Used Venture Distributor for sale (406)

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Dsdpfx Aiezvn Thoijcp Please feel free to contact us if you have any questions. The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tool In top condition Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-System milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25 mm, HSK and milling cutter set easiest operation with the highest level of comfort thanks to the roller clamping system, no clamping or securing required, mounted on a stable base or on a workbench, 1 hook wrench for HSK63F collet 462E, 1 extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 counter pressure device from above Dcjdozu A D Eepfx Aiisp 1 tool for vertical Lamello P-System milling Machine in very good condition including many drills and tools Machine can be inspected and demonstrated at our showroom. Location: in stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture FV - Flexible and precise vision measurement system in three variants The Baty Venture FV is a state-of-the-art vision measuring system developed for the fast and precise inspection of complex workpieces. It provides optical measurements that enable comprehensive detection of the workpiece geometry. This system is particularly suitable for the manufacturing industry, which demands both speed and precision in quality control. The Venture FV is available in three different versions to cover different measurement requirements: Dcjdpfeuyig Sjx Aiiop Available models: Baty Venture FV1080 With a measuring range of 100 mm x 80 mm, this compact version is ideal for smaller workpieces. It offers fast and precise inspection and is perfect for applications where both optical and tactile measurements are required. Baty Venture FV2020 This variant has a measuring range of 200 mm x 200 mm and is suitable for medium-sized workpieces. The CNC control in combination with the Fusion 3D software enables fully automatic measurements, which increases efficiency and precision during inspection. Baty Venture FV3020 With a larger measuring range of 300 mm x 200 mm, the FV3020 is the largest variant available. It is particularly suitable for the inspection of complex workpieces where high precision and detailed measurements are required. Common functions: CNC control: all models are CNC controlled, enabling fully automated, repeatable measurement processes that increase throughput on the shop floor. Software: This powerful software supports CAD import/export, DXF overlays and reports that include statistical process control (SPC). Programmable LED lighting: LED lighting provides optimal illumination of the workpiece to enable accurate edge detection and measurement. Advantages: Versatility: with three different variants, the Baty Venture FV offers the perfect solution for workpieces of different sizes and complexity. High measuring speed: Thanks to the CNC control and user-friendly software, measuring times are reduced and efficiency is increased. Precision: The measuring device ensures that both simple and complex workpieces are measured with maximum accuracy. The Baty Venture FV offers the ideal combination of speed, precision and flexibility for companies that need a reliable inspection solution in their production

Condition: excellent (used), Year of construction: 2015, 📌 Glass Processing Center – DENVER Krea / Krea Fit (CNC) General Description: A professional 3-axis CNC glass processing center by DENVER – model Krea (also commonly known as Krea Fit), designed for comprehensive processing of flat glass. The machine combines functions such as grinding, milling, drilling, edge shaping, and polishing, making it an ideal solution for glassworks, window manufacturers, producers of decorative elements, and appliance (white goods) manufacturers. ⸻ Dodpsy Edlbsfx Aiiscp 🛠️ Technical Features and Functions 🔹 CNC Construction: 3 interpolated axes ensure precise tool guidance and high processing quality. 🔹 Spindle: powerful electrospindle with a power rating of approx. 6.6–9 kW (S6), optimized for glass working. 🔹 Automatic Tool Changer: 14-position tool magazine (standard), which speeds up operations and increases work flexibility. 🔹 CAD-CAM & CNC Control: an intuitive CNC control system with CAD-CAM support simplifies programming and 2D/3D model processing. 🔹 Automation: can be equipped with an integrated automatic loading and unloading system, handling trolley, and robot for glass sheet handling. 🔹 Vacuum Kit: additional vacuum tank and distributor for stable glass clamping during processing. 🔹 Helpful Accessories Included:  • various vacuum suction cups,  • tool sets,  • reverse osmosis system (e.g. IDROTECNICA IDRO RO 130 ST),  • tanks and auxiliary equipment. ⸻ Kdsboyk Dx Dsludqncok 📏 Working Range ✅ Supported Materials: flat glass of various thicknesses (typically from a few mm up to approx. 25 mm – depending on tool configuration and program). ✅ Possible Operations:  • edge grinding,  • drilling and milling holes,  • beveling and rounding edges,  • engraving and cutting shapes

