Hermle uwf 600 for sale

Your location was not identified (Edit)
Enter your address
or
Move
9
Damipnt Milling machine from apprentice workshop, fourth axis, Renishaw probe, electronic handwheel, Heidenhein control, Hours: about 9000 Many accessories. more
2
Gvv0sg - control: HEIDENHAIN TNC 155 - spindle speed: 40 - 6.000 1/min - tool holder: ISO 40 - quill stroke: 63 mm - travel range: X= 400, Y= 330, Z= 350 mm - table size: 630 x 335 mm - dimensions LxWxH: 3200 x 2400 x 1800 mm - weight: 1900 kg more
11
HERMLE Universal tool milling machine UWF 600 H Rail control SIEMENS 820 M NC round table Vertical millhead with pinole Coolant device Spray protection booth Condition: Machine comes from a training facility. At the moment, the machine is not ready for demonstration because the buffer battery is defective. Technical data: Noo7o9u Workspace along X: 400 mm Workspace across Y: 330 mm Working area perpendicular Z: 350 mm Pino-dub 63 mm Tool recording ISO 40 Speed range 40-6000... more
6
CNC Fraesmaschine Hermle UWF600 from a training workshop in top condition! Little on switch-on! Machine technically audited and ready to advance under electricity. Technical details: Manufacturer Hermle Type UWF600 Full cabin Coolant device Control Heidenhain TNC 355 for 4 axes With 3D keystroke Renishaw integrated into the controller 4th axis round table diameter 350mm (expandable to 600mm) Electronic hand wheel Travel xflexia 400mm yyear-olds 330mm zderly 350mm Djiupuz Speed... more
9
x-travel 320 mm Beogry9lyj y-travel 280 mm z-travel 350 mm Control Heidenhain TNC 155 table surface area 630 x 335 mm tool taper SK 40 spindle drive 3,35 kW milling head speed 40-6000 U/min stroke of quill vertical 63 mm feed range 1-2000 mm/min rapid traverse 5 m/min total power requirement 10,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,7 x 2,3 x 1,8 m * CNC path control HEIDENHAIN TNC 155 * Electronic hand wheel * Fixed angle table * NC-divider as [...] (B) * S... more
3

Universal Production and Tool Milling Machine HERMLE UWF 600 H

More Hermle Uwf 600
Berlin, GermanyGermany dealership location
17594 km
1992
ready for operation (used)
X-travel: 400mm, y-travel: 350mm, z-travel: 330mm, spindle clamping surface distance: 180-530mm, quill diameter: 85mm, quill stroke: 63mm, milling spindle diameter: 50mm, clamping table dimensions: 440x268mm, angle table dimensions: 630x335mm, number/ width/ distance of T-grooves: 5/ 14 H7 mm/ 63mm. Controls: HERMLE TNC 425. Qprup0mf more
5
tool taper ISO 40 Bebv30h8h7 spindle speed 40 - 6000 r./min Spindle capacity 3,35 kW diameter of round table 350 mm travel X: 320 mm travel Y: 280 mm travel Z: 350 mm quill stroke 63 mm overhaul by HERMLE 1996, protocol available path control Heidenhain TNC 155 NC rou... more
2
Werkzeugfräsmaschine Hermle UWF 802 M 07-07-109 Lieferzeit: sofort Nummer: 07-07-109 Maschinendaten Baujahr: ca. 1991 L x B x H: ca. 2000 x 1800 x 1800 mm Gewicht: ca. 1750 kg Sehr Guter Allgemeinzustand Technische Daten Digitalanzeige : 3-Achsen-NC-Steuerung Hermle Verfahrwege: X – Achse: ca. 500 mm Y – Achse: ca. 430 mm Z – Achse: ca. 400 mm Tischaufspannfläche: ca. 800 x 390 mm Spindel: Drehzahlbereich: ca. 71 – 3550 U/min Werkzeugaufnahme: ISO 40 ... more
6
Universal milling machine Hermle UWF 802 M with HS 401 control Super condition! Technical data: Bdnwlsa8n9 ᐳᐳ built around 1995 machines-Nr. 10254 ᐳᐳ solid angle table of ᐳᐳ speed: 17-3550 RPM ᐳᐳ feed continuously in 3 axes from 0 to 1600 mm / min ᐳᐳ power.: 6 KW ᐳᐳ traverse path X/Y/Z: 500/430/400 mm ᐳᐳ vertical spindle and horizontal Quill - SK40 ᐳᐳ hydraulic tightening system ᐳᐳ weight approx. 1800 kg ᐳᐳ extent length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: ... more
7
5 axle processing machine C 600 U Heidenhain Control 430 Travel: X 560 Y 460 Z 420 A+/- 115° Speed range: 0 - 12,000 rpm continuous ( ISO 40) Conveyor IKZ 40 Bar with belt filter system Oil mist extraction Bfg0o2chac The Parotec zero point system and the button are not supplied. more


hermle uwf...
daily

New machines via email!

Stay updated!
5
Manufacturer: Hermle Type: UWF 1001 H Built: 1991 B3t2oil Travel: 700x550x550 Control Haidenhein 355 Austtatung: Tool changer more
6
Hermle C 600 V, Built in 1999, Control Heidenhain TNC 430, Travel X/Y/Z 600/450/450 mm, electr. Handwheel direct measuring system, Tool changer 30 fold, SK 40, Package graphite extraction, Bfgxgrgv7e Table size 800 x 465 mm, Blocking air scales, Spänewanne, Spindle speed up to 12,000 rpm, Spindle cooling is now missing approx. 1500 € more
11
Y.O.M.: 1996 Rigid angular table Speed: 17 to 3550 rpm - Travel X/Y/Z: 500/430/400 mm Vertical pinole and horizontal pinole - SK40 Hydraulic tightening system Weight approx. 1800 Kg Mass length 1.8 m , width 1.8 m , height 1.9 m Dmjxqo2 With tipping table. more
5
Control: HEIDENHAIN TNC155 X-axis: 700 mm Y-axis: 550 mm Z axis: 500 mm Zafcxdu3 Clamping area of ​​the table: 1,000 x 490 mm Spindle speed range: 25- 3,150 rpm Space required (LxWxH) approx .: 3,500 x 2,800 x 2,100 mm Weight of the machine: 3.300 kg more
4
We sell a conventional universal milling machine. With automatic zetral lubrication, spindle brake, hydraulic. Tool tension, Bezbpohram Swivel head, SK 40 mount, machine light, digital display, three axes. Travel X 500 Y 430 Z 400, Operating Instructions Spare Parts Plan more
6
Univ. tool room milling machine HERMLE UWF 801 type Masch. No. 5089 built in 1981 Routes x 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 395 mm ISO 40 spindle adaptor Spindle speed 63 up to 2800 RPM 12 steps Feed X and Y 4 up 1600 mm/min.-stepless Feed Z 4 up to 1000 mm/min stepless Rapid traverse X and Y 1.6 m / min. Rapid traverse Z 1 m / min. Spindle motor 3 kW Power supply 400 Volt, 50 Hz Table load of 250 kg -3-axis digital display HEIDENHAIN ND 750 -Vertical milling head righ... more
6
Universal milling machine Hermle UWF 802 M with HS 401 control Super condition! Ni3fh Technical data: ᐳᐳ built around 1995 machines-Nr. 10608 ᐳᐳ solid angle table of ᐳᐳ speed: 17-3550 RPM ᐳᐳ feed continuously in 3 axes from 0 to 1600 mm / min ᐳᐳ power.: 6 KW ᐳᐳ traverse path X/Y/Z: 500/430/400 mm ᐳᐳ vertical spindle and horizontal Quill - SK40 ᐳᐳ hydraulic tightening system ᐳᐳ weight approx. 1800 kg ᐳᐳ extent length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: ᐳ... more
4
CNC web control: HEIDENHAIN TNC 155 Travel: X = 700, Y = 550, Z = 500 mm. Spindle speed: 25 - 3150 rpm, 3 gear steps. Spindle collection: SK 40 with hydr. Tool clamping. Angular table, clamping area: 480 x 1000 mm. Universal swivel milling head with drill pinole, stroke: 80 mm. Including Electr. handwheel, various tool holders, Coolant system and documentation. Weight: 3300 kg. The machine can be inspected under electricity and is immediately available. Ezah7kz Please also note my oth... more
1
x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm tool taper: HSK (SK40) control: Heidenhain TNC 425 quill stroke vertical: nicht bekannt mm turning speed range: 2400 - 24.000 U/min feed:: 1 ... 5000 m/min m/min table surface area: 850 x 440 mm table swivelabel +/-: starr ° table load: 500 kg Tool changer: mit 32 Stationen total power requirement: kVA weight approx.: 3600 kg dimension machine [...]: 2,5 x 3,0 x 2,1 m dimensions electric cabinet: L:1550 X B:550 x H:1700 mm Universal Milling and ... more
1
Bdtinpbjpo Lathe is equipped with all safety precautions lot's of accessoires included more
5
x-travel 700 mm y-travel 550 mm Bfatte9dqz z-travel 500 mm table surface area 650 x 395 mm spindle turning speed - stepless 20- 4200 U/min spindle taper ISO 40 DIN 2079 feeds x/y/z 1 - 5000/10000 mm/min. quill stroke vertical 95 mm drive spindle motor 12 kw control Heidenhain TNC 415 weight of the machine ca. 3,8 t dimensions of the machine ca. 5 x 4,6 x 2,5 m Electric 400 Volt Cooling equipment Fixed working table 1000 x 490 mm Vertical milling head swivelling +/- Cabin Opposite be... more
5
Y: 360 mm Z: 400 mm Speed range: 40-2000 RPM Spindle retainer: SK 40 DIN2079 Control: HEIDENHAIN TNC 155 Yr2nr8 Total power: 6 kW Machine weight: 2000 kg Dimensions (W x D x H): 2.8 x 2.9 x 1.9 m Condition: good, ready to use more
1
gernummer 1105-02690 Maschinenart Fräsmaschine - Universal Fabrikat HERMLE Typ UWF 1000 Baujahr 1988 Steuerungsart CNC Lagerort FRANKREICH Ursprungsland Deutschland Lieferzeit SOFORT Frachtbasis EXW Technische Details x-Weg 700 mm y-Weg 630 mm z-Weg 500 mm Bffaofe7fm Steuerung heidenhain 355 Werkzeugaufnahme SK 40 (DIN 69871) Tischaufspannfläche: 1000 x 490 mm Spindeldrehzahl Getriebestufe 1 25 - 400 1/min. Spindeldrehzahl Getriebestufe 2 401 - 1260 1/mi... more
5
x-travel:410 mm y-travel:310 mm z-travel:400 mm tool taper:ISO 40 Fr8e2efc spindle turning speed range:40 - 2000 U/min table-size:700 x 280 mm surface area:830 x 224 mm total power requirement:2,2 kW weight of the machine ca.:1,25 t dimensions of the machine ca.:1,4 x 2,1 x 2,0 m Control:Heidenhain TNC 145 more
6
x-travel: 600 mm y-travel: 450 mm Nkyqp z-travel: 400 mm control: Heidenhain TNC 425 spindle taper ISO: SK 40 DIN 69871 quill stroke vertical: mm distance between column - table edge: 190 (fest) vertikal mm spindle head swivable left - right: (Frässpindel) 90° ° distance between table/spindle: min./max.: 165/565 vertikal mm quill stroke vertical: 75 mm distance between table/spindle: min./max.: 165/565 horizontal mm turning speed range: 20 ... 4500 U/min tool changer with: 32 tools (Typ HTC 3... more
1
Hermle UWF1000 CNC X:700 - Y:550 - Z:500 mm Bdtinyspdp more
6
Universal milling machine Hermle UWF 802 M with HS 401 control Super condition! Technical data: M8lfz ᐳᐳ built around 1994 engines-Nr. 10545 ᐳᐳ solid angle table of ᐳᐳ speed: 17-3550 RPM ᐳᐳ feed continuously in 3 axes from 0 to 1600 mm / min ᐳᐳ power.: 6 KW ᐳᐳ traverse path X/Y/Z: 500/430/400 mm ᐳᐳ vertical spindle and horizontal Quill - SK40 ᐳᐳ hydraulic tightening system ᐳᐳ weight approx. 1800 kg ᐳᐳ extent length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: ᐳᐳ... more
4
3754-11 SIEMENS 1 HU 3102 Feed motor / axis motor 1.5 kW Formerly HERMLE UWF 1000 / Z - axis Dimensions approx. 500 x 200 x 200 mm Gtzu3k approx. 45 kg more
2
Machine No.: 10119, Table: 800 x 390 mm, Speeds: 71 - 3550 rpm, Spindle holder:, SK 40 with automatic tool clamping, Ways: Gutst3j x= 500 mm, y= 430 mm, z= 400 mm, Drive: 3.0 kW, Comment: automatic central lubrication, Coolant device, Weight: 1750 kg, more
2
Hermle UWF 801 universal milling machine with Heidenhain digital display and manual tilting swivel table Technical data: Spindle speed: 50-2,800 min Recording: SK 40 Travel axles: X-axis: 500mm Y-axis: 430mm Bzumexb Z-axis: 400mm Manual tilting pantable more
10
x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 407 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7,0 / 8,5 kW tool taper SK 40 stroke of quill vertical 75 mm tool clamping 10 kN work table: table surface area 900 x 458 mm max. table load 400 kg T-slots 7x 63 x 14H7 Tool-Presetter: number of toolpositions 32 pos. max. tool length 250 mm max. tool diameter 100 mm max. tool weight 8 kg feeds: feed range 1 - 6.000 ... more
1
Hermle UWF 900 E Bdtinfqd2n more
5
x-travel:700 mm y-travel:550 mm z-travel:500 mm feed speeds:1 - 2000 mm/min Table area:800 x 500 mm rapid traverse:5 m/min spindle turning speed range:25 - 3150 U/min spindle taper ISO:40 spindle diameter in front bearing:70 mm spindle motor:7 kW quill stroke:100 mm total power requirement:12 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:3,5 x 2,8 x 2,1 m Uwwj7xe3s HEIDENHAIN TNC 355 CNC control for 4 axis NC table [...] swivelling Heidenhain touch probe coolant device, mot... more
6
Universal milling machine Hermle UWF 802 M with HS 401 control Super condition! Technical data: ᐳᐳ built around 1994 engines-Nr. 10546 ᐳᐳ solid angle table of ᐳᐳ speed: 17-3550 RPM ᐳᐳ feed continuously in 3 axes from 0 to 1600 mm / min ᐳᐳ power.: 6 KW ᐳᐳ traverse path X/Y/Z: 500/430/400 mm ᐳᐳ vertical spindle and horizontal Quill - SK40 ᐳᐳ hydraulic tightening system ᐳᐳ weight approx. 1800 kg ᐳᐳ extent length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: Fibqqekj... more
6
- Electronic manual control module - ICZ package /12,000 / SK40 - conveyor (belt filter system not available) - NC swivel roundtable of 280 HEIDENHAIN - Power board PL 405 - Electr. Thermal expansion compensation - Blow-off device - Tool breakage monitoring - Rotoclear - Oil mist extraction - Chip-washing gun (ICZ) - Set-up rectangular table top 600 x 370 - Sk40 measuring system (HEIDENHAIN) - Signal light with acoustic signal - Hydraulic extension Workspace X - Distance 600 mm ... more
5
With CNC control, HEIDENHAIN TNC 415 Travel 700 x 550 x 550mm Tool changer: 32-fold Weight: approx. 4750 kg Price 4,500,-€ free loaded. Z- Axis engine brake does not work properly ! Fg8f8p3f more
5
from the dismantling of a Hermle UWF1000: NC round table / 4th axis Built: 1987 Nnbj2 Condition: used / used This offer is aimed at professionals. Prices quoted are net. We are happy to prepare a personal offer for you. To do so, please send us your full contact details. Offer subject to change, intermediate sale reserved. Internal No.: 1280 more
1

Toolroom Milling Machine HERMLE UWF 802 M

More Hermle Uwf 802
Bergstraße, DeutschlandGermany
18020 km
1990
ready for operation (used)
Aktueller Neueingang Jvb0by Aus 1. Hand Bildungszentrum 4755 HERMLE UWF 802 M Details in Kürze more
4
Universal machine milling machine HERMLE UWF 802 X 500 Y 430 Z 400 mm - vertical head with drill pinole SK 40 - Speeds 71-3150 - Conversion of the HS 401 controller to HEIDENHAIN TNC 124, as there are no spare parts for the 401 Bfakyktipe more there ! Stepless feeds and rapids in 3 axes - Machine with fixed angular table - Cabin - Halogen lamp - Coolant device - swivel vertical head with Counter bearing to horizontal milling. First-class condition from medical technology / experime... more
5
CNC Universal Machine Milling Machine HERMLE UWF 902 H With railway control Heidenhain TNC 426 Built: 1996 Travel: X 600 Y 450 Z 500 Speed range: 20 - 6300 rpm continuous Qxaccspf With the following accessories: Rigid angular table 900 mm x 530 mm clamping surface Electronic handwheel Thermal expansion compensation Y axis Oil circulating lubrication Full-protection cabin with sliding doors and interior lighting 4 pcs height-adjustable machine shoes Coolant device Operating i... more
7
Travel X/Y/Z: 600 x 450 x 500 mm 34-Fach tool changer Speed range 20-6300 RPM. S3no0h Electr. Handwheel, Spindle SK 40 CAB Coolant system more
6
from the dismantling of a Hermle UWF1000: Spindle motor / side loop. Engine Munhf0 Manufacturer: Siemens Type: 1 GL5114-0FY40-6HU7-Z incl.: 2CW6 145-8 blower Condition: used / used This offer is aimed at professionals. Prices quoted are net. We are happy to prepare a personal offer for you. To do so, please send us your full contact details. Offer subject to change, intermediate sale reserved. Internal No.: 1277 more
5
Hermle UWF 1001 milling machine. Built: 1990 The machine has a defective clamping cylinder and resulting oil loss. the machine has a total hours of around 70,000 hours Machine would be incl. the vice which can be seen on the picture Qugvb0vz more
3

Machining Center - Vertical HERMLE UWF 902 H

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
18055 km
1995
used
x travel mm y travel mm z travel mm ----- WORKING RANGE -CUBIC- - number of processing axes (excl parallel axes) 3 - X-axis travel 600 mm - Y-axis travel 450 mm - Z-axis travel 500 mm TABLE - table surface (left-right) 900 mm - table surface (front-back) 460 mm MILLING SPINDLE / HEAD - spindle revolutions (max) 6300 /min - tool fixture: ISO SK 40 ELECTRICAL SPECIFICATIONS - mains voltage 400 V - mains fr... more
11
Condition is not checked. Technical data: Brand: Hermle Type: UWF 801 Routes X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 395 mm Spindle holder ISO 40 Spindle speed 63 to 2800 rpm 12 steps Feed X and Y 4 to 1600 mm/min. infinitely variable Feed Z 4 to 1000 mm/min. infinitely variable Rapid speed X and Y 1.6 m/min. Pifjznoa Rapid response Z 1 m/min. Spindle drive 3 kW Mains connection 400 volts, 50 Hz Table load max. 250 kg more
13
CNC-milling machine Trail: X: 375 Y: 275 Z: 340 Beweihnu9s Table size: 700x285 Speed range: 40-2000 U/min Spindle intake: ISO 40 Pino-boost: 63 Control: Heidenhain TNC 155 Elektr. Hand wheel, total power 7kW, machines weight 1,500 kg. In the case of too fast procedures of the Z axis, the machine goes to the error of gross positioning error. The Z axis must be tested. The milling machine is used. Any warranty will be excluded. The price is an exct dismantling and transport. more
3

Tool room milling machine HERMLE UWF 802 M

More Hermle Uwf 802
Waiblingen, GermanyGermany dealership location
18001 km
1993
good (used)
with HEIDENHAIN TNC 124 control = Way X/Y/Z 500/430/400 mm 73zmz8lg8 71-3.550 speed range RPM. Vertical milling head with ausf. Quill Spindle SK 40 Universal Swivel Tilt and swivel table 650 x 395 mm Coolant system more
2
from the dismantling of a Hermle UWF1000: Permanent Magnet Motor Manufacturer: Siemens Type: 1 HU3102-0AD01-Z Condition: used / used Be7bojdf7y This offer is aimed at professionals. Prices quoted are net. We are happy to prepare a personal offer for you. To do so, please send us your full contact details. Offer subject to change, intermediate sale reserved. Internal No.: 1276 more
6

Machining Center - Universal HERMLE C600V

More Hermle C 600
Korschenbroich, GermanyGermany dealership location
18074 km
2003
used
control Heidenhain 530i x-travel 600 mm y-travel 450 mm Ru3xa72p z-travel 450 mm Weight 6000 kg tool adaptor SK 40 13394 h drive hours 39604 h Number of working hours 53000 h more


hermle uwf...
daily

New machines via email!

Stay updated!

to

to

Edit search
HERMLE UWF 600
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.