Used Turning Tensioner for sale (9,520)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Ffsdpfowz Rifex Ac Nju Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Fedpsxf Uwxefx Ac Nefu Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 650 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 40, number of spindles: 30, Fanuc 32i CNC – Model A SPINDLE: Tool holder taper: ISO 40 Rotation speed: 12.000 rpm AC motor power: 26 kW TRAVELS: Fjdpfx Aew U Uttsc Nsfu X-axis travel: 1.270 mm Y-axis travel: 670 mm Z-axis travel: 625 mm TABLE: Dimensions: 1.400 x 670 mm Permitted weight: 1,000 kg TOOL CHANGE: Number of tools: 30 Tool dimensions: 80 x 300 mm Maximum tool weight: 8 kg Weight: 8.500 kg Machine complete with: • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LYA – CNC Turning Center – 2020– Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LYA CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: Siemens Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Fedjyftfiopfx Ac Nefu Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2020 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LMA – CNC Turning Center – 2019 – Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LM CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Fodpfxsyftatj Ac Njfu Control system: SIEMENS Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2019 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Y axis (+/-105mm), Ffodpfew Nwfbjx Ac Nsu C axis 0.001 degrees, B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,

Condition: good (used), Year of construction: 1990, 2 UNITS available CONTROL FANUC 0 CNC Lathe Technical details: Turning diameter 165 mm Turning length 200 mm Control Fanuc 18 TB X-axis 2x 195 mm Z-axis 265 (B 780) mm Bar passage 50 mm C-axis 0,001° Turning speeds: 50-5.000 U/min Tool turret with 12 work positions 2 Fedpfed S U Dgex Ac Nsfu x12 Turning speeds : 180-3600 U/ min Accessories: Chip conveyor

Condition: not inspected (used), CNC lathe MONFORTS Type RNC 4 Ser. No. 133/72 CNC control, SIEMENS, SINUMERIK Chip conveyor and oil mist extraction Ffodpfx Asyfnc Ajc Neu

Condition: used, Year of construction: 2014, Mazak Quick Turn Smart 250 CNC Turning Centre with Mazatrol Smart CNC Control, Kitagawa BB 210 Powered 3 Jaw Chuck, 12 Position Tool Turret, Tailstock, Max Spindle Speed 4000rpm, Filtermist FX 4002 Oil Mist Extractor. Machine Weight 4610kg. S/No. 240540 (2014) Includes Various Tool Holders, Sleeves and Centre in Turret and Boxes. Country of Origin: United Kingdom Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Ffsdpfx Acoyhd Exo Nju

Condition: used, Year of construction: 2006, Mazak Quick Turn Nexus 350m CNC Turning Centre with Mazatrol 640T Nexus CNC Control, Max Swing 750mm Diameter, Standard Machining Diameter 336mm, Max Machining Diameter 420mm, Bar Work Capacity 102mm, Spindle Speeds Max 4000rpm, 12 Tool Turret, Kitagawa Powered 3 Jaw Chuck, Tailstock, Filtermist FX4002 Oil Mist Extractor, Machine Weight 7500kg. S/No. 184642 (2006) Includes Various Tool Holders in Turret, Driven Tool Holders and Sleeves. Country of Origin: United Kingdom Ffedpfxeyhdyco Ac Nju Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Fedpfxeyhdw Ie Ac Nofu

Condition: excellent (used), Year of construction: 2019, operating hours: 9,100 h, functionality: fully functional, We offer: CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Technical Data: Max. turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Travel axes: x1 axis: 675 mm y axis: +/- 150 mm z1 axis: 1,562 + 164 mm b axis: +/- 120° a axis: 1,542 mm Main spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Counter spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Milling spindle: Speed range: 0 – 20,000 rpm Tool holder: Capto C6 Number of tool stations: 114 positions Feed rates: x axis: 50 m/min y axis: 40 m/min z axis: 50 m/min a axis: 36 m/min b axis: 100 rpm Hollow clamping device: Ø 67 mm Operating hours: approx. 9,100 h Spindle hours: approx. 4,600 h Technical features and accessories: - High/low pressure chucking system for main and counter spindle; programmable hydraulic 2-stage clamping pressure regulation - 8" hollow chuck Ø210 mm, hydraulic 3-jaw chuck by Kitagawa BB208A621 on main and counter spindle, incl. hollow clamping cylinder - Double foot switch with protective cover - B axis with 0.0001° positioning - Tailstock function for the counter spindle - Self-centering hydraulic steady rest, centering diameter 20 – 165 mm, by SMW SLU-X3.1 - Machine designed for coolant emulsions - Hinged belt chip conveyor - Coolant gun - Coolant shower at the chuck of main and counter spindle - Compressed air blow-off system for chuck on main and counter spindle - Coolant supply through the counter spindle - Oil separator as belt skimmer - ICS, compact filter system / paper band filter Knoll KF110/700, 70 bar, 700 l tank - Direct measuring systems - Spindle probe system with wireless transmission, Renishaw RMP 60 - Automatic tool setter for the turning-milling spindle - EtherNet I/P interface - Electrical I/F for multi-channel bar feeder/loader wired to terminal strip - Air filter unit for drying and oil separation - 10 additional M functions - 95 kVA three-phase autotransformer - 3D quickSET - Pocket and island milling function - Fast fixed cycles - Program restart Fsdpfx Ajyhdqnoc Njfu - Optional skipping of a program block - Workpiece unloader with conveyor belt and collection tray Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Subject to technical changes, errors, and prior sale!

