Used Universal Center for sale (15,668)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, swivel angle B-axis (min.): -100 °, swivel angle B-axis (max.): 100 °, TECHNICAL DETAILS Travel range X/Y/Z: 650 x 550 x 400 mm Travel range B: ±100° Travel range C: infinite Ibedpfow T Th Tox Afijc Distance 320 mm pallet to spindle nose: 500 mm Distance faceplate to spindle nose: 600 mm MACHINE DETAILS Control cabinet weight: 300 kg Max. workpiece weight: 200 kg Machine dimensions (W x H x D): 2200 x 2830 x 2360 mm Machine weight: 7,000 kg Cooling unit weight (empty): 215 kg Space requirement (L x H x W): approx. 4,000 x 2,900 x 4,900 mm Operating hours: 39,100 h Machine power consumption: 30 kVA Operating voltage: 3x400 VAC - 50 Hz Dust extraction: 2.2 kVA Power consumption cooling unit: 7.7 kVA Total connected load: 39.9 kVA Compressed air according to ISO 8573.1: 7 bar Max. particle size: 1 µm Max. particle concentration: 1 g/m³ Max. pressure dew point: +3°C Max. oil content: 1 mg/m³ Air consumption: 500 l/min Transport and storage temperature: +5°C to +55°C Operating temperature: +18°C to +30°C

Condition: used, Year of construction: 2014, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW Ibjdpfx Ajwr Du Njfijc max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis KOMET Komtronic U-axis system with two heads: 1. UAS 160-HSK100-E-Z50-1 with 50 mm travel 2. Special UAS 160-HSK100-E-Z-32-1 with 32 mm travel. *

Condition: excellent (used), Year of construction: 2020, X-axis 800 mm Y-axis 800 mm Z-axis 600 mm A-axis +/- 140 degrees C-axis 360 degrees (infinite rotation) Max. workpiece weight 1,000 kg Tool holder HSK 63 Tool magazine 126 positions Spindle speed 18,000 rpm Drive power 50 kW Isdpjwynt Eefx Afijbc CNC control HEIDENHAIN iTNC 640 Machine weight 15.5 tons Spindle hours: 9,360 Including ICS 80 bar Including coolant system Including chip conveyor Including complete set of tools Including PAROTEC zero-point clamping system Including Heidenhain TS 460 probe

Condition: used, Year of construction: 2007, Technical details: x-travel: 1.250 mm y-travel: 710 mm z-travel: 710 mm table surface area: 1500 x 800 mm table load capacity: 800 kg turning speeds: 12000 1/min spindle drive: 15 / 10 kW control: MILLPLUS iT HEIDENHAIN spindle taper: SK 40 tool change unit: 60 Pos. capacity: 44 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,5 x 2,65 x 2,65 m 5 axis simultaneously machining center, B-axis (-120° / +30°), NC-rotary-table integrated in rigid table, direct measuring system, 3D probe infrared, HEIDENHAIN TS 640, internal coolant supply 40 bar, 600l, flushgun, chipconveyor, mode 4, 3D quickset software (no hardware), approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on" Iodpfoukkphox Afisbc *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC machining center, make: DECKEL MAHO, model: DMU 60 MONO BLOCK, year: 2008, serial number: 1158006573/71.499.109, spindle SK-40, 12 kW, 12,000 rpm, with chip conveyor, oil mist extraction, CNC control HEIDENHAIN iTNC 530, rotary table as axis, 600 mm diameter, 41 kVA, indicated operating hours approx. 45,656.5/17,210.94 hrs, fleece filter unit, table size approx. 800 x 600 mm, internal rotary table size approx. 580 mm, as fourth axis, vertical milling head. Ijdow Tdlcopfx Afisbc

Condition: good (used), Year of construction: 1996, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 18,000 rpm, overall weight: 4,000 kg, For sale is a 5-axis machining center of the DMU brand and type 50 5 The machine comes from a vocational school, is in good condition and very well maintained Please note in particular that the spindle has only 2,000 hours, 18,000 rpm and the IKZ system Technical data Year of construction: 1996 Operating hours: 35,000 h Spindle replacement: 33,000 h Iodpfxjry Tn Ee Afijbc Spindle hours: 2,000 h Spindle holder: SK 40 Control: Heidenhain Mill Pluss Max. speed: 18,000 rpm Working range x/y/z: 500/380/380 mm Rotary table: 500*380 mm Installation dimensions L/W/H: approx. 4,000/5,200/2,400 mm Weight: approx. 4,000 kg On request, for an extra charge, can be delivered throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 107.37.00.616, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, rotary table diameter: 450 mm, rotational speed (min.): 140 rpm, overall weight: 7,700 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 3,000 h, coolant supply: 70 bar, spindle motor power: 3,700 W, spindle nose: HSK63, number of spindles: 1, number of slots in tool magazine: 120, tool length: 270 mm, tool diameter: 80 mm, tool weight: 6 g, type of input current: three-phase, Equipment: chip conveyor, Excellent condition machine fully maintained by GF all the time we have owned it. -Machine came out of Renault F1 when 3 years old and we bought it from GF UK after a full service and checks with 12-month warranty. We have maintained it with GF ever since Brand New Spindle fitted less than a year ago. 2800 hours only We also had a new Rotary table fitted at a cost of £50k three years ago HEIDENHAIN iTNC 530 with Ethernet X-Axis (600 mm) Y-Axis (450 mm) Z-Axis (450 mm) Max Workpiece Size: (450mm) Dia x (450mm) height x (150kg) B-Axis (Tilt) -120 / +45 degrees C-Axis (Rotary) x 360 degrees FEED DRIVE Drive: Ball screws in X, Y, Z-axis Drive: Direct Drive Torque Motors in B and C-axis Rapid Traverse X/Y/Z (22 m/min) Table Rapid Speed B-Axis (Tilt)50 rpm Table Rapid Speed C-Axis (Rotary)140 rpm Maximum Acceleration X/Y/Z up to 5 m/sec2 DIRECT DRIVE TORQUE MOTOR RTT (ROTARY TILT TABLE) DYNAFIX System 3R Dynafix with 7 x pallet stations (350 x 350 mm) maximum pallet size possible Maximum workpiece weight (150 kg) With hydraulic clamping in turning and swivelling axis All feed motors are liquid-cooled 120 POSITION TOOL TOWER Number of magazine places - 120 positions Spindle taper - HSK-A63 Maximum tool diameter (80 mm) Maximum tool diameter with unoccupied adjacent positions. (125 mm) Maximum tool length (270 mm) Maximum permitted tool weight (6 kg) Number of pockets for tool length up to (270 mm)70 Number of pockets for tool length up to (160 mm)50 WEIGHT Including pallet changer - Approximately (7,700 kg) Machine base - Polymer concrete (man-made granite) Iedpfew S Nf Eex Afijbc STEP-TEC SWISS MADE SPINDLE Spindle taper-HSK-A63 Spindle RPM- 100-20,000 rpm Spindle power - 40 HP (38 kW) Spindle torque 40% ED - 67 Ft/Lb (91 Nm) Maximum tool diameter - (80 mm) Maximum tool length from the spindle nose (350 mm) Maximum tool weight- (6 kg) EQUIPPED WITH: (600 l) band filter coolant tank with micro paper filtration system -18-80 bar (261-1,160 PSI) adjustable high-pressure Coolant Thru Spindle (CTS) -Flow rate 5.3 gallon/min (20 l/min). Unit is a KNOLL KF400|FKA/600 Litre Lift up scraper chip conveyor for aluminium machining M&H Infrared touch probe BLUM laser tool measuring system Tool blow-off unit Blow-off unit for laser measuring system Tilting the working plane: This option activates the optional HEIDENHAIN software cycle 19 “APS” Option (Advance Process System) “ITC” Option (Intelligent Thermal Control) “ITC-5X” Option (Intelligent Thermal Control for 5 axis) External spindle chiller

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m Isdjwr Drnspfx Afisbc 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: used, Year of construction: 2012, operating hours: 31,063 h, functionality: fully functional, controller manufacturer: Heidenhain Steuerung 620, number of slots in tool magazine: 54, Equipment: chip conveyor, rotational speed infinitely variable, For sale: Spinner U1-520 - 5-axis CNC machining centre - Heidenhain control 620 - Year of manufacture: 2012 - Internal and air cooling - 3D probe - Operating hours: 31,063 h - Program run time: 14,228 h Further information available upon request Iedpfx Aew Skq Ajfiebc

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,072 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Working Area Travel X: 500 mm Travel Y: 450 mm Travel Z: 400 mm Ibodpfow If Uzex Afioc Spindle and Tooling Spindle speed: 18,000 rpm Tool holder: SK 40 Tool magazine: 30 positions Max. tool length: 300 mm Max. tool diameter: 80 / 130 mm Chip-to-chip time: 5 s Feed Drives Rapid traverse X/Y/Z: 80 / 50 / 50 m/min Feed rate X/Y/Z: 20 / 20 / 20 m/min Feed force: 5 / 5 / 5 kN MACHINE DETAILS Control: Heidenhain iTNC 530 Control on-time hours: 11,072 h Machine on-time hours: 60,211 h EQUIPMENT BLUM Laser Control Micro Compact NT tool and workpiece breakage control Chip conveyor Note: The machine will be loaded by crane. Transport must therefore be carried out using a suitable truck with Edscha sliding roof. The scope of delivery includes the complete original documentation and machine logbooks.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC machining center Manufacturer: DECKEL MAHO Model: DMU 100 MONOBLOCK Year: 2007 Serial number: 11600001143 CNC control: iTNC 530 Tool changer: SK40 Spindle drive: 12 kW Up to 12,000 rpm Hour counter: approx. 39,076.8/0941.35 h Chip conveyor Fleece filter system Ibjdpfjw Tdi Iex Afisc Controlled rotary table, platter 600 mm Integrated into fixed table, size 1000 x 800 mm Oil mist extraction system, brand INDUSN

Condition: excellent (used), Year of construction: 2009, operating hours: 6,900 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens 840 dsl, controller model: 840dsl, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Working area X-Y-Z = 500mm x 450mm x 400mm Digital swivel rotary table, B and C axes Clamping surface 630mm x 500mm Swivel range: B -50 / +110°, C 0-360° Motor spindle 20–10,000 rpm, newly overhauled Ijdpfxsw Sgyto Afiebc Electronic handwheel 30-tool magazine, SK 40 Operating mode 4 Second cabin door 3D measuring probe Machine weight approx. 4,500 kg Including documentation The machine has 18,700 power-on hours and only 6,900 spindle hours. Used exclusively for aluminum production. The machine is operational and can be inspected under power.

Condition: good (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 400 mm, feed length Y-axis: 240 mm, feed length Z-axis: 350 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, spindle speed (max.): 30,000 rpm, Mikron HSM 400U 5-Axis CNC (Graphite Mill) Year:2002 S/N: 107.87.00.024 Control: Heidenhain iTNC530 Spindle Taper: HSK-E40 Spindle Speed: 30,000 RPM Spindle Power: 13 kW (17 HP) ATC: 36-Station Automatic Tool Changer Travels: X: 15.723″ (400 mm) Y: 9.434″ (240 mm) Z: 13.758″ (350 mm) A-Axis: ±110° C-Axis: 360° / 0.001° Tooling System: System 3R Tooling Base (on Trunnion) 48-Station System 3R Tooling Carrousel Blum Laser Tool Measurement System Rapid Traverse Rate: 40 m/min (1,575 IPM) Repeatability: ±0.002 mm Max Workpiece Capacity: Ø230 mm × 350 mm Height Max Load: 25 kg Structure: Polymer Concrete Frame Cooling System: Full Liquid Cooling Machine Dimensions (L×W×H): 3,840 × 2,540 × 2,640 mm Ibjdpfx Asw H Izpjfiec Weight: 6,700 kg

Condition: used, Year of construction: 2019, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 520 mm control: Sinumerik 840D sl MProfinet number of spindles: 3 Spindle RPM: 8000 1/min Spindle power: 40/49 kW Spindle Torque: 300/360 Nm Parts carrier / rotary tables (B-axes): 2 x 3 Table load per A-axis carrier: 1600 (x2) kg Width of A-Axis table: 1920 mm Max. dia. parts carrier (A-axis: 800 Interference dia. rotary tables: 560 mm workpiece - installed height: 400 mm tool taper: HSK-A 100 tool change unit: 120 Pos. diameter of tools max.: 260 mm tool length - max.: 420 mm weight of tools max.: 20 kg total power requirement: 170 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: 8,4 x 6,1 x 3,4 m Accerories Coolant gun Probe for tool breakage and length measuring Signal lamp 3 colors Automatic door High-end 3-spindle, 5-axis simultaneous horizontal machining center with CNC controlled pendulum swivel-rotary table (A/B-axis), 3 torque rotary tables inside machine while 3 rotary tables are waiting at the setup side. Coolant through spindle 0-70bar steppless Baluff tool coding, Ibsdpowywnlofx Afiec Tool breakage control, sister tool system chip conveyor, coolant gun, coolant shower, air gun, automatic door Remote diagnosis. 3 identical machines are available. *

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, X-travel 500 mm Y-travel 400 mm Z-travel 400 mm Control: Heidenhain TNC Speed range - main spindle 20 - 9,000 rpm Drive power - main spindle 9 / 13 kW Table diameter 700 x 500 mm Swiveling B: 105° (-10°/+95°) manually Rotatable 360° manually Max. table load 200 kg Number of T-slots: 7 Centering hole 30H7 mm Number of tool positions: 16 positions Tool holder ISO 40 DIN 69871 Max. tool length 290 mm Max. tool weight 6.0 kg Max. total weight 50 kg Ibedewm Nqropfx Afiec Max. feed rate 10,000 mm/min Total power requirement 17 kW Machine weight approx. 3.2 t Space requirement approx. 4.0 x 4.0 x 2.5 m

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system Ibodpfxsw Ht Ibj Afisc NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025. TECHNICAL DETAILS Travel distances Travel X: 1,350 mm Travel Y: 1,150 mm Travel Z (vertical): 685 mm Travel Z (horizontal): 870 mm Spindle Operating spindle: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool data Tool magazine: 46-slot carousel Number of magazine stations: 46 Max. tool diameter (all positions filled): 80 mm Max. tool diameter (adjacent positions free): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Tool change time (chip-to-chip): 9–12 sec H/H Feeds and rapid traverse Iodpew Hq Aiofx Afisbc Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine on-hours: 82,797 h Dimensions & weight Machine weight: approx. 12,000 kg Required floor space (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 measuring probe Technical documentation Note: Transport is expected to be by truck with a 3,000 mm loading width.

Condition: used, Deckel Maho DMU 70 eVolution Isdpfx Asw Rtd Aefisbc

Condition: used, Year of construction: 1999, Technical details: x-travel: 1250 mm y-travel: 880 mm z-travel: 800 mm control: Heidenhain TNC 430 tool change unit: 60 Pos. Ibedpotq Nlcefx Afijc Tool bore: SK 50 turning speeds: 8000 1/min size of pallet: 1000 x 800 mm total power requirement: 56 kVA weight of the machine ca.: 14,3 t dimensions of the machine ca.: 5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020 *

Condition: used, Year of construction: 2013, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW Ijdpfewr Dt Sox Afisbc max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis KOMET Komtronic U-axis system with two heads: 1. UAS 160-HSK100-E-Z50-1 with 50 mm travel 2. Special UAS 160-HSK100-E-Z-32-1 with 32 mm travel. *

Condition: excellent (used), Year of construction: 2015, operating hours: 20,223 h, functionality: fully functional, machine/vehicle number: 1500050376, travel distance X-axis: 7,520 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 300 mm, controller model: eluCam, spindle speed (max.): 24,000 rpm, operating hours of spindle: 3,040 h, spindle motor power: 15,000 W, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, SBZ 150 Profile Machining Center 7.3 m 5-Axis CNC eluCam Year of manufacture: 2015 Ibsdpow Rcdlsfx Afioc 8 clamping devices Automatic length measurement on both sides Indexing unit with clamping carriage, software version Complete tool set (HSK-63F) including two saw blades D=400 mm + D=180 mm Machine is in excellent condition and immediately ready for operation Machine is ready for collection in a 40' HiCube sea container and can be inspected at any time by appointment

Condition: used, Year of construction: 2006, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.200 mm Ibsdpew E Nnnofx Afisc C-axis 360 x 0,001 ° A - axis ° Control SINUMERIK 840D Powerline SIEMENS Size of table plate 900 x 700 mm milling spindle - taper HSK - A100 spindle turning speed - stepless 12000 U/min toolpiece magazine: chain magazine 180 Stück total power requirement 85 kW weight of the machine ca. 20,5 t dimensions of the machine ca. 6,5 x 6,1 x 3,5 m 5-axis machining center with horizontal milling spindle arrangement SIEMENS SINUMERIK 840D Powerline control system Electronic handwheel NC swivel rotary table Rotoclear window Measuring probe ready Blum laser tool measurement Vibration sensor Tool taper cleaning 4th operating mode Internal coolant system with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling/heating unit

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, Chiron Mill 6000 / 2013, completely overhauled by Chiron. Year of manufacture: 2004 / overhauled in 2013. Equipped with Siemens 840D control system. Travel X/Y: 6000/630 mm. Pendulum machining possible. 92-position tool changer. HSK-A 63 tool holder. Spindle speed up to 12,000 rpm. Spindle replaced in 2021. NC swivel milling head. Hydraulic unit with 210 bar. 2 hydraulic clamping circuits. Separate clamping pressure control per pendulum field. Clamping pressure monitoring. Pneumatic workpiece stop. 2 separately controllable pneumatic lifting devices. Brankamp collision monitoring system. Scraper belt conveyor. OKZ prepared. Knoll vacuum rotation filter. Rotating viewing window. Automatic loading doors. 5-axis milling package. IKZ 70 bar (internal coolant supply at 70 bar). Oil mist extraction. Pendulum machining possible. Pendulum machining X-axis travel: 1773 mm with face machining (tool length: 120 mm). Linear clamping system with 8 vices. Iedpfxjw N Nvfs Afiebc

Condition: good (used), Year of construction: 2014, 1 unit CNC Machining Center C 400 U with 5-axis simultaneous Heidenhain control iTNC 530 Manufacturer: Hermle Year of manufacture: 2014 Technical Data Working Area: Iedpew N Ip Defx Afisbc - Travel distances X-axis 850 mm Y-axis 700 mm Z-axis 500 mm - Swivel range A-axis +91 / -139° - Swivel range C-axis 360° - Direct path measuring system - Resolution 0.0001 mm - NC rotary table 650 mm diameter - Table load capacity 600 kg - A-axis rotation speed 25 rpm - C-axis rotation speed 30 rpm Main Spindle Drive: - Drive power (100% – 20% duty cycle) 10 – 20 kW - Torque (100% – 20% duty cycle) 87 – 180 Nm - Speed range 20 – 15,000 rpm - Spindle taper SK-40 Rapid Traverse In X / Y / Z axes 35 / 35 / 35 m/min Linear acceleration 6 m/s² Tool Changer: - Magazine capacity 81 tools (extended magazine) - Tool diameter 80 mm - Chip-to-chip time (per VDI 2852) 6 sec. Space requirements 5.85 x 4.10 x 3.10 m Machine weight approx. 10.0 t Equipment HH probe, electronic handwheel, Blum tool breakage/ measurement A2, with ICS 40 bar, air blow-off device, swarf flush gun, electronic thermal compensation, tool holders SK-40 Delivery terms: Ex stock Hessen, Bad Emstal Delivery date: By arrangement; machine can be demonstrated under power.

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, functionality: fully functional, 5-Axis Milling Machine Makino D500 incl. INDUNORM Automation UL300 Fanuc Professional 5 simultaneous 5 axes TECHNICAL DETAILS X-axis (longitudinal): 550 mm Y-axis (cross): 1,000 mm Z-axis (vertical): 500 mm A-axis with dual torque drive: +300°/-120° C-axis with torque drive: 360° / resolution 0.0001° C-axis rotational speed: 50 rpm Feed rate in all axes: 50,000 mm/min Clamping table: Dimension: Ø500 mm with mounted zero point system type Parotec: 356 mm x 356 mm Table load capacity: 350 kg Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Automatic Tool Changer Tool holder: HSK63 Number of tool pockets: 80 slots Indunorm Pallet Changer Pallet size 1 for automation: 6 pieces 398 mm x 398 mm Preset pallet for Erowa ITS: 1 piece 398 mm x 398 mm Pallet size 2 for automation: 15 pieces Erowa ITS 115 mm Pallet size 3 for automation: 32 pieces Erowa ITS 50 mm Transfer weight incl. pallet: 300 kg Rapid Traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A-/C-axis: 18,000°/min (equivalent to 50 rpm) Feed Feed rate X-axis: 32 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Feed rate A-/C-axis: 12,000°/min (equivalent to 33.3 rpm at max. 500 kg) Feed rate A-/C-axis: 18,000°/min (equivalent to 50 rpm) MACHINE DIMENSIONS Width: 3,200 mm Depth: 3,550 mm Height: 2,900 mm Machine weight: 16,000 kg Ibedpfxow Eiilj Afisc EQUIPMENT - Chip conveyor - Paper band filter - Bed flushing - Electronic handwheel - 6 pieces Parotec pallet 398 mm x 398 mm - 1 piece pre-pallet Parotec for Erowa ITS 398 mm x 398 mm - Extensive Fanuc control options - Machine documentation - Marposs infrared probe - Preparation for oil mist extraction system - Blum laser tool measurement - Work area rinsing - Manual flush gun - External coolant with 3 nozzles 7 bar - Internal coolant 15 bar - Coolant temperature control - Internal & external air supply The machine is available immediately. Transport and commissioning upon request Viewing in Idstein by appointment