Universal machining center

Quaser MV134

Condition: used, Year of construction: 2014, DMC DL 80V CNC vertical lathe Year of manufacture: 2014 800 mm turning diameter 750 mm turning length 30 kw 2000 rpm spindle Bsdpjvr Ecpjfx Ab Tjdk 12-position turret 21" chuck Fanuc Oi-Td control Machine weight 9800 kg With chip conveyor and standard accessories

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Bdedpfx Asd I A Dhjb Tok Dimensions 2500 x 1100 x 1380 mm

Condition: like new (used), Year of construction: 2011, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 157 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 464 mm, rotational speed (max.): 6,000 rpm, total height: 1,885 mm, total length: 3,675 mm, total width: 2,258 mm, overall weight: 9,000 kg, CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464,8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Number of lower turrets: 1 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Part catcher Workarea light Bar Loader ILS - RBK Machine running time: Nominal Kva: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height mm: 1.885 Weight kg: 9.000 Bdodpfsxiwnnox Ab Tok

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit - Tool probe Bedpfx Abouhbv Ss Tjdk - Workpiece probe : Renishaw OMP60

Condition: like new (used), Year of construction: 2018, operating hours: 2,350 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used QUASER MV 184 C 4-axis vertical machining center is a medium-sized CNC vertical machining center featuring a cast iron structure and roller guideways for the table. Axis travels: X 1020 mm, Y 610 mm, Z 610 mm; table dimensions: 1200×600 mm, with a maximum load capacity of 500 kg. The machine is equipped with a continuous 4th axis TJR HR 255N with corresponding tailstock, as well as a precision-milled table with T-slots. Spindle: ISO-40 (DIN 69871) with 10,000 rpm (max power: 18 kW), spindle cooling via dedicated chiller, high-pressure through-spindle coolant, 30-position RANDOM-type tool changer with swing arm, RENISHAW TS 27 tool presetting device, wireless RENISHAW part probe, and belt-type chip conveyor. Bdsdpfjxf Nbrex Ab Tok Year of manufacture: June 2017 (installed in 2018), equipped with FANUC MILL I CNC with color LCD, Manual Guide i software, remote handwheel, USB port, RS-232 serial interface, memory card slot, and FILTERMIST mist extraction unit. The machine is in PERFECT condition with only 2,350 cutting hours, and various tooling options are available as accessories.

Condition: as good as new (ex-display), Year of construction: 2024, General Tool magazine : 2x chain magazine with 32 stations each Rapid traverse in X/Y/Z : 48 m/min Bdsdsur Ng Uopfx Ab Tok Traverse path X/Y/Z : 800/900/620 mm Spindle Technology : Direct drive Speed : 15.000 rpm Tool holder : HSK-A63 NC rotary table Technology : Swivel rotary table with torque drive, made by Kessler A-axis : +/- 120 C-axis : 360° Clamping surface : ø800 mm Table load (max.) : 1,000 kg Workpiece dimensions (max.) : ø800 x 500 mm Equipment Distance measuring system : Direct (glass scales) in all axes Chip management : Chip conveyor Coolant management : IKZ system with filter and high pressure, 18 bar Workpiece measurement : Touch probe, Heidenhain TS 740 Tool measurement : Laser, BLUM Set-up mode : Electronic handwheel Additional equipment : Spindle cooler

Condition: used, machine/vehicle number: 83040, Projection: 150 mm Inspection height: 200 mm Bsdsb Dkh Nspfx Ab Tedk Space requirement: 350 x 600 x 1410 mm

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Bjdpfx Abotpu Szj Tjdk Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Year of construction: 2008, condition: excellent (used), Max. bar diameter 65 mm Bedpfoin Hkmsx Ab Todk Max. bar length 3000 mm

Condition: used, Year of construction: 2017, turning diameter 290 mm turning length 204 mm control Fanuc 31i - Model B Number of working hours 23850 h number of spindles 2 Stück spindle turning speed range max. 3200 U/min x-travel 230 mm z-travel 250 mm distance between the spindle noses 450 mm spindle nose A 2 - 6 Bjdpfx Aovuup Djb Todk spindle bore 73 mm tool turret with 10 work positions 2 x workpiece magazin 14 Stück max. workpiece diameter 200 mm workpiece weight max. 2 x 8 kg workpiece length - max. 120 mm rapid traverse 24 m/min feed - longitudinal/cross 0 - 1260 mm/min spindle motor 15/18 kW Driven tools 3,7/5,5 kW turning speed of the driven tools 4000 U/min. total power requirement 61 kVA weight of the machine ca. 6,3 t dimensions of the machine ca. 3,1 x 2,9 x 3,6 mm Front lathe - Horizontal double spindle machine with gantry loader Raku Raku and workpiece magazine on both sides, C-axis and 10-way turret for both sides with driven tools, more powerful spindle motor, 14-way workpiece pallet magazine. Machine dealer with own stock of 1600 m².