Used Universal Machining Centre for sale (66,407)

Condition: used, machine/vehicle number: 008439, X axis working area: 3100 mm Dedpfx Adsyngzcsasur Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 8.5 KW Number of controlled axes: 4 axes Total number of tool changer positions: 18

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Dedpfoyzyrvsx Adaeur Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Djdoygx Hnopfx Adajur Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: Sinumerik 828D, _____ Description: Year of manuf. : 2023 Control : Siemens Sinumerik 828D Speed : 12000 rpm Movement X/Y/Z : 900/460/520 mm Tool holder : BT40 General: Year of manufacture:2023 Control system:Sinumerik 828D X/Y/Z travel:900/460/520 mm Speed:12,000 rpm Tool holder:BT40 Spindle: Technology:Belt spindle Speed:12,000 rpm Power:18 kW Torque:117 Nm Rapid traverse X/Y/Z:36/36/30 m/min Tool holder:BT40 Tool magazine: Technology:Chain magazine (ATC type) Number of stations:30 Work table: Clamping surface:1050 x 460 mm Table load capacity:600 kg Dujdsyzv Rhspfx Adajr Features/accessories: Chip disposal:Chip conveyor Coolant supply:IKZ system Setup operation:Electronic handwheel Other:Spray gun

Year of construction: 1989, condition: used, Hermle Universal Milling Machine Type UWF 801 working range longitudinal X axis 500 mm transverse y axis 430 mm vertical Z axis 400 mm clamping surface 800 x 220 tool holder SK 40 spindle motor 3 KW Duedpfx Adoihqatsasr quill stroke vertical 80 mm Control TNC 114

Year of construction: 1983, condition: used, Universal tool milling machine Hermle Type UWF 700 year of manufacture 1983 table 700 x 285 mm travel X / Y Z 400 / 290 / 380 mm mounting SK 40 spindle speed 40 - 2000 rpm quill stroke 63 mm drive power 2,2 kw Digital display Dedpfx Adjlqx Azeaeur counterholder weight 1500 kg

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: Duodpfx Aewmwrdsdaor - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Year of construction: 1981, condition: used, Make cover Type FP 4 Table: dimensions 1000 x 470 mm longitudinal movement X - axis 700 mm transversal movement Y - axis 400 mm vertical movement Z - axis 450 mm projection spindle 50 450 mm spindle mounting ISO 40 Number of spindle speeds 18 Spindle speed range 31,5 1600 rpm Number of revolutions horizontal spindle 18 pcs. Speed range horizontal spindle 31,5 1600 rpm Weight machine 2000 kg Duodpeihp U Dofx Adaer feeds X Y Z axis 18 pcs 10 500 mm/min Accessories milling head with quill Table 1000 x 470 mm

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm Duodpfx Aoyzt Dljdajr tool taper SK 40 number of tool places 30+190 Pos. A-axis ° C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 22.465 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Djdpeyzt A Uefx Adaour Prior sale is reserved.

Condition: used, Year of construction: 2002, travel -x axis 880 mm travel -y axis 630 mm travel -z axis 630 mm control HEIDENHAIN - TNC 426M number of spindle speeds 12.000 U/min numbers of positions in the tool changer (2 x 16) 32 Tool bore SK 40 surface area 1.250 x 700 mm table load 600 kg Milling machining centers - universal | DMG - DMU 80T equipped with B axis Dsdpfx Adeyzt Aueaour The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 80 T | 80-T

Year of construction: 1998, condition: used, ID No.: F40205, T-slot clamping table: approx. 4,200 x 960 mm; HEIDENHAIN control; chip conveyor KNOLL 200 S-1/50, year of manufacture: 1997, serial no.: 33897; belt filter KNOLL VRF 150, year of manufacture: 1998; hydraulic unit; control cabinet; cooling system BKW DL32V/4519-1KKSRZP, total machine length: approx. 10 linear meters. Duedpeyzthqefx Adaor

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 Dedotq Nlcspfx Adasur *

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg Dsdpfxoym Smbs Adasur - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° - weight: approx. 310 kg - one fixed table - dimensions: 1000 x 600 mm - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display increment: 0.001° - Weight: approx. 310 kg - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Duedpfx Adoym Sd Tjaer Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 71.255396, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: MILLPLUS, total height: 2,700 mm, total length: 6,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 900 mm, overall weight: 10,000 kg, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, DECKEL MAHO DMU 80 P Universal Machining Center - Operating voltage: 400 V Dedpfx Adoym Rk Soaeur - Frequency: 50 Hz - Rated current: 80 A - Table with 9 T-slots - Tool holder: SK 40 The machine is equipped with a 30-position tool changer, including the tool holders visible in the photos within the tool changer, as well as chip conveyor and coolant system. Note: The machine vice shown on the clamping surface is not included in the scope of delivery! Note: The item must be collected between 21/04 and 30/04/2026 at a bindingly agreed appointment. FCA D-96257 Marktgraitz – loaded onto truck

Condition: like new (used), Year of construction: 2018, operating hours: 1,294 h, functionality: fully functional, Röders RXP 601 DSH – 5-Axis High-Precision Milling and Grinding Center Machine hours: 1294 (5. March 2026) General Machine Data Manufacturer: Röders TEC GmbH (Germany) Machine Type: 5-Axis CNC Milling and Grinding Center Model: RXP 601 DSH Design: Vertical High-Speed ??Machine Axis System: X / Y / Z + A / C Drive System: Direct drives in all linear and rotary axes Measuring Systems: Optical direct measuring systems in all axes Thermal Management: Active temperature stabilization of all main components Workspace & Mechanics X-axis travel: 540 mm Y-axis travel: 635 mm Z-axis travel: 400 mm A-axis swivel range: ±115° C-axis continuous rotation (360°) Max. workpiece weight: up to 200 kg Machine weight: approx. 10,200 kg Space requirement (L×W×H): approx. 2,950 × 2,950 × 3,100 mm Spindle system Spindle manufacturer: Levicron Spindle type: High-precision air-bearing milling and grinding spindle Djdpfeyziacjx Adaour Bearing: Air bearing, operating pressure up to 10 bar Tool holder: HSK 25 (HSK-E depending on the version) Application: High-speed milling and precision grinding Thermal properties: Virtually frictionless, minimal heat input Grinding equipment: • Integrated grinding function in the CNC control • Optimized axis control for grinding processes • Vacuum Z-axis compensation to relieve stress on the Z-axis • Thermally stabilized Z-axis for maximum dimensional accuracy • Suitable for coordinate, profile, and fine grinding Peripheral systems: Extraction: Industrial extraction system for milling and grinding operations Oil treatment: Filter and treatment system for Grinding oil Cooling lubricant Temperature control Chip disposal Oil-based grinding medium Active media temperature control Integrated screw conveyors All information provided to the best of our knowledge, subject to technical modifications.

Year of construction: 2005, condition: excellent (used), X-axis travel mm: 700 Y-axis travel mm: 1000 Z-axis travel mm: 500 Number of pallets: 6 Spindle speed rpm: 1 - 18.000 Dujdpfxeyzhkme Adajr Tool holder: HSK-A63 Tool magazine slots: 70 Linear motor drives 2.5 s chip-to-chip tool change 20 m/s² acceleration 120 m/min speed High-dynamic 5-axis machining Weight-optimized kinematics Integrated workpiece changing system

Condition: good (used), - Tool cabinet with accessories. - Equipped with coolant pump and dust extraction. Table length: 476 mm Table width: 112 mm Dsdpfx Ajyzf Hrodaeur Longitudinal travel: 180 mm Cross travel: 150 mm Table swivels ±30° Vertical travel of grinding wheel: 200 mm Distance table – grinding wheel axis: max. 250 mm, min. 50 mm Ø between centres max. 155 mm Ø without tailstock max. 215 mm Motor with 2 speeds: 1500/3000 rpm Grinding spindle speeds: 3700/7400 or 5000/10000 rpm.

Condition: new, Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm Dedpsyzc Rhsfx Adajur • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Dusdpjyvkuqofx Adaer Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo

Condition: used, Year of construction: 2008, x-travel 400 mm y-travel 300 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 40 - 2.000 U/min table-size 750 x 320 mm Djdpfoxa Hf Rex Adaour feeds -stepless- 10 - 380 mm/min rapid traverse 1.200 mm/min power capacity 2,2 kW quill stroke 80 mm voltage 400 V total power requirement 4,7 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,15 x 1,40 x 1,85 m - Serial-No.: 148373 - 3-axis digital display - Horizontal milling device - Milling head swivels ±45° - Coolant device

Condition: used, Year of construction: 2008, x-travel 620 mm y-travel 420 mm z-travel 400 mm digital readout 3 Achsen HEIDENHAIN spindle taper ISO 40 DIN 69871A spindle turning speed range 50 - 4000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- max. 2000 mm/min rapid traverse 5 / 4 m/min power capacity - milling spindle (S1) 10,5 kW Dujdsyxxymepfx Adajr quill stroke 80 mm voltage 400 V total power requirement 17,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,00 x 2,76 x 2,05 m - Serial-No.: 90395 - Digital display HEIDENHAIN ND780 - electr. handwheel - mechanical handwheels - stepless speed control - stepless feed drives - horizontal milling spindle - coolant device

Condition: used, Year of construction: 1992, x-travel 725 mm y-travel 525 mm z-travel 505 mm table-size 1000 x 500 mm table load capacity 500 kp spindle taper ISO 40 Duodpfx Adjvbwimjajr quill stroke 80 mm spindle turning speed range 25 - 5000 U/min voltage 400 V tool changer made by: Kelch 20-fach CNC-control PHILIPS 3460 power capacity - milling spindle 10 kW total power requirement 18 kW weight of the machine ca. 4,1 t dimensions of the machine ca. 2,60 x 3,80 x 2,35 m Rigid machine for heavy machining. Machine was last time under power 8 years ago. Machine parameters must be reloaded to RAM. Machine is sold as it is (not working), no guarantee. For spare part use or reconditioning / retrofit.

Condition: excellent (used), Year of construction: 2001, grinding diameter 350 mm grinding length 1000 mm centre height 180 mm Control Fanuc 180-T grinding wheel width 80 (100) mm grinding wheel diameter 450 mm power capacity - grinding motor 7,5 kW table speed -stepless- 10 m/min grinding spindle head - swivable ° Duodpjhkunxsfx Adasr turning speed range - workpiece spindle 10 - 800 U/min grinding head swivelling 0 - 15 ° workpiece weight max. 120 kg taper in tailstock-quill MK 4 tailstock quill stroke 35 mm voltage 400 V total power requirement 18 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,75 x 2,25 x 1,80 m band filter unit 1,75 x 1,20 x 0,80 m - Serial No.6769 - Universal Cylindrical Grinding Machine with internal grinding spindle - CNC-controlled B-Axis for automatic. swivel of spindle head