Used Vertical Honing Machine for sale (65,851)

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. 12.000 rpm, SK 40 30 places in tool changer. 4.axis on table will come. Nlsdpfszkkczex Amyod

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 012000091398, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, controller manufacturer: Fanuc, table width: 405 mm, table length: 965 mm, rotary table diameter: 165 mm, overall weight: 4,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 11,000 W, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Fadal vertical machining center with a 4th axis. Used exclusively for aluminum, no roughing operations, and not for continuous operation. Primarily used for precision drilling of 4 mm holes and thread cutting in aluminum. The same applies to the rotary table for the 4th axis. Nsdpozl U Tysfx Amyold

Condition: good (used), Parts shown by hand not come. SK 40 ,30 tool places in tool changer. Nsdpjzki Rkjfx Amysld

Condition: used, Year of construction: 1995, Sunnen Eclipse EC-3500 CGM-27 Bore diameter – Honing range 1.5 – 165 mm Stroke length – Honing length 6 – 170 mm Nsdjzl U Evepfx Amyjld Spindle speeds: 200 – 3,000 RPM Stroke rates: 60 – 500 strokes Total power consumption – Spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1,200 kg

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 24,000 rpm, Control system: SIEMENS 840 D solutionline Operating hours: 12,400 h Spindle hours: 2,850 h Table surface: 840 x 420 mm Max. table load: 300 kg Tool holder: BBT 30 Tool magazine: 25 positions Chip-to-chip time: 1.7 s Nlsdpfezkimxjx Amyjd Chip conveyor Software package: - Job Shop - Siemens Mdynamics Approx. 20 tool holders with ER collet chucks (ER 20, ER 25, ER32) 1 analog edge probe Dimensions L x W x H: 2340 x 1650 x 2500 mm Weight: 4,100 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 22,001 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 2,050 mm, Travel distances: X-axis: 1800 mm Y-axis: 800 mm Z-axis: 600 mm Table size: 2050 x 750 mm Spindle speed: 0-8000 RPM Spindle hours: 6626 hrs Tool holder: SK40 Tool magazine: 30 positions Installation dimensions: approx. Width: 6500 mm Nsdpfx Aezl Uxpjmyeld Depth: 4400 mm Height: 4000 mm Weight: 12000 kg Machine hours: 22001 hrs Accessories: - Documentation

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Njdpfx Aszdklpsmyeld Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Njdpozdkhqsfx Amyold Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: used, Year of construction: 2001, nominal power (apparent): 30 kVA, controller manufacturer: SIEMENS, controller model: 810D, total height: 2,830 mm, total length: 2,200 mm, total width: 2,650 mm, overall weight: 7,500 kg, input voltage: 380 V, type of input current: three-phase, In this advertisement, we are offering two machines for sale: a used Quaser MV204II vertical machining center, manufactured in 2001, and a used DMC 103V, manufactured in 1988. Both machines are not fully functional! Quaser Model: MV204II Serial number: 120J430 Control: SIEMENS 810D Date of manufacture: February 2001 Gildemeister Model: DMC 103 V Serial number: 2886-0193 Initial inspection date: 29.06.1988 Operating hours: approx. 9200 If you have any questions or require further information, please do not hesitate to send us a message or call us. The price listed in this advertisement applies to both machines together; dismantling and transport are the responsibility of the buyer. Nodpjzl T H Sofx Amyeld

Condition: excellent (used), Year of construction: 2001, Technical specifications: 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Table diameter: 500 mm Table adjustable in degrees Nledpfxezl S Uzj Amyjd Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Additional equipment: Chip conveyor Various tools Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1998, x-travel 1050 mm y-travel 510 mm z-travel 560 mm control Matzatrol type M Plus table surface area 1300x550 mm 1,5 t workpiece weight max. 1500 kg Tool changer . turning speeds . U/min weight of the machine ca. 8,9 t dimensions of the machine ca. . m Workpiece width: Max. 550 mm Nedpezdca Tjfx Amyold Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2000, functionality: fully functional, Mazak VTC 200 B, Year of manufacture: 2000, Control system: Mazak Mazatrol 640, Travel range X/Y/Z: 1120/510/510 mm, Table size: 1460 x 510 mm, Table load capacity: 800 kg, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 10,000 rpm, Coolant pressure: 15 bar, Prepared for 4th axis, Nodpszl R A Djfx Amysld 4th axis defective, Performance Package.

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: Njdpfx Amezkbr Tjyeld 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Nlsdpfeh Ek H Sjx Amyed Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 820 mm, controller model: Siemens 840 D, table load: 4,200 kg, spindle speed (max.): 18,000 rpm, Submitting a bid obligates you to collect the machine by July 27, 2026! TECHNICAL DETAILS Travel range X-axis: 3,600 mm Travel range Y-axis: 900 mm Travel range Z-axis: 820 mm B-axis: -100 to +100 degrees Spindle speed max.: 18,000 rpm Taper: HSK-A63 Power: 0.8 - 25 kW Tool magazine: 30 positions Tool weight max.: 6 kg Tool length max.: 250 mm Tool diameter max.: 100 mm Tool diameter with empty adjacent position max.: 130 mm Total weight of all tools max.: 180 kg Rapid traverse (X-axis): 100 m/min Rapid traverse Y/Z-axis: 60 m/min Feed rate X/Y/Z max.: 20,000 mm/min Table size: 4,200 x 900 mm Table load: 4,200 kg T-slots: 9, center distance 100 mm MACHINE DETAILS Control system: Siemens 840 D Total power requirement: 92 kW Dimensions & Weight Machine dimensions: 4.6 x 8.7 x 3.3 m Machine weight: 30 t Nledpfx Amjzkapkeyod Operating hours (according to the latest service report) Power-on hours: 71,371 h Spindle hours: 22,527 h Number of shifts: 2 EQUIPMENT NC swivel milling head (B-axis) Linear drive in the X-axis

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,690 mm, total length: 2,830 mm, total width: 2,340 mm, table width: 1,150 mm, table length: 580 mm, table load: 900 kg, overall weight: 4,100 kg, spindle speed (max.): 8,000 rpm, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, Additional options & accessories: - 30-position tool magazine (standard: 22 positions) - Internal spindle cooling. - Original documentation from Bridgeport and Heidenhain. Nodpfxjzi Spyo Amyeld Weight & dimensions: approx. 4,100 kg approx. 2830x2340x2690 mm (LxWxH)

Year of construction: 2003, condition: ready for operation (used), A vertical CNC lathe by Emag is available. Workpiece length range: 22mm-100mm, turning length: 100mm, speed: 6500rpm, measuring length: 94mm, max. swing diameter: 220mm, tool stations: 12, weight: approx. 7000kg. Including tool setting probe, carousel workpiece transfer system, chip conveyor and coolant system. Documentation available. An on-site inspection is possible. Nodozl Emqepfx Amyjld

Year of construction: 2004, condition: ready for operation (used), A vertical EMAG CNC turning machine with automation is available. Speed: 6500rpm, workpiece length range: 22mm-100mm, turning length: 100mm, measuring length: 94mm, max. swing diameter: 220mm, max. pump pressure: 120bar, tool stations: 12, loading stations: 2, robot type: M-10iA, control: Fanuc 16i-TB, weight: approx. 10000kg, power-on hours: 84847h. Including high-pressure pump, tool setting probe, chip conveyor, coolant system, workpiece shuttle system and robot automation. Documentation available. An on-site inspection is possible. Njdpfjzl Enbox Amyeld

Year of construction: 2010, condition: ready for operation (used), A vertical CNC lathe Emag is available. Speed: 4500rpm, Tool stations: 12, Travel X/Z: 570mm/200mm, Max. chuck diameter: 260mm, Max. turning diameter: 260mm, Max. machining diameter: 220mm, Max. workpiece length: 110mm, Rapid traverse X: 60m/min, Rapid traverse Z: 30m/min, Feed force: 5.5kN, Max. workpiece weight: 120kg, Weight: approx. 6500kg, Control: Siemens Sinumerik 840. Documentation available. An on-site inspection is possible. Nedezl Em Depfx Amyjld

Year of construction: 2004, condition: ready for operation (used), A vertical EMAG CNC lathe is available. Workpiece length range: 22mm-100mm, turning length: 100mm, max. swing diameter: 220mm, tool stations: 12, measuring length: 94mm, spindle speed: 6500rpm. Machine dimensions X/Y/Z: approx. 2400mm/3300mm/2950mm, weight: approx. 10000kg. Including tool setting probe, chip conveyor, 120bar high-pressure pump, Heilig workpiece shuttle system with two stations and coolant system. Documentation available. An on-site inspection is possible. Nljdszl El Tspfx Amyed

Year of construction: 2004, condition: ready for operation (used), A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 42668h/42411h, Feed/Machining time 1/2: 29058h/27736h, Automatic operation hours 1/2: 10354h/12404h. Both machines are equipped with chip conveyors, 2 tool turrets, 2 loading stations, a workpiece palletizing system, robot automation and cooling. Documentation available. An on-site inspection is possible. Nsdpfxozl Emko Amyeld

Year of construction: 2004, condition: ready for operation (used), A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z-axis travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 51170h/53006h, Feed/Machining time 1/2: 33418h/30961h, Automatic operation hours 1/2: 14858h/14709h. Both machines are equipped with chip conveyors, 2x tool turrets, 2x loading stations, a workpiece palletizing system, robot automation and coolant system. Documentation available. An on-site inspection is possible. Nledpozl Emdofx Amyod

Condition: used, Year of construction: 1996, Technical details: x-travel: 2500 mm y-travel: 560 mm z-travel: 600 mm control: TNC 426 CA bore capacity in steel (diameter): 400 cm³/min Max. Milling-capacity: 400 cm³/min tool changer with: 34 Plätze Tool pull-in force: 12 kN spindle taper MT: SK 40 spindle throat: 580 mm Revolution per minute: 20...7500 steples U/min. max. torque on the spindle: 210 Nm distance spindle nose and table: 0 - 600 mm Njdpfx Amjvad Hpjyeld feed:: X/Y/Z = 1 - 24.000 steples mm/min. rapid traverse:: X/Y/Z = 24 steples m/min feed power: X/Y = 6 kN und Z = 8 kN kN table-size: 3300 x 500 mm table load capacity - central/maximum: 2500 kp interface: ja total power requirement: ca. 43 kW Weight approx.: 14,4 t dimension machine approx.LxWxH: 3,05 x 5,6 x 3,0 m dimension swarf conveyor LxWxH: 6.6 x 0,6 x 1,3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design. with integrated coolant supply link belt chip conveyor MAN+HUMMEL with cooling water tank and pump cooling lubricant treatment ALLWEILER AG, size L:1550 x W: 1000 x H:1200mm; filter belt width 500mm; pressure 30bar Hydraulic unit Machining area can be partitioned, partition wall available *

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 700 mm, Vertical machining center Manufacturer: Hermle Type: C 50 U Machine No.: 19670 Year of manufacture: 2009 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1000 mm Y: 1100 mm Z: 700 mm Tool changer: 60 positions + 41 (HSK 63) Spindle speed: 18,000 rpm Weight approx.: 21,500 kg - NC rotary table Ø 1150x900 mm - Chip conveyor - Compressed air supply through spindle center - Automatic enclosure roof - Electrical thermal compensation ITNC Nljdpfx Ajzl Ahlemyed - IKZ 80 bar paper band filter - Heidenhain measuring probe - Blum tool breakage detection/measurement Milling spindle replaced after 1900 operating hours, new Y-axis replaced after 1900 operating hours, new Subject to errors and prior sale.

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Nljdozly Tlspfx Amyed Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm