Used U 1200 for sale (46,031)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Dryer conveyor for digital direct-to-garment (DTG) printing: DUAL 1200 by Chiossi & Cavazzuti

. Hot air dryer for DTG printing, excellent condition. Double belt conveyor.

Year 2017.
 Ksdpfx Ahjvcbrze Nedg

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Kedernnt Ijpfx Ah Nedg Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Ksdpfx Aeqa Dv Toh Nodg Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,500 h, functionality: fully functional, The sawmill is in very good technical condition and has 2,500 operating hours. - maximum cutting width: 1200 mm - maximum cutting length: 11,500 mm - main motor: 45 kW - side feeder: 5,500 mm Kdodpfx Ajxy Skfjh Nsg - outfeed table: 5,500 mm

Condition: used, Year of construction: 2009, operating hours: 3,483 h, functionality: fully functional, total length: 5,550 mm, total width: 2,250 mm, bar diameter (max.): 95 mm, overall weight: 8,400 kg, Max. workable diameter from bar mm 95 Max. workable diameter from recovery mm 500 Max. workable length mm 1250 Max. rotating diameter mm 700 MAIN ELECTROSPINDLE: Variable rotation range rpm 40-2800 ASA spindle nose 8" Spindle hole mm 111 Internal diameter of bearings mm 150 Self-centering diameter mm 315 Motor power kW 30 TAILSTOCK TO FOLLOW: Positioning stroke mm 1,100 Quilt stroke mm 150 Quilt diameter mm 115 MOTORIZED ELECTROSPINDLE HEAD: Type of attachment HSK-63 Max. revolutions RPM 6,000 Electrospindle motor power Kw 9 B AXIS UNIT: Total rotation range 205° Rotation range beyond the tailstock axis 15° Rotation range beyond the spindle axis 10° Angular position with mechanical block Every 5° CROSS SLIDE Max. Z stroke mm 1300 Max. X stroke mm 520 Max. stroke Y mm 210 (+120 – 90) TOOL MAGAZINE Magazine capacity 40 pos Max. diameter of tools with adjacent tools mm 80 Kjdpfjvv Ud Rex Ah Nsdg Max. diameter of tools without adjacent tools mm 140

Condition: ready for operation (used), , used, slight signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kdodpoxtwb Aofx Ah Nog

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,200 h, load capacity: 280 kg, overall weight: 14,660 kg, next inspection (TÜV): 03/2026, transport length: 9,280 mm, transport width: 2,490 mm, transport height: 2,750 mm, Equipment: UVV, !Only 1200 hours! Working height: 27.20 m Platform height: 25.20 m Drive: Hybrid Lateral outreach: 19 m Own weight: 14,660 kg Machine dimensions (LxWxH): 9.28 m x 2.49 m x 2.75 m Platform dimensions (LxW): 2.40 m x 0.90 m Basket payload: 280 kg Kdodsvvtiropfx Ah Nsg !Only 1200 hours!

Condition: used, axle configuration: 2 axles, first registration: 11/1991, total width: 2,500 mm, Year of construction: 1991, Axle configuration Rear axle 1: Max. axle load: 6,000 kg Rear axle 2: Max. axle load: 6,000 kg Kdjdpfxjvn Hp Ns Ah Nog Weights Unladen weight: 7,280 kg Payload: 16,720 kg Gross vehicle weight: 24,000 kg Functional Loading platform height: 85 cm Condition General condition: average Technical condition: average Visual condition: average Further information Contact Jos Rietveld for further information.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) Kdodoxpvhajpfx Ah Nsg

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, input current: 380 A, workpiece weight (max.): 12,000 kg, total width: 1,800 mm, total length: 6,000 mm, total height: 4,000 mm, Central drum printing machine for sale, up to 6 colors, 1200 mm print width, brand BFM, year 2003, complete with cylinders and matching support stand. The machine has operated a maximum of one shift on weekdays, is in fair condition, and comes with support stand and 16 cylinders. Asking price is €60,000 plus VAT. Assembly, disassembly, and transport are at the buyer’s expense. Kdjdpfexr Uuqjx Ah Nog

Year of construction: 2011, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: DUAL 1200 by Chiossi & Cavazzuti Hot air dryer for DTG printing like new, excellent condition. Double belt conveyor. Kodpfxjiw Egpe Ah Njdg Year 2012. Textile oven almost new, overhauled and cleaned. Sold new for just over €20,000. Delivery not included - On request Characteristics of the Chiossi & Cavazzuti Dual 1200 drying tunnel: - MAX POWER: 19 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 1200 mm - MAX PRODUCTION: 270 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Electric Modular Dryer Forced Hot Air System Drying Area: 2000x1200 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Year of construction: 2023, condition: as good as new (ex-display), PY-1200 is an ideal and professional machine in die-cutting，creasing，embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to paper cup,paper box,medical package,wine package,food package and other environmental protection products. Kdjdpfx Aoxnkdgjh Nog Cut Precision ~ 0.10mm Production Capacity 150-210 times/min Max cutting size 120x64 cm Maximum pressure 350 tons Total power 14.5 kw Total weight 8400 kg overall dimensions 4.2x2.3x1.85 m

Condition: used, Landonio TMU 1200 Lathe Kdjdpfx Ahsizxvke Nog

Condition: used, Year of construction: 2008, VERTICAL MACHINING CENTER EUMACH SUMO 1200 L CNC: Fanuc Series 0i - MC Axis travels: X-axis: 1200 mm Kodsxk Tzyjpfx Ah Njdg Y-axis: 600 mm Z-axis: 600 mm Table: Dimensions: approx. 1400 × 630 mm Maximum load capacity: 1200 kg Spindle: Taper: BT-40 Maximum speed: 8,000 rpm Power: 16 kW Tool changer: 24-position tool magazine Rapid traverse rate: Up to 24,000 mm/min Machine weight: Approx. 7,500 kg Chip conveyor Complete documentation Year of first installation: 2008

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm Kodpfsz N Amjx Ah Njdg cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 1,200 mm, empty load weight: 2,000 kg, table width: 1,200 mm, Veneer Splicer with Integrated Gluing System Manufacturer: Fisher & Rückle Model: IMPETUM 1200 (2025 Model) Includes 4 mm Veneer Thickness Conversion Kit For the quick and easy conversion of the IMPETUM for processing veneer thicknesses up to 4 mm. The conversion kit includes a foot pedal for manual triggering of veneer infeed. For gluing and producing seamless lengthwise joints of parallel-joined veneer strips in a single operation, using standard urea glues. Technical specifications: - Veneer strips must not show extreme tension or waviness. - Veneer strip length (with the grain): 380 - 4000 mm - Veneer strip width (across the grain): 45 - 1200 mm Ksdpoxd Apmsfx Ah Nodg - Veneer thickness: 0.4 - 1.5 mm (up to 4 mm with conversion kit) - Feed speed: 5 - 50 m/min - Throughput speed (practical average value): approx. 20 - 30 m/min - Heating zone length: 1000 mm - Max. heating temperature: 200 °C - Throat depth: 1200 mm - Working height: approx. 960 mm Glue pot capacity: 150 g Glue type: Urea glue Glue pot cooling: Water cooled Features: - Storage of machine settings for recurring orders. - Separate electric drives for chain drive and glue application. During pauses, the chains can be stopped to prevent wear, while the glue in the pot remains in motion to prevent lump formation. - Glue is applied only to the newly fed veneer strips, significantly enhancing joint quality. - Robust, virtually maintenance-free stainless steel transport chains. - Six heating zones for individual temperature settings. - Infinitely variable assembly speeds. - Touch panel with displays for temperature, speed, and pressure. - Easily accessible glue pot for fast refilling or cleaning. - Extended glue usability thanks to integrated glue pot cooling. - Glue dosage system ensures consistent and even glue application without excess glue. Connected load: approx. 3 kW Compressed air: 6 bar Compressed air consumption: 5 NL/min Shipping dimensions: approx. 2300 x 2300 x 1850 mm Weight: approx. 2,000 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 133846, LDPE extruder, head diameter 150 and 200 mm, screw diameter 55 mm, width up to 1200 mm, 30-180 micron, single winding Kodpfx Aexdknqjh Nedg

Condition: used, mileage: 379,000 km, power: 184 kW (250.17 HP), first registration: 07/2015, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGL 12.250 4x2 refrigerated vehicle, Euro 6, automatic gearbox, Thermoking unit T 1200 R cooling down to -30, approx. 6700h, diesel/electricity, body dimensions: approx. 7.30m, Kress body, leaf-air suspension, local traffic house, collision warning system, double tank, cruise control, air conditioning, heated seats, auxiliary heating, reversing camera, differential lock, hill start assist, radio/CD/AUX, navigation system Kdodpfx Ajrir Iwjh Neg 1st hand

Condition: used, mileage: 574,541 km, power: 213 kW (289.60 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 01/2026, color: silver, gearing type: automatic, emission class: euro6, loading space length: 8,010 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, MAN TGM 18290 T-1200 R SPECTRUM * EZ: January 17, 2017 * 574,541 km * EURO 6 * Automatic transmission * 213 kW * 6871 cc * MOT 01/2026 * Storage compartment * Fixed passenger seat * Heated, electrically adjustable curb mirror on the right * Rear axle differential lock * Entry lighting * Emergency Brake Assist * Local transport * Driver's comfort seat * Air-cushioned/lumbar/shoulder adjustment/heating * High beam/fog lights * Air conditioning * MAN sound system * Comfort seat upholstery * Cruise control * Front spring 7.5 t * Unladen weight in kg: 10,690 * Gross vehicle weight in kg: 18,000 * Tires: from left: Michelin 14 mm 315/70 R 22.5 * Front right: Michelin 15 mm 315/70 R 22.5 * Rear right: Michelin 11 mm 315/70 R 22.5 * Rear right: Michelin 13 mm 315/70 R 22.5 * Rear left: Michelin 10 mm 315/70 R 22.5 * Rear left: Michelin 12 mm 315/70 R 22.5 * Palfinger tail lift * Thermo King T 1200 R refrigeration unit * Wilke refrigerated box with 3 compartments * Right compartment width approx. 81 cm, length 4.22 m, larger left compartment 1.57 m, smaller left compartment 76 cm wide Ksdpfov R Rgdox Ah Nodg * Mains operating hours 4246 * Diesel engine hours 9666 * All information without guarantee

Year of construction: 2025, condition: as good as new (ex-display), QUASAR 1200 kN tensile testing machine / universal testing machine most modern WINDOWS software (freely programmable test procedures), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: Kdodpfxjdb Ndcs Ah Njg - Machine in working order - incl. load cell 1200 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - comression plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 120cm Width: 200cm Kdedpfsf Saaisx Ah Nsg Height: 200cm Electric power: 4.5kW Delivery time: After the payment, from the stock

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x900x1900 mm Kedpjv A Hcxjfx Ah Nodg Weight 800 kg Total power requirement 3,5 kw

Year of construction: 1990, condition: used, x-travel 850 mm Kdodpet Hwqksfx Ah Neg y-travel 1200 mm z-travel 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Universal 3D measuring center, double-column, modern software, many accessories

Condition: new, Year of construction: 2024, Customizable Sawing Machine: The Ideal Solution for Small and Medium Sections Total Optimization, High Precision, and Maximum Speed in One Tool TRV 1200 is the perfect saw for tackling the daily challenges of processing single boards, whether raw or painted. With its advanced technology, this ultra-fast and efficient cutting system allows you to optimize each operation without stress for the operators. Whether for small or medium sections, the TRV 1200 is designed to meet all your needs, with a continuous work cycle that ensures flawless performance. Intelligent Operation and Full Automation With the innovative touch screen, you can easily upload cutting lists directly from the device or remotely, from your office. Once you select the desired optimization, the system autonomously handles all subsequent stages, including: Material introduction (*see Cursal accessories) Automatic advancement and positioning Immediate data transmission to the CNC and optimization Piece evacuation Quality, width, and length selection (*see Cursal accessories) Maximum Speed and Precision Without Compromise With TRV 1200, speed is exceptional: 195 m/min, self-limited by the Brushless servo motor. The synergy of a high-performance optimizer, an indestructible machine structure, and precise table control ensures flawless results. The CNC-driven motorized belts and pneumatic pressure wheels guarantee perfect material positioning. Total Versatility for Every Type of Processing The TRV 1200 perfectly adapts to various applications, from recovery work to defect cleaning, or even more complex tasks that require advanced software processing. It is the ideal partner for optimizing every phase of the process, ensuring maximum results with minimal waste. Advanced and Easy-to-Use Programming Software Over 100 preset cutting plans: customizable widths, quality, and cutting specifications Different optimization options: for commercial value, for scrap, for quantity, for length, and mixed optimization Optimization simulation to ensure the best material management Continuous monitoring of worked quantities Internal optimization within the machine body to simplify the process and save valuable space Advanced Numerical Control for Efficient Management The heart of the TRV 1200 is the powerful CNC, an industrial computer that ensures continuous production without stoppages. With the HD touch screen, you can easily import data via USB and access simple yet powerful software, quick to learn and easy to use. Moreover, you can rely on online remote assistance for real-time troubleshooting. Kdodpfxjv Ip Uzs Ah Nsg Discover how TRV 1200 can transform your production: speed, precision, and optimization at your fingertips.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 10,443 h, load capacity: 16,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,500 mm, power: 185 kW (251.53 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift truck - Diesel Load center: 1200 Fork width: 350 mm Fork thickness: 75 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Pneumatic Front tires size: 12.00 x 20 Rear tires Type: Air Rear tires Size: 12.00 x 20 Description: KoneCranes diesel forklift SMV 16-1200 C Year of construction: 2018 approx. 10443 operating hours Load capacity: 16000 kg / 1200 mm load center Lifting mast: Duplex clear view Lifting height: 5500 mm Construction height: 4500 mm Fork length: 2400 x 350 x 75 mm Engine: 6-cyl. Volvo diesel TAD871VE with 185 kW power Tires: Air 12.00 x 20 Fork positioner Sideshift level fork Cabin with heating and radio air conditioner Lighting front and back Work lights front and rear Sideshift, fork positioner, 3rd valve, 4th valve, Ksdpfx Aherlf Exo Nedg level fork