Used Upper Support for sale (15,371)

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW CONTAINER FOR AGGREGATE WITH COVER-UNCOVER, SINGLE REAR DOOR OPENING TILTING DOOR WATERPROOF - ROCK TANK. Also suitable for loading excavators. Rounded container reinforced with 600 mm hook, reinforcement at the front part's yield point, 200 mm beams reinforced in the central part (unloading point), larger rear wheels. Bottom resting on the beams with lateral support shelves. Rock split on the upper perimeter of the container REF. : 23-N-07 TYPE: inert C NEW: yes COVER: no OPENING: single tilt door OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.25 m TOTAL EXTERNAL WIDTH: 2.50 m INTERNAL FRONT SIDEBOARD: 1.50 m INTERNAL REAR SIDEBOARD: 1.30 m INTERNAL SIDEBOARD: 1.30 m MC: 18 WEIGHT: 2480 kg BOTTOM: 5 mm Psdjvkyzkspfx Ahcora WALL: 4 mm COLOUR: grey Errors and/or omissions excepted The prices shown do not include VAT. please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, The line consists of one Juki KE-3020L pick-and-place machine, one Juki FX-3 pick-and-place machine, one Kurtz Ersa HOTFLOW 2/12 reflow soldering oven and one Kurtz Ersa stencil printer, 1) Juki KE-3020L pick-and-place machine, 2) Juki FX-3 pick-and-place machine, placement speed - optimum: 0.049s/chip (74,000CPH), placement speed - IPC9850: 60,000CPH, component size: to 33.5mm (or diagonal length up to 47mm), placement accuracy: +/-0.05mm (Cpk ≥ 1), max. feeder inputs: 120 with 8mm tape feeders, max. PCB size: 50-410x50-360mm, length: 1650mm, width: 2650mm, height: 1530mm, weight: 3.28t, 3) Kurtz Ersa HOTFLOW 2/12 reflow soldering oven, conveyor system working width: 50-500mm, working width with PCB center support: 60-500mm, PCB clearance: +35/-20mm, conveyor speed: 20-200cm/min, conveyor height above floor: 820-950mm, pin and chain conveyor: 5mm edge clearance, cooling zone: water recooling system, 2 upper cooling modules, cooling medium: water / air, ambient temperature: 10-35°C, process length: 2450mm, heating zone: 1650mm, cooling zone: 800mm, inlet zone: 700mm, outlet zone: 700mm, process chamber width: 700mm, length: 3890mm, width: 1390mm, height: 1370-1500mm, weight: 1.4t, 4) Kurtz Ersa stencil printer. An on-site inspection is possible. Prsdpfxjzwfrwo Ahcea

Condition: good (used), Year of construction: 2014, functionality: fully functional, Immediately available, maintenance and safety inspection new as of July 30, 2026! Description Year of manufacture: 2014 Bending length [mm]: 1020.00 Press force [tons]: 36 Predpfxezrwnto Ahcea Control system: TRUMPF TASC 6000 Standard equipment Machine - Stable machine frame - Press beam - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 6 axes Tool clamping - Upper tool clamping, automatic - Lower tool clamping, automatic Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen Safety - Laterally pivoting safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting front and rear (LED) - 2 document holders - 2 storage consoles - 1 measuring tool storage Productivity-Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser) - Swiveling control panel - Bending line laser - Seat and standing aid - OCB – Operator Controlled Bending

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling Prsdpfjzv Sbiox Ahcsa - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 mm Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 1/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 68 mm bed width: 403 mm Prjdpfxszw E Edo Ahcja Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Podpfx Aettu Sgohcora Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Predpfx Aheylpvdjcja Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg !! Available for immediate sale !!

Year of construction: 1960, condition: ready for operation (used), Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible. Podpeylbtbofx Ahcsra

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Prsdpfxjzuzw Dj Ahcea Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe Prsdpfx Ahoy Saurscsa (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual Pjdpfezuyhhox Ahcera For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 1982, machine/vehicle number: 005-5216, Lg.No. 24586 Technical data: - max. working width 1030 mm - max. material thickness 3 mm - bending angle approx. 0 - 135 ° - lockable with end stop Pjdpfx Aov Hc A Nohcjra - upper beam is operated with a hand crank on the side - max. upper beam stroke 120 mm - max. bending beam adjustment 45 mm - bending process is supported by eccentric weight - space requirement approx. W 1750 x H 1120 x D 450 mm - weight approx. 620 kg

Condition: ready for operation (used), Year of construction: 2024, pressing force: 64 t, CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details. • Inspection possible: Yes, in Bulgaria • CNC control • Control system: E-Touch ET18 (E-Touch 18) • Programming: 2D graphical programming, CAD import, offline programming • Remote assistance: Yes • Automatic bending-process calculation: Yes • CNC axes: 4+1 (Y1, Y2, X, R + V motorized crowning) • Main technical specifications • Distance between columns: 1,980 mm • Throat depth: 300 mm • Ram stroke: 160 mm • Maximum open height: 370 mm • Repositioning accuracy: ±0.05 mm • Fast approach speed: 200 mm/s • Bending speed: 10 mm/s • Return speed: 180 mm/s • Main motor power: 7.5 kW • Axes / backgauge • Y1/Y2: Fully synchronized • X-axis: CNC controlled • R-axis: CNC controlled • V-axis: CNC motorized crowning • Backgauge: Servo controlled • Main components • Hydraulic system: Bosch Rexroth • Main motor: Siemens • Electrical components: Schneider Electric • Ball screws / linear guides: HIWIN • Linear scales: GIVI (Italy) Psdpfxozu Swns Ahcera • Tubing / connectors: EMB (Germany) • Sealing rings: NOK (Japan) • Hydraulic pump: Sunny (USA) • Safety and compliance • Motor overload protection • Electrical leakage protection • CE safety standard Additional equipment • 1 set upper punch (heat-treated 42CrMo) • 1 multi-V lower die (heat-treated 42CrMo) • Quick-release upper tool clamps • 2 front support arms • Foot pedal with emergency stop • Safety fence Technical Specification Bending Length 2500 mm

Condition: used, Year of construction: 1993, COMI/RIGO 0599 inner liner thermoforming machine, SL200x90 NG DX Machine Specifications Forming & Tool Dimensions Maximum mold base dimensions: 2000 × 900 mm Minimum mold base dimensions: 800 × 480 mm Maximum frame interior dimensions: 2000 × 900 mm Maximum mold height: 800 mm Maximum molded part height: 550 mm Maximum sheet stack height: 1000 mm Maximum sheet support stack height: 180 mm Heating System Upper heating power: 89 kW Lower heating power: 78 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Motors & Drives Oil pump motor power: 30 kW Vacuum pump motor power: 12 kW (3 × 4 kW) Sheet transport motor power: 1.6 kW Transport regulation motor power: 1.1 kW Sheet moving motor power: 0.25 kW Fan motor power: 0.50 kW (2 × 0.25 kW) Pyrometer motor power: 0.18 kW Discharge transfer motor power: 0.70 kW Single-blade motor power: 5 kW Cooling & Utilities Chiller power: 78 kW Auxiliary equipment maximum consumption: 3.87 kW Electrical Requirements Maximum installed power: 399 kW Vacuum System Vacuum pump capacity: 570 m³/h (3 × 190 m³/h) Vacuum tank capacity: 4,000 L (2,000 + 2,000 L) Water Requirements Water inlet temperature: 12-20 °C Water inlet pressure: 2-3 bar Closed-circuit water maximum flow rate: 130 L/min Pneumatic & Hydraulic Requirements Podpszumuuefx Ahcsra Pneumatic operating pressure: 6 kg/cm² Hydraulic operating pressure (min/max): 110 / 140 kg/cm² Mechanical Characteristics Upper die clamping force: 9,000 kg Lower die clamping force: 9,000 kg Oil quantity for operation: 480 L Air consumption (movement = 700, cooling = 800): 1,500 N litres/cycle Machine weight: 25,000 kg (25 tonnes)

Condition: good (used), Year of construction: 2006, functionality: fully functional, Press force: 50 t Bending length: 1275 mm Frame width: 1040 mm Stroke: 215 mm Usable installation height: 385 mm Overhang: 420 mm Standard equipment: - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC back gauge with rack and pinion drive for the X and R axes - Safe shifting of the gauge fingers from the front - Upper tool clamping system "New Standard Clamping II" manual - Lower tool holder for EV dies, clamping hydraulic, shifting programmable (2 positions) - Control system TRUMPF TASC 6000 - Safety device consisting of side and rear protective doors - Control cabinet air conditioning - Network compatible Optional equipment: - 2 additional gauge fingers, attachable - Upper tool clamping hydraulic - Bendguard - Roll protection cover at the rear - Support console - Preparation for ACB Psdpfx Aszt R Hrjhcjra

Condition: used, Year of construction: 2001, Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Predpfx Ahek Abckecja Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with Arch and Straight GF 7000-650-500 RA1368 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7.000 mm (riser 4080mm + bow 500mm + upper straight 2420mm) Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Predpfok Aa S Tex Ahcsa Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Pitch: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm Predpfx Ahezrvdgscja No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm Pedpozrzt Hofx Ahcsra throat 500 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual

Condition: like new (used), Year of construction: 2025, operating hours: 600 h, Engine: CUMMINS - US EPA Tier 4 final, water-cooled, with electrically heated water separator with 24V fuel pre-filter and air filter pre-cleaner - Diesel particulate filter (DPF) - Eco-switch for diesel engine - Cooling fan with reversing function for cleaning the radiators - Automatic central lubrication for attachment and slewing ring raceway - Pinion-tooth lubrication for slewing ring - Emergency control to ensure machine availability during restricted operation By bypassing the main functions - Joystick steering Undercarriage Mobile undercarriage with 4-point support. All-wheel drive Solid rubber tires 12.00-20 (8-way). Cabin Adjustment Cabin adjustment TYPE 270 for SENNEBOGEN MAXCAB. Hydraulically liftable up to approx. 2.7 m Cabin and Equipment MAXCAB Industrial with sliding door including a one-piece, straight windshield with armored glass. Armored glass cab roof window Cab protective grille at the front and top Automatic climate control Air-suspended comfort driver's seat with climate control, seat heating, and headrest Fully adjustable multifunctional armrests for the driver's seat 2-inch safety belt Radio/USB/MP3 and Bluetooth function Position slewing gear brake Interior sunshade for roof hatch and windshield Uppercarriage options Additional counterweight 0.6 t SENNEBOGEN Hydro Clean filter Safety railing Platform next to the cab with railing (bolted) Railing on the uppercarriage, foldable for transport Work equipment Type K18 transfer equipment consisting of: Compact boom 10.1 m and stick 7.9 m Lift and stick cylinders with end-of-stroke damping Hose rupture protection for lift and stick cylinders Limit switches for lifting/lowering and boom on/off Boom damper reduces sway and dampens abrupt movements. SENNEBOGEN 20 kW, 230 V generator system for diesel machines, 100% duty cycle, maintenance-free Safety circuit against short circuits and overloads, insulation monitoring 4-pole generator, hydraulically driven, can be switched off when not in generator mode without hydraulic power loss, control and display unit in the cab. Basic lighting package: Two H4 recessed headlights in the upper frame at the front left and right, two taillights and two headlights at the front left integrated in the cab roof. LED work light with magnetic attachment and 5 m cable for flexible positioning in the maintenance area. Prsdjwb Dnzopfx Ahcsa Camera system - Basic package with 2 cameras includes: 1 7" color monitor with 4-way split screen, expandable to a maximum of 4 cameras, 2 color cameras with a 115° field of view for the rear view camera and the right side of the machine. Additional lighting package 1: One spotlight mounted on the uppercarriage One LED work light Additional lighting package 2: Two LED spotlights on a pole Two LED spotlights on the boom One LED spotlight on the counterweight Rotating beacon

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Predpfx Ajk Aa U Ishcea Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending conveyor GF 6330-650-500 RA1476 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6330 mm (ascending conveyor 2930mm + arch 400mm + upper straight 2000mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Pedek Abb Uepfx Ahcera Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2022, operating hours: 731 h, pressing force: 51 t, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, number of axes: 7, This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details. • Drive: Dynamic electromechanical Torque Drive • Capacity and dimensions: • Free upright clearance: 1,305 mm • Usable installation height: 385 mm • Throat depth: 250 mm • Working height: 1,150 mm • Machine frame: Stable welded frame • Axes and backgauge: • CNC axes: 7 (Y, X1, X2, R1, R2, Z1, Z2) • Backgauge: 6-axis independent system (X1/X2/R1/R2/Z1/Z2), both units move independently • Backgauge features: Carbon-fiber fingers, hardened reference surfaces, helical rack Z-drive, flexible positioning • Travels / working range: • Y stroke: 215 mm • X travel: 240 mm (max backgauge range 500 mm) • R travel: 153 mm • Speeds: • Y rapid/return: 220 mm/s • Y working: 25 mm/s • X: 1,500 mm/s • R: 750 mm/s • Z: 2,200 mm/s • Positioning accuracy: • Y: 0.002 mm • X: 0.02 mm • Z: 0.02 mm • Crowning: • CNC-controlled crowning, automatic compensation via drive • Crowning drive integrated in the table • Suited for multi-station bending • Y-axis / press beam: • Inductive Y measuring system • Dynamic spring-back compensation with automatic force-based correction • Hardened adjustable guide strips • Control system: • TRUMPF Touchpoint TruBend, 21.5" TFT Full HD (1920×1080) • Intel Core i5 2.7 GHz dual-core, Windows Embedded Standard 7 • Realistic 3D visualization, TRUMPF technology database • User management with Standard/Expert/Administrator levels Prsdpfx Ahjzu S Uajcja • 10 user access cards included • Data interfaces: • USB, RJ45, Ethernet 10/100 Mbit/s • Central Link, OPC UA • Internet teleservice / remote diagnostics • Tool clamping and setup: • Automatic TRUMPF upper and lower tool clamping (self-centering, hardened) • Fast segment change • LED Tool Indicator integrated in upper clamping (shows setup positions/next bend station) • Safety: • Automatic BendGuard (part of Productivity Package Plus) • Optoelectronic safety system with automatic tool-height setting • Allows max permissible Y speed with foot pedal • Automatic adjustment, movable out of working area for side processing • Electronically monitored side safety doors • Electrically operated lift-up rear doors • Emergency stop • Transport securing devices • CE marking • Ergonomic package: • Front support table • Front and rear LED work-area lighting • Support for seated/standing operation • Document shelf • Drawer for measuring instruments Additional equipment • Measuring equipment: • Digital angle gauge • Digital caliper • 90-degree edge square • 1x TecZone Bend license • Wireless 2D code reader with Bluetooth connection Technical Specification Bending Length 1530 mm

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Prodpezuyh Iofx Ahcsa Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: ready for operation (used), Year of construction: 2000, Max. format X/Y: 320mm/520mm. Thread guiding from front and rear thread spools via thread guide rods, thread tensioning device and thread break monitoring, rear platform height-adjustable by handwheel, adjustable lateral support knives, adjustable signature stops for head and foot side, foot-side stop spring-loaded, signature delivery wheels with DC drive, speed continuously adjustable via potentiometer, lower delivery wheel stationary, upper delivery wheel oscillating, signature transport via adjustable transport chain with plastic transport elements, book delivery height-adjustable, lateral knives at the book delivery adjustable. Documentation available. Inspection possible by arrangement. Pedpfx Aezuktzjhcsra