Vertical machining center

Röders Tec RXP 601 DSH

Condition: like new (used), Year of construction: 2023, operating hours: 2,983 h, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: RMS6, spindle speed (max.): 24,000 rpm, spindle nose: HSK63A, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Röders RXP601 DSH incl. Automation RCE2 X-axis: 540 mm Y-axis: 635 mm Z-axis: 400 mm Clearance table/spindle: 485 mm Lhodpfx Apjy Ez Utovsg Spindle: HSK63A, 24,000 rpm MHT medium distributor incl. holders and nozzle bodies included Compressed air through spindle Machine table: Erowa UPC 320x320 Tool changer: 64 positions Preparation for emulsion cooling and high-pressure coolant (IKZ) Options package: - Thermo package for maximum precision - Spindle compensation - Blum measuring laser for tool measurement - Handbox with display - Workpiece cleaning with compressed air - Tool cleaning with spray medium - Automatic machine calibration for maximum precision even with fluctuating temperatures - UPS for machine control - Remote maintenance - 3D measuring probe, automatically thermostable cone - Oil mist extraction with mechanical filter - Emulsion machining, preparation for high-pressure 40 bar pressure stages - Medium distributor: 1 medium/3 delivery rates - Medium distributor operation with MV2 - Front machine door as automatic lift door - Chuck control, dual pneumatic - Job manager RMSMain - Stainless steel internal cover - 3D machine model Automation RCE2: 10-position pallet changer for Erowa UPC pallets with max. dimensions 340x340 mm Maximum load per pallet: 300 kg

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Lhodoxdalfjpfx Apveg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow Lhsdpox D Dx Aefx Apvog • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Year of construction: 2016, condition: excellent (used), 1 used short bar loader make Breuning Lhedpfx Apeht Rl Ejvsg type ILS RBL 80/12 Year 2016 clamping range 5-80 mm diameter Length 100-1200 mm

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Lsdsyit Ulepfx Apvjhg

Condition: excellent (used), Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm Control MillPlus HEIDENHAIN table dimension - longitudinal 1000 mm table dimension - cross 600 mm spindle turning speed range 12000 U/min Number of axles 4 St. rapid traverse 30 m/min tool change unit 24 -fach Ledpfx Asvwgp Uepvehg weight of the machine ca. 9 t The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe

Year of construction: 2015, condition: refurbished (used), DCB Half gantry crane consisting of: 2 pcs 16 ton hoists. 2 support legs. The following accessories are included: 1 remote control with charger. 2 pcs weight display. Max hoist height: 12,4 meters. Lifting speed: 0.11-5.6. Classification: M5. Range: 21,792. Dimension crane guide rail: 80x60. Functional. In operation until week 12 2021. Dismantled week 12 2021. All annual inspections complied. The following accessories are included: crane folder with original documents, service reports, overview of ongoing maintenance. The following accessories are not included: Running rails + power rails. Master data Model and type 2x16 T MAX 22 T Chassis No. Unknown Year Estimated 2015 Lhedpfxjhk I H Do Apvsg Max load KG 2x16 T MAX 22 T Weight KG 20,640 excl. legs. Transport can be arranged. Call or write to make an appointment for viewing. Client sale, Location: DK-7600 Struer.

Condition: used, TECHNICAL DETAILS - Bar diameter : Ø 5 à 80 [mm] - Bar length : 250 à 1615 mm [mm] - Supply voltage : 400 [V] Lhsdpfjv R Hw Sox Apveg - Machine weight : 500 [kg]

Year of construction: 2005, condition: ready for operation (used), Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible. Lhsdpfx Apowt Tk Nsvog

Condition: reconditioned (used), Year of construction: 2014, operating hours: 9,132 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 3,700 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 32 m/min, overall weight: 1,750 kg, bar passage: 20 mm, Equipment: documentation/manual, Swiss-type CNC Lathe TSUGAMI B0206E-II TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate X1 axis: 24000 [mm/min] Rapid traverse rate X2 axis: 24000 [mm/min] Rapid traverse rate Z1 axis: 32000 [mm/min] Rapid traverse rate Z2 axis: 32000 [mm/min] Rapid traverse rate Y1 axis: 15000 [mm/min] Rapid traverse rate Y2 axis:15000 [mm/min] Max. bar diameter: 20 [mm] Min. spindle speed: 200 [rpm] Max. spindle speed: 10000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 3.7 [kW] Min. counter spindle spindle speed: 200 [rpm] Max. counter spindle speed: 12000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 2.2 [kW] Number of positions end attachment: 8 Number of positions guide bush holder 1: 5 Number of motorized positions guide bush holder 1: 3 Live tools speed guide bush holder 1: 8000 [rpm] Number of positions secondary operation: 8 Number of motorized positions secondary operation: 4 Live tools speed secondary operation: 8000 [rpm] Max. tool holder cross-section: 12 x 12 [mm] Working hours: 9132 [h] Weight: 1750 [Kg] INCLUDED EQUIPMENT: x1 sliding headstock (direct drive) x1 counter spindle (direct drive) x1 rotary guide bush (direct drive) x108 collets Ljdpfxoy Eff Ao Apvjhg x7 live tool holders x1 parts catcher x1 parts conveyor belt x1 parts ejection device x1 chip conveyor x1 coolant tank x1 oil mist extraction unit, 3nine LINA type x1 IEMCA ELITE 220 E / 32 XL bar feeder x1 set of accessories for IEMCA ELITE 220 E / 32 XL bar feeder x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical transformer x1 3-color status light x1 set of IEMCA manuals x1 set of FANUC manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Citizen, Nomura, Tornos, Miyano, Index, Traub, and Star lathes, as well as machining centers, milling machines, and grinding machines.