Used Upper Support for sale (15,372)

Condition: new, mileage: 450 km, power: 220 kW (299.12 HP), fuel type: diesel, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specifications available upon request. * Truck with Campana Safe 2020 body and matching Campana Safe through-loading trailer (body year 2019) * Fully galvanized steel structures, designed for the concealed transport of either 2 cars, 2 SUVs, or one panel van * Fixed front stacking platform and hydraulically lowerable rear platform with infinitely adjustable hydraulic supports Prsdpfxey N H Sxe Ahcja Truck equipment: * Wheelbase: 4,760 mm * S-cab, Classic Space, extended * MB 121-2c PTO * Air suspension on front and rear axles * Front axle upgraded to 5.3 t Body (year 2019): * Plywood box body with roller shutter door at the rear * One double-wing side door (sandwich design) on each side, clear width approx. 2,500 mm, with internal locking rods and stainless steel handles * One-piece, smooth GRP roof, white, semi-transparent * Front wall made from 20 mm thick plywood * Side walls made from 20 mm thick plywood * Box body and cover panels painted RAL 3002 Carmine Red * Galvanized perforated steel catwalks on lower and upper loading levels, fitted with rubber strips above and below for splash protection (hole pattern compatible with KTT and Lohr wheel chocks; concealed holes by cross beams in overlapping areas approx. every 3 m) * Closed central lower platform made from hot-dip galvanized steel checker plate * Closed central upper platform made from 3.5-5 mm aluminum checker plate * Loading and drive-over ramps for short-coupling system * Undermounted cross member for quick-coupled trailer, painted in chassis color, with external operation * Tow hitch with remote indicator for 12 t central axle trailer * 2 plastic toolboxes (W x H x D: 600 x 400 x 500 mm), lockable, with folding lid * Wheel chock recesses on the rear stacking platform, left and right, with 3 chocks per recess (removing chocks allows loaded vehicles to be lowered in height) * 1 pair of aluminum insert ramps with securing knob * Gear-type hydraulic pump * Cable winch Trailer equipment (year 2019): * 1 pair of 5.5 t Gigant low loader axles with maintenance-free compact bearings * WABCO EBS air brake system * WABCO electronic air suspension with control unit in truck cab (permits raising/lowering of trailer air suspension from cab) * 235/75 R 17.5 single tires * Plywood box body with hydraulic rear loading flap and front portal with roller shutter door * One double-wing side door per side, sandwich design, clear width approx. 2,500 mm * Additional single-leaf side door, front left, with internal locking rod and stainless steel handle * One-piece, smooth, GRP roof, white, semi-transparent * Side walls made from 20 mm thick plywood * T90 rear flap made from high-strength aluminum alloy, hydraulically lowerable, with aluminum perforated running boards left and right in wheel tracks * Box body and cover panels painted RAL 3002 Carmine Red * ProStripe LED interior lights, 6 pieces, each 1,220 mm long, fully wired, with switch in box body * Removable jack, pin-secured to drawbar * Galvanized perforated steel catwalks on lower and upper loading levels, with rubber strips above and below for splash protection (hole pattern compatible with KTT and Lohr wheel chocks; concealed holes

Condition: good (used), Code: 0360 Brand: GMC - ITALY Model: KGS 400/E - CE Standard Manual vertical panel saw with scoring unit for cutting panels, furniture, customer made furniture, kitchens, plastics, composite materials, aluminium and various – CE Standard Technical specifications: Cutting length 3200 mm Cutting height 1900 mm Cutting thickness 50 mm Blade diameter 250 mm Hole 20 Motor 4 Hp Scoring unit for chip-free cutting - Blade diameter mm 110 Hole 20 Circular saw shaft speed 4800 rpm Scoring saw shaft speed 7000 rpm Retractable tilting intermediate support, half-length Automatic mechanical moving frame Double lower and upper measuring index for horizontal cuts Predpfxjy Du Nze Ahcja Overall dimensions of assembled machine mm 5100 x 1100 x 2800 h Overall dimensions for transport: Frame mm 5100 x 460 x 2250 h + Beam mm 2900 x 850 x 850 h Weight kg 450

