: 2026, 0550 mm Bedpfx Aex Urt Eohvsld 410 mm 480 mm 650x410 mm BBT 40 10.000 U/min Motor Capacity 7,5/11 kW max. table load 500 kg

Condition: new, Year of construction: 2026, 1100 mm 650 mm 610 mm 1200x6000 mm Bsdox Urtxepfx Ahveld BBT 40 12.000 U/min Motor Capacity 7,5/11 kW max. table load 1300 kg

Condition: used, Year of construction: 2004, total height: 1,500 mm, total length: 1,100 mm, total width: 1,100 mm, Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No Blodpfxsyplvno Ahvod - Serial number: 9010522 - Transport dimensions: 1100mm x 1100mm x 1500mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Max. turning diameter: approx. 1100 mm Faceplate turning diameter: 800 mm Maximum turning height over faceplate: 900 mm Max. table load: 2000 kg Maximum total cutting force at 700 mm diameter: 3400 kg 12 faceplate speeds: 12 - 200 rpm Number of feeds, horizontal and vertical: 8 Feed size, horizontal and vertical: 0.069 – 2.6 mm/rev Rapid traverse of slides: 2500 mm/min Drive power: 15 kW Dimensions (L x W x H): 2300 x 2100 x 2900 mm Weight: approx. 7,500 kg Accessories / Special features: • 2-axis digital readout (new in 2024) • 5-position star turret • Emergency stop switch • Chip guard for faceplate Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Bledpoxamgzsfx Ahved

Condition: like new (used), 1 unused universal vertical milling head suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 taper, quill stroke 100 mm, rated drive power approx. 3-4 kW, max. speed 2000 rpm, … Blsdpfxsddtwbo Ahved Special accessories: - Multiplicator, gear ratio 1:4, ISO 40 taper Price: 499.00 EUR - Attachment for automatic feed device for vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: 1,880.00 EUR - Horizontal milling head, auxiliary head for vertical milling head with ISO 30 spindle taper, swivels 360 degrees Price: 585.00 EUR Plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1999, With the AL100 U, you can notching workpieces from Ø 20 to Ø 76.1 mm. The cross support and the carriage with a swivel clamp are steplessly adjustable. This allows grinding of all pipe profiles at any desired angle from 30° to 90°. The AL100 U is capable of grinding square, rectangular, and round tubes of various wall thicknesses and is suitable for all common materials. The abrasive belt can be quickly tensioned, and the grinding rollers can be changed within seconds. Contact rollers are available in all standard sizes. Technical Data: Belt width: 100 mm Belt length: 2000 mm Belt speed: 30 m/sec Voltage: 400 V Motor speed: 2800 rpm Motor power: 3 kW Machine dimensions (L x W x H): 1350 x 600 x 1200 mm Weight: 136 kg Accessories / Special Features: • High-performance belt grinder with high belt speed • Robust three-phase motor • Low vibration Bjdoyplmtjpfx Ahveld • 3 grinding rollers for precise notching on tubes, profiles, and flat materials: o 1 contact roller with Ø 21.5 mm for 3/4" pipe o 1 contact roller with Ø 40.5 mm for 1 1/4" pipe o 1 contact roller with Ø 46.5 mm for 1 1/2" pipe • CE compliant Additional contact rollers available in all standard sizes. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FOR SALE Brother TC-22A Vertical CNC Machining Center: Manufacturer: Brother Model: TC-22A Type: 3-axis vertical CNC machining center (including optional 4th axis / rotary table) Travels: - X axis: approx. 500 mm - Y axis: approx. 400–410 mm - Z axis: approx. 410–610 mm (depending on version) Table: - Dimensions: approx. 650 mm x 400 mm - Max. table load: approx. 150–200 kg Spindle: - Taper: BT-30 or HSK40 (depending on configuration) - Max. speed: approx. 10,000–12,000 rpm - Motor power: up to approx. 11 kW Tool magazine (ATC): Bledjydpymspfx Ahvjd - 10 to 26 positions (depending on configuration) CNC Control: - Brother A00 or proprietary Brother CNC version Additional equipment: - Rotary table / 4th axis

Condition: used, Year of construction: 2011, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FOR SALE Victor VCenter 102E Machining Center – 2011 General description: Brand: Victor Model: VCenter 102E Year: 2011 Type: Vertical Machining Center / CNC Control: FANUC Oi-Mate MD Technical specifications: X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table size: 1200 × 510 mm Table load capacity: approx. 800–1000 kg (to be confirmed depending on version) Spindle type: 8000 to 10000 rpm (depending on configuration) Tool magazine: 20 to 24 positions (depending on version) Bsdpoyc Sxcefx Ahveld Equipment and features: CNC FANUC Oi-Mate MD – user-friendly interface for programming and automatic machining cycles Integrated lubrication and cooling system Chip extraction and filtration system Rigid cast iron structure for high precision Option to add probes or measuring devices Dimensions and weight: Machine dimensions: approx. 3.0 × 2.2 × 2.5 m (L × W × H) Weight: approx. 4500–5000 kg