Used Ventrac 3200 for sale (1,471)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support Fodpoz Rl Nzefx Akyjpn - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection Fpjdpfx Aoz Rl Uqokysn - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, cutting width (max.): 3,200 mm, table height: 800 mm, overall weight: 1,610 kg, total width: 4,000 mm, total height: 800 mm, total length: 7,000 mm, table width: 3,200 mm, table length: 3,200 mm, Equipment: safety light barrier, Are you looking for a Zund cutting table in perfect condition? Due to changes in our production processes, we are offering our exceptionally young and fully equipped Zünd G3 3XL-3200 for sale. Featuring a massive working area of 3200 mm x 3200 mm, this machine is the ultimate production tool for processing wide-format textiles and XXL flatbed materials. With only 700 production hours on the clock, the system is in absolute mint condition. Equipped with an extended table and a professional unwinding system, this setup is fully optimized for a highly efficient, continuous, and tension-free roll-fed workflow. Key Specifications & Configuration: • Working Area: 3200 mm x 3200 mm (3XL-3200) – Accommodates materials up to 3.2 meters wide! • Extended Table: Ideal for seamless material advance, easy weeding/offloading, and uninterrupted production. • Unwinding System (Roll Feed): Industrial textile unwinder ensuring perfectly tension-free and straight material feeding directly from the roll. • Software: Includes Zünd Cut Center (ZCC) software license. Included Modules and High-End Tools: • DRT (Driven Rotary Tool): Driven rotary tool specifically designed for reliable, fast, and wrinkle-free cutting of various textiles (such as banner material, polyester, canvas, and mesh). • Registration System: Integrated camera system for precise registration mark recognition and automatic contour compensation. Machine Condition: The machine is in absolute mint condition and has only operated in a clean production environment. It has been fully maintained according to factory guidelines. The Zünd is currently still installed under power and can be demonstrated fully operational for serious inquiries. Fpjdpfx Ajz Inc Rskyen Decommissioning, transport, and installation are at the buyer's expense and risk (assistance in contacting certified Zünd technicians can be provided).

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) Fpodpfxjzhtfmo Akyjn with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Fodpfx Asy Um S Nokyspn Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: good (used), Year of construction: 2017, operating hours: 470,000 h, functionality: fully functional, machine/vehicle number: 1HA06A, overall weight: 2,200 kg, type of input current: three-phase, total width: 12,000 mm, total length: 40,000 mm, total height: 1,600 mm, power: 11 kW (14.96 HP), working width: 3,200 mm, number of ink cartridges: 6, used machine, working state Fpsdettunyspfx Akysn

Condition: like new (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, cutting height (max.): 177 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, total length: 4,000 mm, overall weight: 870 kg, table height: 870 mm, Equipment: CE marking, saw blade guard, PAOLONI P3200A 4200mm cutting length panel saw | Scoring saw | Electronic control | Year 2002! Professional PAOLONI P3200A panel saw from 2002 – a high-quality Italian industrial machine designed for precise cutting of solid wood and wood-based panels. The P3200A model stands out with its exceptionally rigid construction, precise guidance of the sliding table, and electronic control, which has made it a popular choice in professional carpentry workshops and furniture factories for many years. The machine is ready for operation and is ideal for both individual and serial production. KEY ADVANTAGES - Year of manufacture: 2002 - Italian manufacture: PAOLONI - Sliding table length: 3800 mm - Electronic machine control - Scoring saw - Saw blade tilt: 0–45° - Precise aluminum sliding table - Massive cast iron worktable - Professional upper guard with dust extraction - Ideal for furniture boards, MDF, HDF, plywood, and solid wood - Machine ready for operation Fpjdjzxxi Eepfx Akyen TECHNICAL DATA - Manufacturer: PAOLONI (Italy) - Model: P3200A - Year of manufacture: 2002 - Cutting length: 4200 mm - Aluminum sliding table length: 3800 mm - Sliding table travel: approx. 3500 mm - Cutting width with parallel guide: up to 1300 mm - Cutting length: 4200 mm - Tilting unit: 0–45° - Scoring saw: YES - Electronic control: YES - Control display: YES - Main saw blade diameter: up to 500 mm (according to P3200 series documentation) - Saw blade bore: 30 mm - Scoring saw blade diameter: 125 × 20 mm - Maximum cutting height at 90°: up to 177 mm (depending on the saw blade used) - Maximum cutting height at 45°: up to 133 mm - Cast iron table dimensions: 1150 × 680 mm - Table height: 870 mm - Installed power (nameplate): 8.05 kW Weight: 870 kg EQUIPMENT - electronic control panel - scoring saw - tilting saw unit - 3200 mm aluminum sliding table - parallel guide - upper guard with dust extraction - safety switch - cast iron worktable APPLICATION The machine is intended for: - furniture production - carpentry workshops - door production - window production - cutting laminated boards - MDF - HDF - plywood - solid wood - wood-based materials The machine is in very good technical condition. The solid Italian construction ensures high operational efficiency, high cutting accuracy, and years of trouble-free operation. PRICE: VAT MARGIN BRUTTO OR VAT 23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 15630;15631, color channels: CMYK, number of print heads: 40, counter reading (black): 12,000,000, counter reading (color): 2,000,000, Equipment: auto duplex, documentation/manual, Only 2 (two) million clicks on color meter! 12 Million on black meter. Excelent condition! Fedez E Uqcopfx Akyepn 30 kHz printing heads, 40 printing heads, all of them in mint condition, no streaking or any demage on heads. It was under full maintenance of Canon Hungary Canon unwinder andd Hunkeler RW6 rewinder included Acelabs AceformChecker Prit Validating System on machine. Best choice for spareparts or donor.

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request Fedpfxsz Iqdqs Akyjpn

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Fpodjzfv T Iopfx Akyjn Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530, workpiece weight (max.): 3,300 kg, table width: 750 mm, table height: 720 mm, table length: 3,900 mm, rotary table diameter: 315 mm, overall weight: 16,500 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 8,000 rpm, spindle motor power: 25,000 W, spindle nose: ISO 40 DIN 69871, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, - Lowered worktable by 185 mm - Spindle-to-table distance: 325/925 mm - Maximum tool length: 330 mm - 4-position PICK UP tool changer station for drills with a length of up to 700 mm - Coolant system with passage through the spindle at 30 bar, with paper filter - Drag-type chip conveyor Fedpfx Ajzycawokyepn - CNC table diameter: 315 mm - Prepared for indexing operations - CE marking

Condition: used, Year of construction: 2022, For sale: a CNC bending press, model FICOM PBH-63T/3200, manufactured in 2022, with minimal usage. The machine was purchased new and has seen very little use. It is currently fully operational and connected to power, allowing for inspection, testing, and trial bends. The machine is available on-site and ready for immediate pickup. We have the technical documentation for the machine. Key information: Manufacturer: FICOM Model: PBH-63T/3200 Year of manufacture: 2022 Bending force: 63 T Working length: 3200 mm Controller: ESTUN E21 Controlled axes: X and R axes with NC control Equipment and features: ESTUN E21 controller Automatically controlled X and R axes Quick release system for upper tools Linetech Laser Safe laser operator protection system 85° bending punch and die 30° bending punch and die Technical documentation for the machine Fedpfx Aksz Aiqzjyepn Two different sets of bending tools allow the machine to be immediately adapted to different bending tasks. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 3240 mm Bending capacity, steel: 4.0 mm Bending capacity, stainless steel: 3.0 mm Bending capacity, aluminum: 8.0 mm Control system: DELEM DA65 graphic 2D CNC-controlled: angle, bending radius, and back gauge Bending angle setting: 0 – 150° Fjdez I Ekxspfx Akyjpn Upper beam opening: 500 mm Back gauge travel up to 1100 mm, with table extension up to 3000 mm Motor power: 7 kW Dimensions (length x width x height): approx. 5300 x 2350 x 2200 mm Weight: approx. 7.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Fpjdjzl Tc Topfx Akyjn Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2000, CNC control: Heidenhain TNC430 Machine travel: X-3200 Y-720 Z-600 Fodpfx Ajz Hm N Tokyopn Min. spindle to bed: Z-140 mm Bed dimensions: X-3900 mm Y-650 mm 20 bar coolant pressure Tool changer: 30 tools Max. spindle speed: 8000 rpm Available for immediate delivery.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, oil tank capacity: 200 l, total length: 3,850 mm, total width: 1,650 mm, total height: 2,680 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, CNC press brake 110 t × 3200 mm – MTP SPB 110/3200 with Delem DA-66S, 6+1 axes – NEW, IN STOCK New electro-hydraulic servo-synchronised CNC press brake with 1100 kN bending force and 3200 mm worktable, controlled by the Delem DA-66S 24" touch-screen CNC with 3D graphics. 6+1 CNC axes (Y1, Y2, X, R, Z1, Z2 + V crowning), servo main drive, laser safety guard. The machine is in stock in our warehouse and ready for immediate dispatch. KEY FEATURES • Delem DA-66S CNC: 24" full-touch colour screen, 3D graphics, automatic bend-sequence calculation, Profile-S2D offline software • 6+1 axes: Y1, Y2 (ram), X, R (back gauge depth/height), Z1, Z2 (finger positioning) + V (CNC crowning) • Electro-hydraulic servo synchronisation of Y1/Y2 with GIVI (Italy) linear scales on both sides, resolution 0.005 mm • ESTUN servo main motor – up to 60% energy saving, quiet operation • Rexroth hydraulic valve block and pump, NOK seals, EMB fittings • CNC motorised wedge crowning (V axis) – automatic deflection compensation along the full table length • Servo back gauge on Taiwan ball screws and double linear guides, 3-section adjustable stop fingers • Upper tool quick clamping (accuracy 0.02 mm), height-adjustable front sheet supports • Safety: DSP (Italy) laser guard, rear light curtain, KACON foot switch, Schneider electrics • Rigid frame verified by FEA, machined in one set-up on a CNC gantry machining centre TECHNICAL DATA • Nominal force: 1100 kN (110 t) • Worktable length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 400 mm • Ram stroke: 200 mm • Max. opening height: 480 mm • Ram speed: rapid approach 180 mm/s, working 13 mm/s, return 170 mm/s • Ram repeatability: ±0.01 mm; positioning accuracy ±0.02 mm • Back gauge repeat positioning accuracy: ±0.02 mm • Workpiece straightness: 0.3 mm/m • Main motor: 8.5 kW servo • Dimensions (L × W × H): 3850 × 1650 × 2680 mm • Weight: approx. 7 t Fsdez I S Drjpfx Akyjpn • Year of manufacture: 2026, CE marked STANDARD DELIVERY Press brake, levelling bolts, foot switch, operation manual, CNC manual, hydraulic and electrical schematics, foundation drawing, CE certificate. Condition: new. In stock – immediate dispatch. Terms: price net, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Documentation and manual included. Transport can be arranged to any European destination – delivery quote on contact.

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 39,000 kg, rotor length: 3,200 mm, power: 320 kW (435.08 HP), rotational speed (max.): 58 rpm, input voltage: 400 V, Completely Overhauled Machine: Delivery time: November 20, 2026 Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without large contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2 x 160 kW (ABB) Screen perforation: Screen holes 148 mm Fsdpfx Aewkilwskyspn Control cabinet: complete with (frequency converter - ABB) Cooling system: included Working opening: 3190 x 1750 mm Filling volume: approx. 8 m3 Rotor length: 3190 mm Rotor diameter: 745 mm Rotor speed: 50Hz: 58 rpm Number of rotor knives: 36 pieces Knife dimensions, cutting knives: 145 x 145 mm Counter knives at the bottom: 9 pieces Stripper comb at the top: 9 pieces Feed system, hydraulic: 11 kW Total weight: approx. 39 t Dimensions L x W x H mm: 6250 x 3260 x 3090 mm Hopper: included Delivery time: November 20, 2026

Condition: like new (used), Year of construction: 2020, functionality: limited functionality, operating hours: 50 h, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 80 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 72 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, total length: 7,500 mm, total width: 6,000 mm, total height: 1,900 mm, overall weight: 5,000 kg, table height: 1,000 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, AES Alpha Heavy Duty Beam Saw 3200 * 3800 mm | Showroom Condition | Less 100 Hours Category: Panel Saw / Beam Saw Condition: Used – Like new showroom machine Description: For sale: AES Alpha heavy duty beam saw. The machine has been used exclusively in a showroom for demonstrations and training. It is in working condition with less than 100 working hours. Equipped with all Yaskawa and Schneider Electric drivers. Technical Data: Cutting width: 3200 mm Bridge depth: 3800 mm Main motor: 15 kW (20 HP) Scoring motor: 2.2 kW (3 HP) Max cutting height: 72 mm Saw carriage speed: 70 m/min Pusher speed: 60 m/min Max blade: 380 mm Max scoring blade: 200 mm 8 clamps AES Alpha Heavy Duty Paneelzaag 3200 mm | Showroomstaat | Minder 100 Werkuren Categorie: Paneelzaag / Opdeelzaag Conditie: Gebruikt – Zo goed als nieuw (Showroom) Beschrijving: Te koop: AES Alpha heavy duty paneelzaagmachine. Deze machine werd uitsluitend gebruikt in een showroomomgeving voor demonstraties en trainingen. De machine verkeert in uitstekende staat en heeft minder dan 100 werkuren. Uitgerust met hoogwaardige aandrijvingen van Yaskawa en Schneider Electric, wat zorgt voor maximale betrouwbaarheid en precisie. Fodpjyzzguofx Akyjpn Technische specificaties: Snijbreedte: 3200 mm Brugdiepte: 3800 mm Hoofdmotor: 15 kW (20 HP) Voorritsmotor: 2,2 kW (3 HP) Maximale zaaghoogte: 72 mm Zaagwagensnelheid: 70 m/min Duwbalk snelheid: 60 m/min Max. zaagdiameter: 380 mm Max. voorritsdiameter: 200 mm 8 klemmen Luchtkussentafel (3 stuks): 1 vast, 2 verplaatsbaar Pneumatische zaagwagen beweging Aandrijvingen: Yaskawa & Schneider Levering: Binnen 10 dagen mogelijk Prijs: Op aanvraag

Condition: used, Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: G300L321302, cutting length (max.): 3,200 mm, type of input current: three-phase, input current: 32 A, input voltage: 208 V, table width: 1,800 mm, table length: 3,200 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer a Zünd L-3200 machine, type: paper cutting machine, year of manufacture 2022. Product: Cutter G3 Type: L-3200 Year of manufacture: 2022 Serial number: G300L321302 Country of origin: Switzerland Fpodpfx Asymdb Dskyjn Voltage: 208/400 V AC 3-phase Current: 32 A Frequency: 50–60 Hz If you have any questions or require additional information, please send us a message or contact us by phone. The complete specification is available upon request. The machine is practically new (1000 hours).

Condition: good (used), Year of construction: 2009, 1 used induction shrinking device Manufacturer: BILZ Model: Thermo Grip ISG 3200-WK Year of manufacture: 04/2009 Serial number: 0461 Tool holder: Ø 54 mm Fedpjz E Hmcofx Akyopn Tools, carbide: Ø 3–50 mm Tools, HSS: Ø 6–50 mm Cooling: Water cooling Coolant tank: 30 liters, integrated Coolant: Emulsion Runout accuracy: < 0.003 mm Clamping system: ThermoGrip Operation: Control panel Dimensions (L × W × H): approx. 700 × 650 × 1,700 mm Weight: approx. 120 kg Connection: 3 × 400 V Frequency: 50–60 Hz Connected power: 11 kW Compressed air: 6–10 bar Cooling: Integrated water cooling Control: Digital control panel CE marking: Present Accessories and scope of delivery Various reducing rings and exchangeable discs Tool holders for different chucks Induction coil with height adjustment Integrated cooling unit Original operating manual from BILZ/KOMET, including EC declaration of conformity

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale is a robust Lazzari Juno 320 panel saw in a heavy-duty industrial design. This machine is ideally suited for professional use in carpentry, joinery, and interior design. Fodpjzn N Ukofx Akyepn Thanks to the easy-to-use sliding table, the generously sized machine table, and the 45° swivel function of the saw blade, the machine enables precise longitudinal, cross, and miter cuts. Technical data: Manufacturer: Lazzari Type: Juno 320 Year of manufacture: 2001 Main motor: 5.5 kW Voltage: 400 volts Speed: 3,200 / 5,000 rpm Cutting length / table length: 3,200 mm Table width to the right of the saw blade: 1,250 mm Machine weight: approx. 750 kg CE version Equipment: Sliding table 3,200 mm Saw blade, 45° tiltable Mechanical height and swivel adjustment Parallel fence with fine adjustment Angle/miter fence with scale Generously sized machine table Robust aluminum guide Control panel with emergency stop Speed control 3,200 / 5,000 rpm Heavy-duty industrial design Precise guide systems Dust extraction connections Ideally suited for: Solid wood processing Panel cutting Furniture making Interior design Carpentry and joinery workshops Series and individual production The machine is in good, used condition with the usual age-related signs of wear. It impresses with its stable design, high cutting precision, and reliable industrial drive. Inspection and a test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: good (used), DANOBAT RT-3200 Surface Grinding Machine Specification Maximum grinding capacity 3200 × 900 mm Maximum grinding height 600 mm Table size 3200 × 800 mm Fsdpfx Akoz D Dw Njyopn Grinding wheel speed Up to 1,000 rpm Grinding wheel motor power 24 kW Approximate machine weight 16,000 kg Overall dimensions 7,000 × 3,000 × 2,80

Condition: excellent (used), Year of construction: 1987, I sell the double knife veneer guillotine OMPEC OA 3200/400. Year 1987. Cutting length 3200mm. Fpodpsyc I Tvofx Akyjn Cutting height 80mm. Cutting width 20-450mm. Very good condition. Available immediately.

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm Fpedpfx Aozrvdgekyon No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, table width: 1,000 mm, table load: 11,000 kg, table length: 3,200 mm, type of input current: AC, workpiece weight (max.): 11,000 kg, overall weight: 18,500 kg, input voltage: 400 V, Technical Description CNC bed milling machine in very good condition, manufactured by MTE. Year of manufacture: 2006 Control system: HEIDENHAIN iTNC 530 24-position tool changer Chip conveyor Travel range: Longitudinal (X) = 3,000 mm Transverse (Y) = 1,200 mm Vertical (Z) = 1,500 mm Work table/clamping surface: Length = 3,200 mm Width = 1,000 mm Maximum table load: 11,000 kg Tool holder: ISO 50, DIN 69871 AD Draw bolt: DIN 69872 Form A Fsdszu R Raopfx Akyspn Main drive: Maximum drive power: from 198 rpm, 30 kW Spindle speed range: Spindle speed = 20 to 6,000 rpm Feed rates: X, Y, and Z axes mm/min 2 – 15,000 Maximum rapid traverse rate: X, Y, and Z axes mm/min 25,000 Space requirement: Length approx. mm 8,100 (without transverse conveyor + 1,280 mm) Height approx. = 3,300 mm Width approx. (at Y = 1,200 mm) mm 5,000 Weight: approx. 18,500 kg Connection power: approx. 52 kVA