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm Podpfx Aey Nb Tkohcsra 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: used, Bystronic Xpert 250x4100 - CNC Press Brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2D and 3D graphics control, ergonomic operating terminal with 15-inch color monitor - 8 axes (Y1, Y2, X, R, Z1, Z2, A1, A2) - AKAS laser safety device, manually adjustable in height - Hydraulic crowning - Air bending - Radius bending - Without tooling - Includes operating manual - Year of manufacture: 2007 Predpfozizybex Ahcoa Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installed height (clearance between lower and upper beam): 550 mm - Distance between side supports: 3750 mm - Overhang: 400 mm - Back gauge area: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - R-axis travel: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-working speed: 1 - 10 mm/s - Y-working speed for robot operation: 1 - 12 mm/s - Y-return speed: 150 mm/s - Crowning: hydraulic - Adjustable support arms: 750 mm - Maximum surface pressure without wear strip: 100 N/mm2 - Maximum surface pressure with wear strip: 120 N/mm2 - Oil capacity (tank volume): 610 l - Noise emissions: 74 dB(A) - Main motor power: 22 kW - Voltage: 3x 400 V / 50/60 Hz - Transport dimensions WxHxD: 5200 x 3200 x 2100 mm - Weight: 19200 kg

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA Psdezi Duhjpfx Ahcjra - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, 1 cylindrical, vertical stainless steel tank, used Capacity: 150 cbm Order number: 4326 Pjdpfjy Atvqjx Ahcjra Material: V2A Internal weld seams ground smooth for food contact Dimensions: 3,400 mm internal diameter 3,600 mm external diameter 16,500 mm cylindrical height 800 mm upper bottom Approx. 17,300 mm overall height Design: Cylindrical, vertical with a lower, inwardly curved conical bottom, supported by concrete with an upper conical bottom Propeller agitator in the cylinder at the bottom, installed at an angle, 15 kW, 960/min Insulation around the cylinder and upper bottom Cover completely welded Connections: 1 manhole 320 x 420 in the cylinder Vent Ø600 mm with hood in the upper bottom with a spray head, removable Condensate line drawn down laterally CIP line DN 65 drawn down laterally to operating height, tapering to DN 40 1 cable duct Ø25 drawn down to operating height as well as a measuring connection in the upper bottom 1 x measuring connection 1 x DRD flange 1 x sampling point in the cover Outlet at the lowest point DN 100

Condition: as good as new (ex-display), Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Psdpfjyyqnfex Ahcera Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Pedpfx Ahjx Nuf Hocjra Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: used, Year of construction: 1974, Vulcanizing Press Mapelli T60 Manufacturer: Mapelli Type: T60 Year of manufacture: 1974 Operating voltage: 380 V Frequency: 50 Hz Control panel: Integrated temperature controllers and operating modules Heating control: Three separately adjustable temperature zones Main switch: Present Manual/automatic operation: Selectable via control panel Safety features: Emergency stop Pressure display: Analog manometer Press area: Vertical closing unit with upper and lower heating plates Construction: Robust steel design Application: Vulcanizing and pressing of molded parts The Mapelli T60 vulcanizing press is a heavy-duty industrial press designed for reliable and uniform vulcanization processes. The robust housing made of solid steel ensures high stability and longevity. The clearly arranged control panel allows for precise adjustment of heating temperatures, operating modes, and pump functions. Three digital temperature controllers enable precise regulation of the heating plates, ensuring reproducible results during vulcanization. The vertical pressing mechanism offers a solid support and closing unit, ideal for molded parts and various materials. The machine features an integrated safety circuit including emergency stop, as well as an analog pressure gauge to monitor the pressing process. Due to its industrial design, the Mapelli T60 is excellently suited for continuous operation and offers an economical solution for companies requiring robust vulcanizing technology. Pedpfex Exndsx Ahcera No guarantee is given for the accuracy, completeness, or currentness of the information provided.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 19800 € 380.16 € 1550 mm 6 mm 30 1/min 2.3 ° 750 mm 7,5 kW 800 mm 530 mm 1855 mm 2220 mm 1630 mm 1230 mm 2900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade Pjdpfx Ahjyg N Szocera 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Pedpfxeyb Rpdj Ahcjra The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 29000 € 553.9 € 2050 mm 4 mm 4 mm 3 mm 3 mm 2 mm 130 mm 130 mm 130 mm 5 m/min 2,2 + 1,1 kW 3800 mm 1150 mm 1110 mm 2450 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH Prjdpfx Asyb Sy Dohcsa OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 46300 € 884.33 € 2050 mm 11 mm 11 mm 9 mm 9 mm 7 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 4080 kg 4 rolls Prjdpfx Ahjyb Szuocsa Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Schroder, controller model: POS 2000, working width: 3,200 mm, folding beam adjustment: 300 mm, installation height: 1,737 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, back gauge adjustment: CNC-controlled, overall weight: 4,380 kg, total length: 4,568 mm, total width: 2,450 mm, total height: 1,737 mm, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, 2006 Schröder SPB 3200 x 3.0 CNC Folder – POS2000 Control – Very Good Condition Machine Manufacturer: Schroder Machine Model: SPB 3200 x 3.0 CNC Folder Machine Type: CNC Sheet Metal Folder Year: 2006 Condition: Very good High-Quality Used CNC Sheet Metal Folder for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2006 Schröder SPB 3200/3.0 CNC Folder, a high-precision universal sheet metal folding machine from one of Europe’s most respected manufacturers. This machine is in very good condition and is fully equipped with sharp tooling, box & pan tooling, and extra bending rails, making it ideal for both standard and complex folding applications. The control screen has been upgraded to a larger display, improving visibility, usability, and operator comfort. Pjdpfxjyakn Rj Ahcora Key Features & Benefits Schröder SPB 3200/3.0 CNC Folder 3200 mm working length 3.0 mm mild steel capacity Schröder POS2000 CNC control Upgraded large control screen Includes extensive tooling package Rear roller support table fitted Heavy-duty industrial build Excellent accuracy & repeatability Ideal for fabrication, HVAC, cladding & precision sheet metal work Included Tooling & Equipment Rear Roller Support Table Box & Pan Folding Tooling Sharp Sheet Metal Folding Tool Extra Bending Bars / Rails This tooling package allows for maximum flexibility, from straight folds to boxes, pans, trays, and complex profiles. Technical Specifications – Schröder SPB 3200/3.0Machine Type: Universal CNC Sheet Metal Folder Year: 2006 Control: Schröder POS2000 Condition: Very Good Capacity Usable working length: 3200 mm Maximum sheet thickness: 3.0 mm Beam & Adjustment Upper beam daylight: 300 mm Vertical adjustment of bending beam: 300 mm Drive & Power Upper beam drive: 4.4 kW Bending beam drive: 4.4 kW Nominal power: 9 kVA Pneumatics: 6 bar Machine Dimensions Machine length: 4568 mm Machine width: 2450 mm Machine height: 1737 mm Machine weight: 4380 kg Ideal Applications Sheet metal fabrication HVAC ducting & panels Architectural metal & cladding Enclosures, trays & cabinets General engineering & contract folding Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines inspected & honestly described Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Psdpfx Ahjygkuwjcora Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH CS-100, a 100-ton capacity cement silo, can be safely used in concrete plants, block production facilities, and various ground applications thanks to its high durability and long-lasting structure. This model, which can be produced in either bolted or welded types according to customer requirements, offers easy on-site installation. The bolted version, when produced in two sets, can be transported with just one 40 ft OT container or truck, minimizing logistics costs. The CS-100 is designed with ease of use and safety in mind. The silo features a cement filling pipe, internal and external manholes, a maintenance platform, safety guards, a pressure relief valve, and special roof flanges for the air filter. It is also equipped with a conical flange system for butterfly valve connection. It can be delivered with optional cement screw conveyors, upper-lower level indicators, air fluidization nozzles, and manual discharge valves. Bolted silos are manufactured with high precision using laser cutting and drilling technology. Static and mechanical calculations are performed using ANSYS Workbench CAE software, ensuring deformation-free operation even under a 100-ton load. To increase corrosion resistance, one coat of anti-corrosive primer and two coats of epoxy paint are applied to the silo surface. CS-100 - 100-Ton Cement Silo Technical Specifications Podpexpi Iyofx Ahcsra Silo Capacity: 100 tons (78 m³) Silo Height: 18,920 mm Silo Diameter: Ø 3060 mm Number of Silo Legs: 4 Silo Outlet Diameter: Ø 300 mm Number of Components: 120 Silo Weight: 8,000 kg Silo Leg Material: 219x5 mm Steel Pipe Silo Leg Supports: NPL 80 mm Metal Sheet Silo Leg Plates: 20 mm Metal Sheet Conical Part Support Material: 100 mm Steel C Channel Conical Part Material: ST-37 - 6 mm Metal Plate Silo Body Material: ST-37 - 5 mm Metal Plate Silo Top Cover Material: ST-37 - 4 mm Metal Plate Filling Pipe: 4" Steel Pipe (Up to Silo Foot) Internal Manhole: Available External Manhole: Available Guardrail on Silo Roof: Available Maintenance Platform: Available Structural Analysis: Production Process Based on Approved Projects Why Choose the CS-100 Cement Silo? At CONSTMACH, we combine high engineering standards, quality control steps, and customer-focused solutions in all our production processes. The CS-100 model stands out with its advantages of safe storage, easy transportation, long-lasting surface protection, and low maintenance costs. Thanks to our extensive service network and spare parts support, you will have made the right choice to increase your business's efficiency. What Does Constmach Do? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min Podjxmaktopfx Ahcera spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - EMERGENCY stop button - Operating instructions

Condition: used, mileage: 267,393 km, power: 390 kW (530.25 HP), first registration: 10/2018, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: automatic, emission class: euro6, loading space length: 5,600 mm, loading space width: 2,320 mm, loading space height: 930 mm, Equipment: ABS, air conditioning, crane, parking heater, Mercedes-Benz 3253 Flatbed + HIAB 302 Crane 8x2-4 (HAD) Suspension: Leaf-air Wheelbase: 5.20 m HIAB Crane Type: X-HIPRO 302 E-6 6x Hydraulic extensions 2x Hydraulic supports 1x Remote control 5th & 6th function with rotator Flatbed Length: 5.60 m Width: 2.32 m Height: 0.93 m (from ground to upper edge 1.20 m) Pedpfx Aoyncwyjhcera Equipment: - Engine brake - Digital tachograph - Leather seats + seat heating - 1x Bed - Cool box - Lift and steering axle - Hill start assist - Radio/media/telephone - Rear view camera - Side camera - Electric windows - Glass roof - Sun visor - Hands-free system - Microwave - Trailer coupling (air, ABS, electrical connection) We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 40900 € 781.19 € 2050 mm 10 mm 10 mm 8 mm 8 mm 6 mm 200 - 220 mm 200 - 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support Predpfx Ahjynmyfjcea NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 14 - 16 Wochen ab Auf Italien 38000 € 725.8 € 100 to fix 1250 mm 500 mm 780 mm 1500 mm 25 mm/s 10 mm/s Prsdpoypbutjfx Ahcsa 4 mm/s 1300x600 mm 1250x400 mm 2400 mm 1200 mm 2450 mm 2450 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the rear side Safety light guard ALTERNATIVE: Version S (semiautomatik) € 30.000,00

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 260 mm, throat depth: 410 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19, working width: 3,100 mm, bending force (max.): 160 t, distance between stands: 2,550 mm, control type: CNC control, degree of automation: automatic, Baykal APHS PRO 31160 CNC Press Brake The Baykal APHS PRO 31160 is a CNC-controlled press brake with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser protection (AKAS / LCII), and a CNC-controlled crowning table. Operation is via a Cybelec 2D CNC control unit. Technical specifications: Press force: 160 t Bending length: 3,100 mm Bending length between uprights: 2,550 mm Throat depth: 410 mm Table height: 870 mm Max. ram stroke: 260 mm Motor power: 15 kW Oil tank capacity: 180 l The 2-axis backgauge (X-R) is driven by AC servo motors and provides a positioning accuracy of ±0.03 mm. Travel range: X = 1,000 mm; R = 160 mm; travel speed: 330 mm/s. Two laterally adjustable stop fingers are included. Equipment: - Cybelec 2D CNC control Podpfx Aheyrf Upjcjra - Fiessler AKAS / LCII laser safety - Automatic motorized crowning table (WILA system) - Segmented upper tooling, Amada system - Manual quick-release clamping system Promecam / AMADA - 2 front sheet supports, laterally adjustable - Central lubrication - Operating hours counter - CE compliance Machine details: Year of manufacture: 10/2025 Serial number: 31865 Dimensions (L×W×H): 3,820 × 1,800 × 2,700 mm The machine is in stock and available for immediate delivery. Warranty: 12 months for single-shift operation.

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 160 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 160 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 13800 kg range L-W-H 5150 x 2250 x 3000 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - Universal die block - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Prodpfjxaathox Ahcea

Condition: new, functionality: fully functional, Year of construction: 2024, MOSER Hydraulic Guillotine Shear Model: HGL 3106 Stock machine Serial No.: 30603 Year of manufacture: 10/2024 Specifications: - Swing beam design - Upper blade: Two cutting edges - Lower blade: Four cutting edges - Suitable for single and continuous stroke operation - Motorized blade gap adjustment - Motorized backgauge, 750 mm with ball screw spindles, foldable, positionable via NC controller, CYBELEC, model: CybTouch 8 W - Fixed angle stop with scale and foldable stop cam - Worktable with support plates and support balls integrated into the table - Two front support arms Prodpfx Ahjxgtq Tecoa - Finger guard with light barrier - Side and rear safety covers - Cutting line illumination - Technical documentation - CE compliant - Colors: * RAL 7015 – Slate grey * RAL 7035 – Light grey * RAL 3003 – Ruby red Technical Data: Sheet thickness ≤ 450 N/mm²: 6 mm Sheet thickness ≤ 700 N/mm²: 4 mm Cutting length: 3,060 mm Cutting angle: 1.6° Main motor: 11 kW Number of hold-downs: 17 pcs Strokes per minute: 20 pcs Oil tank: 160 liters Usable backgauge measuring range: 750 mm Backgauge positioning motor: 0.37 kW Dimensions (L x W x H): 4,000 x 2,200 x 1,700 mm Weight: 5,500 kg

Condition: new, Press force: 300 t Bending length: 4000 mm Distance between uprights: 3250 mm Overhang: 400 mm Installation height: 590 mm Stroke: 220 mm Return stroke speed: 80 mm/s Working speed: 8 mm/s Retraction speed: 80 mm/s Drive power: 22 kW Dimensions L x W x H: approx. 4150 x 1850 x 3100 mm Weight: approx. 20,000 kg Accessories / Special features: • CNC control Cybelec Cybtouch 12 P for Y1, Y2, X + automatic crowning o Simple operation, more efficient bending, and powerful functions o Touchscreen with bright colors Prodpfxegiudxo Ahcja • 5 x 800 mm upper tool PM 1, slightly bent, R=0.8 mm, pressure load 100 t/m, tip 88° • Universal die 95 x 95 mm with multiple V-openings • Laser safety curtain FISSLER on the right and left on the front side panels • Automatic hydraulic crowning device in the lower beam • Back gauge with linear guides • 3 front support arms • Foot pedal • Painting: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 • Operating manual • CE conformity Delivery time: approx. 2-3 months after receipt of order plus pre-carriage costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Pressing force: 40 t Bending length: 1270 mm Distance between uprights: 980 mm Overhang: 200 mm Installation height: 320 mm Stroke: 100 mm Working speed: 10 mm/s Drive power: 4 kW Dimensions L x W x H: approx. 1950 x 1450 x 2100 mm Weight: approx. 3200 kg Accessories / Special features: • Manual control for the motorized ram depth and backstop o Ball screw spindles o Fine adjustment via handwheel • Upper tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly curved, R = 0.8 mm, pressure load 100 t/m, tip 88° • Universal die 50 x 50 mm with multiple V-openings • Backstop with ball screw spindles, length = 600 mm • Only one working speed of 10 mm/s for all vertical movements, therefore no light barrier is required! • Front support arms • Control pendant • Painting: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 • Operating manual • CE conformity Delivery time: approx. 2-3 months after order receipt Pedpfx Aegiud Hohcsra plus pre-carriage costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel