Used Used Milling Machine for sale (90,277)

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Ljdpjzc Dyxofx Anueac Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC-Steuerung Lajdoym Nbcepfx Anujc Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot Laodjr E D Eaopfx Anuec 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22

Condition: used, Year of construction: 2013, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 62130810, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,300 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, rapid traverse X-axis: 16,000 m/min, rapid traverse Y-axis: 16,000 m/min, rapid traverse Z-axis: 16,000 m/min, CNC bed-type milling machine Kiheung KNC U1050 - Control: HEIDENHAIN iTNC 530 - Tool holder SK50 - Coolant tank 600 l Lajdpfx Anjxp N H Noujc - Universal automatic milling head A 4 Plus - High-performance cooling system with 2 high-pressure pumps, CTS 16 bar, paper filter - 2 coolant water tanks - Coolant spray gun - Hinged chip conveyor

Condition: used, Year of construction: 2009, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 6290309, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, Model X 3100 - HEIDENHAIN iTNC 530 path control - Max. spindle speed 4,000 rpm - Table length 3,600 mm - Table width 1,050 mm - Max. table load 8,000/13,000 kg - Y-axis 1,250 mm, extended travel - Z-axis 1,600 mm, increased column height, vertical travel 1,600 mm - Table extension to 1,050 mm Ledpfx Ajxp I Swenuoac - Universal automatic milling head A 4, universal bi-rotating automatic milling head - Vertical tool changer, 24 positions, incl. spindle orientation - CTS (coolant through spindle), 2 pumps - Preparation for 4th axis - Full-width chip augers front and rear - High-performance hinged belt chip conveyor - Full machine enclosure

Condition: used, Year of construction: 2012, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 66120101, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, Model X 4000 - HEIDENHAIN iTNC 530 path control - Feed in all 3 axes - Rapid traverse X: 16,000 mm/min, Rapid traverse Y: 12,000 mm/min, Rapid traverse Z: 10,000 mm/min - Coolant tank with option for through-spindle cooling, 2 pumps, 1,700 l - Vertical tool changer for 24 tools - Universal automatic milling head A 4 Plus - CTS 16 bar through-spindle cooling Lodpfjxp Nutox Anuoac - Air through the spindle (max. 10 bar) - Hinged belt chip conveyor X 4000, rear, raised discharge - Hinged belt chip conveyor, front, raised discharge, narrow version

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Ljdpfx Aneyry Rfoueac Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Lajdpfx Anoq T I Izeusc Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine Laodpfx Aorywgzonuoc made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Work area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle taper SK 40 Speed range n 50-2500 rpm Laedey Awz Ropfx Anujc Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Year of construction: 1999, condition: good (used), used moving column bed milling machine > make Kekeisen > type 1200/8 > year99 > With Heidenhain TNC 426 Ledjm Twc Tspfx Anujac > > Spindle mounting SK40 > With 30-fold tool changer > Speed 20-7300 rpm > Rapid traverse 0-30 m/min > travels > X 1200 mm > Y 500 mm > Z 800 mm > Milling head automatically swivels in vertical > and horizontal position > Drive power 28 kw > Weight 12 to

Condition: used, 1 used engraving cutter grinder Manufacturer: Deckel Model: SOE with optics Year of manufacture: 1988 Technical specifications: Motor speed: 2800 rpm Grinding spindle speed: 4500 rpm Drive power: 0.55 kW / 380 Volt Weight approx. 200 kg Accessories and equipment: Collets Optical system Ljdpfx Anoyl Iipouoac Machine base / pedestal Tools

Condition: good (used), Year of construction: 1995, 1 used universal tool and cutter grinding machine Manufacturer: Deckel Maho Type: FP 1 Year of manufacture: 1995, with CE certification Equipped with Heidenhain TNC 123 digital display Technical data: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle mounting: SK 40 Table size: 600x210 mm Laodpfx Anszamw Ieuec Spindle speeds: 40-2000 rpm Machine weight: approx. 1 t Space required: approx. 1.6x1.3x1.8 m

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m Lsdpfx Aern I Rzonujac

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Axes Ledpfx Anorw Arzoueac X-axis travel mm: 3.000 Y-axis travel mm: 1.700 Z-axis travel mm: 1.500 Feed rates m/min: 10 Rapid traverse m/min: X, Y: 20; Z: 10 Worktable Table dimensions mm: 3.200x1.200 Maximum weight on table kg: 8.000 T-Slots: 7xT22 - 150 mm Spindle Spindle speed rpm: 30 - 5.000 Spindle drive power kW: 28/38 Gear box steps: 2 Cooling Cooling through the Spindle Center bar: 22 Tool system Tool holder: ISO-50 DIN 69871A Equipment Electronic Handwheel Chip conveyor 4th axis ready

Condition: like new (used), Year of construction: 2011, Retrofitted: 2026 Lasdpfxjzcz Sre Anusc Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 10000 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 150 - 2650 mm  (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 Tn/m2Machine weight approximate: 56000 kgMachine dimensions approximate: 16520 x 8575 x 5290 mm Accessories Guarding: front sliding doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeElectronic handwheel: HR-410Coolant: external internal high-pressure coolant through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 2000, x-travel 880 mm y-travel 630 mm Ledpfjzfaxhjx Anusac z-travel 630 mm weight of the machine ca. 8800 kg

Condition: used, Year of construction: 2011, number of spindle speeds 18.000 U/min NC rotary indexing table Ø 630 mm control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Lsdpfxozczhas Anusac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 1989, x-travel 580 mm y-travel 380 mm z-travel 360 mm total power requirement 6 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,800x2,130x1,980 m Lodpozczfxefx Anuoac

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 600 x 200 mm spindle taper SK 30 spindle turning speed range 80 - 2200 U/min feeds X-axis 50 - 550 mm/min feeds Y-axis 50 - 550 mm/min rapid traverse 1500 mm/min quill stroke 45 mm vertical head swivelling +/- 90 ° Laedpfezczdhex Anuoc total power requirement 1,4 kW weight of the machine ca. 500 kg dimensions of machine L x W x H 1,50 x 1,20 x 1,60 m Accessories: DRO on 3 axis HEIDENHAIN, solid table, vertical head with quill retraction, counter bearing, various short and long tool fixtures, coolant

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 460 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 8,000 rpm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,500 mm, total width: 2,100 mm, total length: 2,200 mm, table width: 410 mm, table length: 900 mm, table height: 820 mm, type of input current: three-phase, table load: 350 kg, overall weight: 3,630 kg, controller manufacturer: Fagor, controller model: 8055 iA/MC, coolant supply: 2.7 bar, tool diameter: 100 mm, tool length: 300 mm, tool weight: 8,000 g, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, Used machining center – Micromill MM 430 - Control system: Fagor - Spindle – 8000 rpm – mount DIN 69871 40 ISO - Semi-automatic with manual feed control - Automatic with cycle function - DIN ISO programming - 10.4" color display - Large memory for created programs - Motorized spiral chip conveyor system - Tool changer (carousel) for 16 tools - Linear roller guides in all 3 axes - Automatic central lubrication - Spindle orientation - Work table, precision-ground with 4 T-slots - Precision-ground ball screws in all 3 axes - Complete machine enclosure with 2 front sliding doors - Coolant system with chip flushing system - Telescopic guide rail cover for all 3 axes - Low-voltage system - Oil separator - Rigid tapping - Servo motors (direct drive) for feeds - Electronic handwheel for all 3 axes Lodpfozcyivsx Anueac - Ethernet connection - Spindle blow-out function - Work area lighting The machine can be inspected under power at any time.

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card Lajdpfx Anow Ed U Nsusc - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: excellent (used), Year of construction: 1995, total height: 600 mm, total width: 800 mm, total length: 1,200 mm, overall weight: 200 kg, Seperate coolant and frequency converter Last service & Test Log in 2018 Run out in 1 uM Spindle speeds:50000Rpm Spindle Taper:50ISO/Bt/Mk Length: 1200mm Width: 800mm Height: 600mm Weight: 200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ljdpfozcxy Hsx Anueac

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 8220, Hermle UWF 801 Universal Tool Milling Machine with Extensive Accessories Manufacturer: Hermle Model: UWF 801 Year of Manufacture: approx. 1986 Tool Holder: SK40 Digital Readout: Heidenhain 3-axis Digital Readout Description For sale is a Hermle UWF 801 Universal Tool Milling Machine from the in-house mold shop of a medium-sized company specializing in resin-bonded magnetic materials. The machine was used in production for the manufacture, machining, and maintenance of injection molds until the site was closed. It operated precisely and reliably until recently and comes from a production environment with high requirements for accuracy and quality. Equipment ● Universal Swivel Milling Head ● Horizontal Milling Attachment ● Heidenhain 3-axis Digital Readout ● Automatic Feeds ● Coolant System ● Central Lubrication System ● Machine Lighting ● Tool Holder SK40 Scope of Accessories The scope of delivery includes an extensive accessory package, including: ● Numerous SK40 tool holders ● Collet chucks ● Collet sets ● Milling arbors ● Machine vise ● Dividing head / rotary table accessories ● Other tools and clamping accessories as shown in the pictures Condition: The machine is in good, age-appropriate condition. It was used until the plant was shut down and subsequently stored. This offer is a private sale. No warranty is provided. Inspection is expressly welcome by appointment. Location Ljdpfxezd Tbas Anusac Bergisch Gladbach near Cologne Loading Loading is possible by arrangement. Price €8,000

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down Laedszcu Tcepfx Anujc - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)