Used Upper Support for sale (14,606)

Condition: good (used), The machine has been inspected in our warehouse and is fully functional. We can ship worldwide. Product number: 0011276 Brand: Küppersbusch Model: FES 150 Product category: Cooking kettles Njdpowzx D Rsfx Ahvewd Capacity: 150 liters Length: 1000 mm Width: 850 mm Height: 980 mm Connection voltage (V): 400 Power (W): 23100

Condition: used, Year of construction: 2004, gearing type: other, first registration: 01/2004, color: orange, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Küpper Weisser IMSSN, drive type E2940HFA. Hydraulic drive, dampening salt system, tank 1950ltr. folding roof, protective grille, unladen weight: 1365kg. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nwodpfxskn Aame Ahved - .

Condition: used, mileage: 999 km, first registration: 01/2000, Salt shaker control panels: - Mecagil Lebon - Price per piece Nedpfx Ahoqxudaovjwd You can find our entire vehicle stock at auto-ungar Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, mileage: 999 km, first registration: 01/2010, Device supports / spreader supports: - various versions in stock - Price per support Nwodpfsqxuffox Ahvsd You can find a video of this offer at s://youtube/watch?v=1jg47xtd1ho You can find our entire vehicle stock at auto-ungar Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, Year of construction: 2002, gearing type: other, first registration: 01/2002, color: silver, mileage: 1,001 km, empty load weight: 1,510 kg, driver cabin: other, Vehicle location: Bovenden, Nwedpfx Ahjuc T Upeved Body: Salt spreader approx. 4m³ with 2x leach tank ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: ready for operation (used), functionality: fully functional, Control panel for salt spreader: - Küpper-Weisser / Pietsch - 12V connection - for 1-chamber salt spreader Receive all new vehicles by email - subscribe to our NEWSLETTER! Nedpfxsuk Hmce Ahvowd Errors and typing errors possible, subject to prior sale!

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, mileage: 1 km, driver cabin: other, Vehicle location: Bovenden, silo capacity 5m³, tank capacity 2450 ltr., (2 x 1225 ltr.), empty weight approx. 1545kg ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nodji Rmkajpfx Ahvewd - .

Year of construction: 2020, condition: reconditioned (used), Brand: Kuppersbusch Nwedpjwlm Ursfx Ahvjd Article number: FES 060 Dimensions WxDxH: 850x700x930mm Content: 60Liter Material: Stainless steel Connection value: 400V / 12.6 kW Year of construction: 2020

Condition: used, Year of construction: 1999, gearing type: other, first registration: 01/1999, color: orange, mileage: 1,001 km, empty load weight: 2,390 kg, loading space volume: 5 m³, driver cabin: other, Vehicle location: Bovenden, Nodpfevhh Iyox Ahvowd Superstructure: Wet salt spreader with a useful capacity of 5.0m³ and 2 brine tanks with approx. 2,000l, tank length 2,750mm, The spreader was taken out of service in April 2021. Spreader control V-Pad was installed during conversion (new truck). Dismantling to old control system possible without any problems, circuit diagram available. Operating instructions, spare parts list, workshop manual and declaration of conformity CE marking are available. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), mileage: 812,271 km, power: 320 kW (435.08 HP), first registration: 08/2015, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,170 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: AdBlue, central locking, cruise control, parking air conditioner, parking heater, spoiler, = Additional options and equipment = - Aluminium fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Roof spoiler - Windshield - Cab - Air suspension - Sleeper cab - Auxiliary heater = Notes = Daf XF440 SuperSpaceCab 6x2*4 Model year: 13-08-2015 Mileage: 812,271 km Chassis number: XLRASH4100G073990 License plate: 76-BGG-7 APK/TÜV valid until: 24-08-2026 DAF XF440 6x2*4 SSC 76-BGG-7 812,200 km Alcoas Steering axle 1/2/3 decks Lifting roof Swinging floorboards Remote control Night air conditioning Coffee maker 2015 3-deck cuppers, approx. 2002 = Further information = Nwedpfsywtuvsx Ahvod Technical details Number of cylinders: 6 Engine capacity: 10,837 cc Axle configuration Front axle: Tire size: 385/55R22.5; Max. axle load: 9,000 kg; Left tire tread: 50%; Right tire tread: 50%; Suspension: leaf suspension Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Inner left tire tread: 50%; Outer left tire tread: 50%; Inner right tire tread: 50%; Outer right tire tread: 50%; Suspension: air suspension Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Left tire tread: 50%; Right tire tread: 50%; Suspension: air suspension Weights Curb weight: 14,507 kg Payload: 13,493 kg Gross vehicle weight: 28,000 kg Functional Body make: ZF Maintenance, history and condition APK (general technical inspection): valid until 08.2026 Technical condition: good Visual condition: good Identification Registration number: 76-BGG-7

Condition: used, maximum load weight: 15,880 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 07/2014, total width: 2,500 mm, total height: 3,100 mm, * Spezialanhänger - Winterdienst- Blenkle IMS 3- Wechselsystem * Wechselaufbau Küpper Weisser * Full Wet * Solestreuer * Thermomat * IMSSN S00100 HFV * Aufbau BJ. 2014 * Aufbau 2165 kg Gewicht * 7 x Einzelbehälter * Einzelbefüllung * Zentralbefüllung * Zentralentleerung * Rundumlicht * Warnleuchten * Wechselfahrgestell mit BDF Aufnahme * Hersteller Blenkle Fahrzeugbau * Typ IMS 3 * Luftfederung * Mercedes Achse * 50 ziger Zugöse * Zugdeichsel höhenverstellbar * Zwillingsreifen Nwsdjyvwpzopfx Ahvod * 265/70R198,5 ca. 70-80% * 21000 kg GG * Behördenfahrzeug * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: good (used), mileage: 812,271 km, power: 320 kW (435.08 HP), first registration: 08/2015, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,170 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: AdBlue, central locking, cruise control, parking air conditioner, parking heater, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Rear working lights - Front working lights - Heated mirrors - Leaf suspension - Roof spoiler - Windscreen - Cab - Air suspension - Sleeper cab - Auxiliary heater = Notes = Daf XF440 SuperSpaceCab 6x2*4 - Cuppers 1-2-3 deck Livestock + Cuppers 3 deck trailer 2009 MY: 13-8-2015 / 18-2-2009 KM: 812271 XLRASH4100G073990 / XL9VA101092053008 76-BGG-7 / 83-WD-LH APK/TUV: 24 DAF XF440 6x2*4 SSC 76-BGG-7 812,200 km Alcoas Steering axle 1/2/3 decks Lifting roof Swinging floorboards Remote control Night air conditioning Coffee maker 2015 3-deck cuppers, approx. 2002 Cupper 3-deck trailer 83-WD-LH 02-2009 BPW axles Automatic doors Swinging floorboards Folding roof 3 decks Fans Remote control release = Further Information = Technical details Number of cylinders: 6 Engine displacement: 10,837 cc Nwedpfx Aheymaqnovsd Axle configuration Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 11,500 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: air suspension Rear axle 2: Tyre size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: air suspension Weights Unladen weight: 14,507 kg Payload: 13,493 kg Gross vehicle weight: 28,000 kg Functional Body brand: ZF Maintenance, history, and condition APK (MOT/TUV): valid until 08.2026 Technical condition: good Visual condition: good Identification Registration number: 76-BGG-7 Further information For more information, please contact VAEX The Truck Traders.

Condition: used, mileage: 482,715 km, power: 309 kW (420.12 HP), first registration: 03/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, loading space length: 7,244 mm, loading space width: 2,474 mm, loading space height: 2,339 mm, Equipment: air conditioning, navigation system, parking heater, * Multifunction steering wheel * Automatic climate control * Auxiliary heater (parking heater) * Navigation system * First sleeper berth * Rear-view camera * Refrigerator * Two-way radio ----* Adaptive cruise control * Lane departure warning * Brake warning system * Full air suspension ----* First deck Cuppers livestock body * Loading ramp Nwjdpfx Aewv A U Aehvjd * Partition grid * Remote control * Unladen weight: 10,460 kg * General Inspection (HU): 11.2025 * Safety Inspection (SP): 05.2026 -----Internal vehicle number: 11140 Errors & interim sale excepted WhatsApp support available! If you have questions about the vehicle or would like further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, mileage: 1 km, first registration: 05/2000, * mehrere Schneepflüge, Beilhack, Küpper Weisser, Drutzel, Schmidt zu Verkauf, Paketverkauf möglich * * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. Njdpfxox Im Uwj Ahvowd * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * * WhatsApp

Condition: used, mileage: 316,939 km, power: 132 kW (179.47 HP), first registration: 08/2010, overall weight: 8,600 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, parking heater, Body: - Küpper Weisser spreader - Model: STASF VES, year 2010 - ThermoMAT - Suitable for oil spill control - Storage boxes Equipment: - Cab: C (Compact) - Driver and passenger comfort seats, air-suspended - Automatic climate control - Additional air heater Eberspächer Airtronic D2 - Mechanical sunroof - Flame start system - Fuel tank: 200 L - 6-speed manual transmission Technology: - Rear-view camera - On-board computer MAN-Tronic - Electrically adjustable and heated exterior mirrors - Electric windows - ETA circuit breaker - Beacon lights Safety/Environment: - Rear axle differential lock - Engine brake - Electronic braking system MAN-Brakematic - Rear axle stabilizer - EURO 5 engine Miscellaneous: - German first delivery - 1 previous owner - Engine 4.6 L – 132 kW Diesel - Registration: previously self-propelled working machine 'traffic safety vehicle' - Payload 2,785 kg according to registration certificate - Perm. total weight 8.60 t Since 1972, your reliable partner for all automotive and commercial vehicle needs in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps approx. 200 vehicles in stock, including transporters, commercial vehicles, and construction machinery! Nwjdpswmx Aqsfx Ahved We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction equipment is welcome. If a new TÜV inspection is desired, we will gladly offer you this service through our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle can be arranged nationwide by our external partners at an additional cost. All information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical errors and data transmission mistakes. Listed equipment features may need to be verified separately. Subject to errors and prior sale.

Condition: used, first registration: 09/2009, color: orange, * Küpper Weisser Salzstreuer - Winterdienst- hydraulischer Antrieb Nedpfxsx Dn Rio Ahvjwd * IMSSN * E 35060HFS * Bj. 2009 * 6 cbm Inhalt * 1565 kg Leergewicht * Bedienpult * Dautelwechselsystem * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * * WhatsApp

Condition: used, 113m³ above-ground steel tank on steel supports Diameter: 3.10m Length: 15m Cylinder wall thickness: 8mm Front wall thickness: 12mm The tank has a hole in the top (visible in the photo), which we will weld. The following optional additions to the tank are priced separately: Applying an state hygiene institution approved coating Nodpfx Aow El Dlehvowd A DN50 float valve, or a DN100 float valve, including installation. The price depends on the float valve diameter. We have our own specialized trailer. Delivery costs depend on the destination.

Condition: used, color: orange, empty load weight: 430 kg, machine/vehicle number: 3658, We offer here a salt spreader from Küpper Weisser (int. number 3658). Type IMSSE J18018H Serial number: 130266 Nwsdpfx Ahjiv U D Hjvod Year of construction 2013 Unladen weight 430 kg The salt container holds approx. 1.8 m³, the spreading width and quantity can be conveniently adjusted on the control panel during operation. The spreader was mounted on a UNIMOG and used by us, but was carefully impregnated in our workshop before the winter service season, so that hardly any corrosion has occurred. It only has one minor defect, as the attachment of the spreading plate is broken and needs to be welded, which can be done in our workshop on collection. Otherwise, the machine is in good condition and can be used at short notice.

Condition: used, round bar steel 42 mm square edge steel 38 mm L-beam 110 x 10 mm cutting capacity 150 x 16 mm pressure 60 t hole punching press: throat 370 mm hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm Nwjdpfxowth N Hj Ahvod weight of the machine ca. 2,1 t dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: used, mileage: 10 km, first registration: 01/1994, Year of construction: 1994, Salt spreader structure for truck manufacturer Küpper-Weisser---- * Type STA HD Nsdpfji Sfmtox Ahvowd * Volume 4m² * Year of manufacture 1991 * Drive 1D90FS V01 * Includes tanks for brine left and right * Hydraulic drive Parts donor - selling all individual parts Also selling individual parts of it, set of support legs for sale Subject to errors and changes!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC Nwjdpfoyr Uguox Ahvsd The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 63320 € 1196.75 € 100 to 2550 mm Y1 / Y2 / X Achse 265 mm 2200 mm 450 mm 530 mm hydraulisch 180 mm/s 10 mm/s 120 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 100 l 11 kW 3800 mm 1670 mm 2850 mm 7800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis Nwedpfowiqmgox Ahvod R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray Nwjdpfxjyxqk Ds Ahvjd tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Nsdjvvkipopfx Ahvjwd

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable Nedpfx Ahjyxdwdsvjwd • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • Drive unit with 30 kW motor • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface