Milling machining centers - universal

MATEC 30 HV

Condition: ready for operation (used), Year of construction: 1997, operating hours: 36,111 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: LE 430 CA, overall weight: 16,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details. • Axes travel and speeds • X-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Y-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Z-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Spindle • Drive power (100% duty cycle): 10 kW from 2000 rpm; torque 48 Nm up to 2000 rpm; approx. 6 Nm at 15,000 rpm (M = P*9550/n) • Drive power (25% duty cycle): 15 kW from 2000 rpm; torque 72 Nm up to 2000 rpm; approx. 10 Nm at 15,000 rpm (M = P*9550/n) • Coolant: Internal coolant 20 bar • Head: Swivel head with 1° indexing increments • Tooling • Tool changer: 36 positions • Max. tool diameter: 130 mm • Work area and clamping • Max. workpiece length for double-sided end machining: X = 3500 mm − 2 × max. tool length • Clamping surface: X = 4500 mm (clamping plate length) • Y = 650 mm; 7 T-slots, 125 mm spacing • Electrical connection: Total connected load 42 kVA Hfedpfeyzq A Ssx Agfsf

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system Hfodjynw Erepfx Agfsf

Condition: ready for operation (used), Year of construction: 2012, operating hours: 50,106 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, spindle motor power: 16,000 W, number of axes: 5, This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Travel Z: 800 mm (horizontal) • Travel Z: 700 mm (vertical) Hodsyrqvlspfx Agfoff • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine status: fully functional • Operating hours: 50,106 h • Control: Rexroth IndraMotion MTX Additional equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lightingPlease note: the vice and zero-point clamping system shown are not included in the scope of delivery. Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us. Additional equipment • Turning Package: Enables high-precision turning operations in combination with standard milling, facilitating turning and milling in a single setup. Machine Benefits Qualitative Machine Benefits • 5-axis cnc machining center with traveling column, rotary table, and swivel head Technical Machine Benefits • Full 5-axis capabilities for complex part geometries • A manual 3-jaw chuck rota s plus 800 from schunk is installed on the rotary table. Hodpox D Dy Hefx Agfjff • There is no hardware runtime counter on the machine. Extra Information Machine still under power

Year of construction: 1991, condition: ready for operation (used), Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible. Hedovu Dfbepfx Agfoff

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, number of axes: 5, This 3-axis Matec 30 HV was manufactured in 2013. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine includes a maximum clamping weight of 1200 kg and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV vertical machining centre we have for sale. Contact us for further details. Hfodpfx Agoymm Exjfsf • Z travel H: 800 mm • Z travel V: 700 mm • Interference circle diameter: 950 mm • Max. clamping weight: 1200 kg • Tool positions: 48

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Hjdpfxox D Ix Tj Agfjff Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, workpiece length (max.): 1,000 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 120, controller manufacturer: FANUC, total height: 3,138 mm, total length: 2,725 mm, total width: 4,610 mm, overall weight: 12,900 kg, controller model: FS-31IA (MAPPS III), feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (max.): 14,000 rpm, tool length: 500 mm, workpiece diameter (max.): 800 mm, CNC controller: FS-31IA (MAPPS III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 B-axis degrees: 360º (1º) Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Hfsdpfevw Sc Tsx Agfsf Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Equipment Chip conveyor Workarea light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity: 680 Machine running times Rated power kVA: 49 Basic machine dimensions / weight Length mm: 2.725 Width mm: 4.610 Height mm: 3.138 Weight kg: 12.900

Condition: reconditioned (used), Year of construction: 2007, operating hours: 21,990 h, functionality: fully functional, machine/vehicle number: 0903, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, rotational speed infinitely variable, Travel: 3000 x 800 x 1100 mm (X-Y-Z) Heidenhain iTNC530 control Handwheel 48 tools in the chain Hfjdpoyqx N Djfx Agfef Motor spindle: 12,000 rpm / 30 kW / 198 Nm Tool holder HSK63 Direct measuring systems on all axes ICS 20 bar with band filter system, capacity 450 liters Mounted NC rotary table for H/V, diameter 500 mm 3D measuring probe Renishaw Tool setting probe Renishaw New motor spindle, new X-axis ball screw, geometry aligned, completely serviced.

Condition: good (used), Year of construction: 2009, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,300 mm, Equipment: chip conveyor, Good conditions, millturn function with spindle head. Hfedpfx Asyl S Ntegfef

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Hfodjgbfaxjpfx Agfef Max. Drilling Capacity (mm) Ø40 mm

Condition: excellent (used), Year of construction: 2013, 5-axis machining center (BAZ) Hedpjyaba Dsfx Agfsff Control: Heidenhain Travel paths: X 2000 mm, Y 600 mm, Z = H 800 mm, V 700 mm. Max. clamping weight (rotary table): 1200 kg Max. spindle speed: 18,000 rpm

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm NC swing head +/- 105° swiveling Heidenhain TNC640 Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Hfsdpfx Asyaa Sfegfef Prepared for additional NC axis 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Tools and vices can be taken over if required.

Condition: used, length:1800 mm width:1200 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m Hfedpscxxu Dsfx Agfjf

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: VDI 40, number of slots in tool magazine: 36, Additional equipment: Hodpfxox Sv A Sj Agfoff 4th axis IKZ (internal coolant supply) with 40 bar Swivel head with 1° increment 3D wireless probe