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0540, Machine Description: We offer for sale a brand-new machine that was purchased for a specific project. However, this project was not carried out, and as a result, the machine has remained unused since its acquisition. The unit is in perfect technical and visual condition, meeting the manufacturer's specifications. The machine is stored under appropriate conditions, in accordance with the manufacturer's recommendations. The purchase was made from an authorized distributor, which confirms the authenticity of the unit. The machine has never been used in production, making it an exceptional value compared to new equipment. Technical Data: - Capacity: 10 parts per minute (3000-6000 parts per shift) - The machine has a parts magazine, which significantly facilitates operation. - Parts are transported from the magazine using a chain. - The machine performs drilling from 5 sides simultaneously (from the bottom, top, back, left, and right). - The drill can be widely configured, including customized heads, and the addition or removal of units. TECHNICAL SPECIFICATION: - Panel length: 300 – 2500 mm - Panel width: 30 – 250 mm - Panel thickness: 8 - 40 mm Number of lower drilling units: 4 Number of upper drilling units: 4 Number of rear drilling units: 4 Number of horizontal left and right units: 1 x left, 1 x right Drill weight: 3250 kg HORIZONTAL HEADS (LEFT AND RIGHT) - Number of heads: 1 x left, 1 x right - Spacing: 32 mm - Number of spindles: 9 left head, 9 right head - Maximum drilling depth: 40 mm VERTICAL LOWER HEADS - Number of heads: 4 - Spacing: 32 mm - Number of spindles: 3 or 5 - Depending on the selected head - Maximum drilling depth: 40 mm VERTICAL UPPER HEADS - Number of heads: 4 - Spacing: 32 mm (Depending on the selected head) - Number of spindles: 8, 9, 11 - Depending on the selected head (3 heads in a special configuration) - Maximum drilling depth: 40 mm HORIZONTAL REAR HEADS - Number of heads: 4 Dedpfe Agfr Nox Aiiocp - Spacing: 32 mm - Number of spindles: 11 - Maximum drilling depth: 40-70 mm

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Dcedpfx Aozzrutjiisp Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, Year of construction: 2023, machine/vehicle number: CA73, Used capsuling machine Robino & Galandrino Minibloc year 2023 – 3000 bphThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph offers a compact and versatile solution for automatically applying capsules to bottles of still and sparkling wine. As a result, this machine suits diverse production environments. Robino & Galandrino designed this monoblock machine to meet different production needs while ensuring high operational efficiency and consistent product quality.Structure and mechanical configurationRobino & Galandrino configured this machine as a Minibloc automatic capsuling monoblock. Specifically, the design includes two operational heads, each performing specific stages of the capsuling process. The infeed screw aligns and guides the bottles precisely into the processing area. In this way, the machine ensures accurate bottle positioning throughout the cycle.Performance based on capsule typeThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph delivers specific output levels based on the capsule type. Dsdpfx Ao Ady Evoiiocp For instance, it distributes and spins polylaminate capsules on still wine bottles at speeds of up to 1200 bottles per hour. It heat-shrinks PVC capsules onto still wine bottles at up to 3000 bottles per hour. It forms four folds and smooths sparkling wine caps (capsuloni) at speeds of up to 2000 bottles per hour. Moreover, each process maintains excellent consistency and minimal deviation. Therefore, it can satisfy various technical bottling standards across the wine sector.Capsule feeding systemThe machine uses a horizontal capsule magazine with a motorized belt that feeds capsules into the distributor. Notably, it holds around 1200 capsuloni or 1800 standard wine capsules, allowing operators to run longer production cycles without frequent reloads. Consequently, this reduces machine downtime and improves overall line efficiency. Additionally, the feeding system ensures steady capsule flow under different operating speeds. Thus, it contributes to the machine’s stability and reliability.Distributor and synchronization mechanismsThe single-bell distributor performs a 90-degree angular movement to release the capsules. At the same time, a mechanical needle system separates the capsules before distribution to prevent jams and ensure a continuous process. Furthermore, the encoder actively manages the synchronization of all functions and adjusts them in real time. Thanks to this, the system can react dynamically to changes in bottle flow and capsule format. In contrast to older systems, this configuration minimizes manual calibration.Format compatibility and flexibilityThe machine processes bottles in three formats: 0.375 liters, 0.75 liters, and 1.5 liters. Accordingly, operators can use it across different bottling lines and product ranges. In fact, the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph adapts well to the needs of small and medium-sized wineries that require flexible equipment.Operational conclusionsTechnicians appreciate the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph for its solid mechanics and well-optimized capsuling system. In particular, the dual-head structure and encoder-based adjustments enable precise operation and quick format changes. Moreover, i...

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. The chamber was purchased from an official Polish distributor and has been serviced regularly. Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT * Unit is 100% functional * Regularly serviced * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures * Testing under high-humidity conditions * Material aging studies * Testing of electronic components * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit Dsdsz Tzvvjpfx Aiiecp The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. The unit is fully functional and ready for further use.

Condition: used, Year of construction: 2002, fuel type: diesel, gearing type: other, color: grey-black, TITLE: LINDE H30D duplex REF: 26M01 YEAR: 2002 SERIAL NUMBER: H2X351N00134 HOURS: 8,400 ENGINE: diesel ORIGIN: Italian MINIMUM OVERALL HEIGHT: 2.65 m MAXIMUM LIFT HEIGHT: 4.10 m MAST: duplex Dodpjy H S Iyefx Aiijcp CAPACITY: 3,000 kg EQUIPMENT: with forks SIDESHIFTER: yes WHEELS FRONT: 2 REAR: 2 ACCESSORIES: - 4th valve hydraulic distributor REFURBISHED: yes SERVICED: yes TYRES: 80% PRICE: €11,500 + VAT Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales team for updated prices and conditions. For more information: Loris: +39 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialists in trucks, trailers, and hooklift equipment. Over 50 trucks and 150 hooklift bodies, containers with and without cranes available for immediate delivery. E.&O.E Given the number of listings and the level of detail provided, Aurora recommends verifying the correctness of the listed information with the sales team.

Condition: used, Year of construction: 2008, Control SINUMERIK 840 D rolling power 800 kn diameter max. Werkstück: 250 mm work piece width 80 mm spindle diameter 110 mm 100-700 1/min power capacity 110 kW length 2600 mm width 2600 mm height 2600 mm weight 12,5 t Dcodpfxoztfwlo Aiiop Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Dodowmh Hrspfx Aiiecp Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loading Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully enclosed V2A stainless steel Commercial tonnage: 35 t Main wheelbase: 2,980 mm Wheelbase between front axles: 1,795 mm Wheelbase between rear axle and trailing axle: 1,350 mm Exhaust silencer, side-mounted, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side 1-cylinder air compressor, 360 cc, with economy system Pneumatically regulated air processing Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency brake assist Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard light activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 HP) output, 2,650 Nm torque, Euro 6e Heated fuel filter for fuel up to purity class 25 Pre-fuel filter with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as an option for an extra charge) Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double linkage system with PROLINK (overbending articulated arm up to 12°) Electronic overload switch-off with FX900 FASSI stability control FSC including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load-holding valves XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base Hydraulic outriggers, hydraulically extendable on both sides, support width 8.84m Outriggers operable via radio control with proportional control block IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hooks and mounting shackles (short / 500mm) Transport position: folded transversely to the direction of travel Attention: Observe vehicle voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II IE742 connection box Low-profile subframe 180° hydraulically tiltable outriggers / both sides Control system for auxiliary function "winch / xhe-dynamic" Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Dcedpfjwllmaex Aiiop Prepared for operation with variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on articulated arm LED for 2 outriggers, not mounted (crane) LED for 2 outriggers, not mounted (additional support beams) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, engine speed +/-, 6x ON/OFF functions, 10m cable and various operating speed settings, including spare battery, charger, neck and waist belt.

Condition: used, Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo Dcjdpfx Aisirf Eyoisp -Hydraulic fitting: T-distributor 2 1/2" -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm Dedpfx Aijzzz N Hsiecp - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Year of construction: 2016, condition: used, Sewing machine Muller Martini Ventura MC 200 (A371.1000) Year: 2016 Cycles: 1,5 mio (stitches) Description: - Commander with touchscreen Dodpsz Atcuefx Aiijcp - Automatic setting - Feeder - ASIR Automatic Signature Image Recognition: ASIR III - 4 + 4 opening possibilities - Book stacker - PIAB Max. mechanical speed: up to 200 cycles/min Maximum size range: 510 x 320 mm Minimum size range: 120 x 75 mm Number of stitches: 13 Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2650207, travel distance X-axis: 300 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828d, total height: 2,360 mm, total length: 2,020 mm, total width: 1,000 mm, table width: 260 mm, table length: 560 mm, table load: 150 kg, rotational speed (max.): 20,000 rpm, overall weight: 2,180 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 5,500 W, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 16, tool length: 200 mm, tool diameter: 63 mm, tool weight: 3,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, SYIL X5 CNC Vertical Machining Center – New Machine Compact CNC vertical machining center, designed for precision machining of single parts as well as for small and medium-sized production runs. Equipment: Schneeberger mineral cast chassis Siemens SINUMERIK 828D CNC control THK linear guides and ball screws BT30 spindle, 20,000 rpm 16-tool automatic tool changer Coolant system Dcjdpfsz Eh E Tjx Aiisp Automatic centralized lubrication Fully enclosed work enclosure Work area lighting New machine, available in stock, selling price CHF 43,900 (excluding VAT) The machine can be viewed and tested in our showroom in Le Locle, Switzerland. Commissioning, training, and after-sales service are provided directly by Swiss Machines Tools, the SYIL distributor in Switzerland. Please contact us for detailed technical specifications, available equipment, and options.

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve, hydraulic distributor block, hydraulic distributor, block distributor Dcjdpfxektm D As Aiisp -Hydraulic distributors: Hydraulic distributor block from CNC machining center Santenberg GTC S 2 -Individual components: see photos -Submission/Price: complete -Dimensions: 300/210/H190 mm Total weight: 8.4 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 1 months, positioning accuracy: 5 mm, Equipment: documentation/manual, The official FARO distributor is selling a demo unit – the FARO Orbis Premium mobile scanner. The package includes: - FARO Orbis Premium mobile 3D laser scanner - Datalogger portable control unit - 2 batteries - Battery charging station - Connection cable - Monopod tripod Dcsdozzdpvepfx Aiijp - Phone mount - FARO calibration certificate - Durable original case The unit is from 2025, comes with a calibration certificate, and has a valid warranty. It has been lightly used – for customer demonstrations and at trade shows. The mobile scanner is in excellent condition. It provides 3D laser scanning with 5mm accuracy, allowing for very fast scanning of large areas, buildings, and rooms. The stationary Flash mode allows scanning with 2mm accuracy. Technical specifications: - Accuracy: 5mm (2mm in Flash mode) - Scanning distance: 120m - LIDAR channels: 32 - Camera: 72MP - Operating time with 1 battery: 3-4 hours The unit is located in Riga, Latvia, and can be viewed in person or remotely.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 50 mm, spindle mount: MK 5, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 1,400 rpm, rotational speed (min.): 31 rpm, total width: 800 mm, total length: 1,100 mm, total height: 2,400 mm, throat depth: 335 mm, table width: 480 mm, table length: 560 mm, overall weight: 1,270 kg, Equipment: CE marking, documentation/manual, Special Offer – 5% Discount Available! Column Drilling Machine MTP Z5150B – New The MTP Z5150B Column Drilling Machine is a professional industrial machine designed for drilling, reaming, countersinking and tapping operations in steel, cast iron, aluminum, brass, bronze and engineering plastics. Its heavy-duty cast iron construction and machine weight of 1270 kg provide outstanding rigidity, stability and machining accuracy, even when using large-diameter tools. Equipped with a 12-speed mechanical gearbox, automatic spindle feeds and a tapping function, the machine allows the operator to select the ideal cutting parameters for different materials and machining operations. The integrated coolant system further improves machining efficiency and tool life. With a spindle speed range of 31.5–1400 rpm, the MTP Z5150B is suitable for both heavy-duty drilling and precision machining. The large T-slot worktable ensures secure workpiece clamping, while the rigid column construction minimizes vibration for accurate and reliable results. Main Features • Heavy-duty cast iron construction • 12-speed mechanical gearbox • Automatic spindle feeds • Tapping function • Integrated coolant system • Adjustable worktable • High machining accuracy • CE certified Standard Equipment • Mechanical gearbox • Automatic spindle feeds • Tapping function • Integrated coolant system • Adjustable worktable • Safety guard • Emergency stop • Technical documentation • CE Declaration of Conformity Technical Specifications • Model: MTP Z5150B • Machine type: Column drilling machine • Maximum drilling capacity: 50 mm • Spindle taper: MT5 • Quill travel: 250 mm • Motor power: 3 kW • Power supply: 400 V / 50 Hz / 3-phase • Spindle speed: 31.5–1400 rpm • Number of spindle speeds: 12 • Automatic feed: 0.056–1.80 mm/rev • Throat depth: 335 mm • Table size: 560 × 480 mm • Machine weight: 1270 kg • Condition: New • CE certified Applications • Drilling • Reaming • Countersinking • Tapping • Metal fabrication • Tool rooms • Maintenance workshops • Manufacturing plants Suitable Materials • Structural steel • Tool steel Dcedpfxjzcn A Ds Aiisp • Cast iron • Aluminum • Brass • Bronze • Engineering plastics Transport and Delivery The machine is available from stock and ready for immediate dispatch. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, G&G PE/PP Pipe Die Head PO 125/600 Type: PO 250/600 spiral mandrel distributor Year of manufacture: 2015 Application: Two-layer pipes + color stripes for PE and PP pipes Max. diameter: 125 mm Min. diameter: 20 mm Maximum throughput: 600 kg/h Lightly used Condition: Very good The pipe die head is my property. Standard: Dcodpfx Aij Admdfeiop Sachal Extrusionsmaschinen Bahnhofstr. 6 D-26345 Bockhorn-Grabstede

Condition: good (used), Year of construction: 2013, functionality: fully functional, 5-axis CNC grinding machine - Solution Line control system - Direct drive on all linear axes - Direct drive in all rotary axes - Direct path measuring systems in the X, Y, and Z axes - Automatic 5-position grinding wheel changer with its own NC drive for grinding wheels and coolant distributor, with collision monitoring - Central lubrication Dodozcch Ispfx Aiiocp Further details available upon request.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Mobile stainless steel frame Stainless steel C-frame Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Cutting system for all 8 outlets Dedozqc U Nspfx Aiiecp Pneumatically driven cutting mechanism Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Width adjusted to the 8 product outlets Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line

Condition: used, Year of construction: 2010, functionality: fully functional, Gietz FSA 870 Compact high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 870 x 560 mm : max speed 6,000 sheets / hr Top FSA 870 Compact specification Dcjdpfxsz Hw Tvs Aiisp High speed MABEG suction feeder : 6 heating zones : 2 x electronic servo longitudinal foil feeds : non stop delivery Fully reconditioned by exclusive distributor for Gietz AG , Switzerland in UK

Condition: used, functionality: limited functionality, machine/vehicle number: NM0KKXTP6KNA91285, mileage: 69,672 km, power: 243 kW (330.39 HP), fuel type: diesel, overall weight: 18,000 kg, tire size: 315/80 R22.5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, emission class: euro6, suspension: steel-air, number of seats: 3, permissible axle load (axle 1): 8,000 kg, Year of construction: 2023, operating hours: 2,081 h, Equipment: ABS, EBS, cruise control, electronic stability program (ESP), power assisted steering, tail-lift, truck registration, FORD TRUCKS 1833 DC 4x2 – BOX TRUCK WITH TAIL LIFT – EXPORT PRICE – SOLD AS IS Ford Trucks 1833 (Road Series) 4x2, manufactured in 2023, with only 69,672 km and 2,081 operating hours. Sold as new and maintained by Herman Noyens Trucks, the official Ford Trucks distributor for Belgium. ENGINE / DRIVE TRAIN - Ford Ecotorq 9.0 l, 6-cylinder, 330 hp (243 kW), Euro 6 - Engine brake, PTO (power take-off) - Front axle 8.0 t, air suspension rear, tires 315/80 R22.5 - Wheelbase 4,750 mm, GVWR 18,000 kg CABIN - Day cab (DC), electrically tiltable - Double passenger seat (3 seats), driver's seat with armrest - Manual sunroof, light and rain sensor - Cruise control, ABS/EBS/ESP BODY - Enclosed box body (van) Arslan with side door on the right - Dhollandia tail lift - Side underrun protection - Preparation for trailer (full trailer application) CONDITION OF THE VEHICLE – READ CAREFULLY - Engine and gearbox are in good order. - The vehicle DOES NOT START at the moment: presumably a fuse / electrical problem. Not further investigated. Dedoz Ebnhepfx Aiiecp - Damage to the box body: rear and top of the van damaged (see photos), frame of the tail lift damaged, lower side profile and reflective strip damaged. - Vehicle is sold AS IS, without warranty, to be collected in Geel (Belgium). - Price is an export price: EUR 25,000 excl. VAT (EXW Geel). Belgian registration 2-ELZ-411. Chassis number NM0KKXTP6KNA91285. All documents available.

Condition: used, mileage: 73,639 km, power: 115 kW (156.36 HP), first registration: 11/2010, fuel type: diesel, overall weight: 9,500 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: blue, gearing type: mechanical, emission class: euro5, loading space volume: 4 m³, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, Year of construction: 2010, Equipment: ABS, electronic stability program (ESP), Well-maintained Atego MB 816 three-way tipper truck Special equipment: Trailer brake, 2-line; trailer coupling: towing hitch; trailer coupling: central axle trailer G 250; trailer socket 24V / 15-pin; audio system: CD radio; transmission: 6-speed - type: G 60-6; graphics information display with eco-meter; hydraulic pump (Meiller pump - 5 pistons - 254 / 1); engine start/stop system; spare wheel holder behind the rear axle; rear window; seats in the cab: middle seat with seatbelt; socket in the cab, 24V; crossmember for trailer coupling Dcedpfx Aiszu H Emoiep Additional equipment: Emissions standard EURO 5; axle configuration: 4x2; exterior mirrors, electrically adjustable and heated; battery 115 Ah; cockpit distributor; roof hatch (steel); differential lock, rear axle; cab: S (short); suspension: leaf spring / leaf spring; generator 80 A; urea tank (AdBlue): 25 liters; urea tank (AdBlue): plastic; rear axle H 2, crown wheel 325; interior filter: pollen filter; body/superstructure: tipper; fuel tank: 105 liters; Atego 2 model upgrade; engine 4.3 liters - 115 kW diesel (OM 904 LA); engine brake with constant throttle; auxiliary drive MB 1C; wheelbase 3020 mm; disc brakes; side impact protection; seats in the cab: single passenger seat, fixed; seats in the cab: driver's seat, standard suspension seat; steel rims 6.75x17.5; underrun protection, fixed, rear; underrun protection, front; immobilizer; permitted total weight 9.50 t Tire condition, front axle approx.: 60%; rear axle approx.: 50% Errors and prior sale excepted!