Condition: used, Year of construction: 1995, functionality: fully functional, We offer this used CNC lathe MAZAK MULTIPLEX 620 MARK 2, year of manufacture 1995, currently located in Spain. Immediately available. Ffsdoyhdf Eopfx Ac Nou Control: MAZATROL T PLUS – Turning diameter: 200 mm – Number of spindles: 2

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 Fodpewlvlgsfx Ac Nefu MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, For sale is a fully functional and highly precise GILDEMEISTER CTX 200 CNC lathe, manufactured in 1995. This machine is renowned for its high repeatability, speed, and accuracy, making it ideal for automatic turning operations. It is sold with a comprehensive set of tooling, allowing for immediate commencement of work. Machine Data: ● Model: GILDEMEISTER CTX 200 ● Year of Manufacture: 1995 ● Condition: Fully functional, very accurate, repeatable, and fast ● Maximum Turning Diameter: 210 mm ● Maximum Turning Length: 350 mm ● X-axis Travel: 160 mm ● Tool Magazine Capacity: 12 pcs. ● Minimum Spindle Speed: 25 rpm ● Maximum Spindle Speed: 5000 rpm ● Spindle Bore: 42 mm ● Tool Holder Type: VDI 20 ● Control Language: English ● Operating Hours: 79,000 h ● Additional Equipment: Chip conveyor Included with the Lathe: Full Tooling Package: ● VDI20 tool holders ● External turning tools ● Boring bars ● Compensating tap holder for threading ● Large quantities of taps, drills, dies ● Numerous packs of interchangeable inserts (for every tool type) Fedpfx Acewm Hh Uo Nefu ● 3x modular drills ● Bar puller (for automatic operation) ● Set of soft jaws for the chuck ● Complete set of ER25 and ER32 collets from ø2 to ø15 Purchase Information: ● Transportation and loading: Buyer's responsibility ● Reason for Sale: Business closure

Condition: excellent (used), We offer 4 pieces of CNC turning centers by OKUMA, model LVT400. Machines are in very good technical condition and ready for immediate operation. Perfect for precise machining of medium-sized parts. 🔧 Technical specifications: • Max. turning diameter: 280 mm Ffedpfx Acswn Ra Rj Nju • Swing diameter: 320 mm • Max. turning height: 200 mm • Max. part diameter for table pallet: 160 mm • Rapid traverse: o X-axis: 60 m/min o Z-axis: 30 m/min • Spindle speed range: 40 – 4000 rpm • Drive power (40 / 100 % DC): 22 / 15 kW • Number of tool positions: 12 (VDI 40) • Live tools: No

Condition: used, Year of construction: 2018, control CELOS / F31iB5 / Mapps 4S max. turning diameter 670 mm turning length 1.538 mm bar passage max. 81 mm x1 axis 675 mm y-axis mm z1 axis 1.562 + 164 mm b-axis ° a-axis 1.542 mm x2-axis 200 mm y2-axis + / - 40 mm z2-axis 1.542 mm max. turning speeds 4.000 U/min power capacity 26 / 22 kW spindle passage Ø 91 mm max. turning speeds 5.000 U/min power capacity 22 / 18,5 kW spindle passage Ø 73 mm turning speed range 0 – 12.000 U/min power capacity 28/ 23 kW tool taper Capto C6 number of tool places 76 Pos. max. tool diameter Ø 70/ Ø 130 mm Fedpfeyfh R Hox Ac Njfu max. tool length 400 mm max. tool weight 8 kg Number of tool holders 10 pos. Shank length for square tool 20 mm Shank diameter for boring bars Ø 32 mm power capacity 5,5/ 5,5/ 3,7 kW torque 16,9/ 13,1/ 8 Nm x-axis 50 m/min y-axis 40 m/min z-axis 50 m/min A-axis 36 m/min x2-axis 25 m/min y2-axis 18 m/min z2-axis 40 m/min b-axis 100 U/min Hollow clamping device Ø 67 mm Number of working hours ca. 23.250 h spindle hours ca. 8. h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Kitagawa hollow chuck on main and counter spindles - Dual foot switch for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant type: Water-soluble coolant - Chip conveyor - Coolant system 70 bar, Hydrajet brand - Compressed air on spindle 1 and spindle 2 - Automatic measuring arm on the main spindle - Workpiece ejection on the spindle - Parts unloader - Preparation for bar feeder - Interface for mist separator - 2 RotorClear units - 4-color indicator light - Multi-Dry filter - Automatic probing and tool correction - Memory expansion - Cycle for plane transformation - Coolant spray gun Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2018, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Ffodpfx Acoyg Sh Se Nou

Condition: used, Year of construction: 2008, Ma.-No. 204412, Control Mazatrol Matrix Nexus, travel X/Y/Z 260 x 150 x 1,605 mm, max. spindle speed 3,300 rpm, max. spindle bore 102 mm, max. turning diameter 420 mm, max. turning length 1,500 mm, 12-position tool turret with driven tool stations, tool holder VDI 50, max. speed 4,000 rpm, operating hours approx. 81,940, three-jaw chuck, hydraulic steady rest, make SMW Autoblok, tailstock, tool measuring system, chip conveyor, make Mayfran, type QTN300M, tool and accessory package. PCB defective! Ffjdpeyffxhsfx Ac Nou +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 2011, Ma.-No. 327233239, control unit Mazatrol Matrix 2, travel paths X/Z 450 x 150 mm, main spindle, sub-spindle, 2x 8-position tool turrets with driven tool stations, tool holder VDI 40, 2 spindle units, max. spindle speed 5,000 rpm, max. machining length 530 mm, max. spindle bore 51 mm, tool measuring system, operating hours approx. 34,987, gantry loader, make Mazak, type Flex-GL100F, conveyor belt, L 6,000 mm, workpiece table, belt filter unit, make Knoll, type KF 400, chip conveyor, make CROMAR, tool and accessory package +++ Note: This machine is part of an online auction! +++ Ffedpsyffvtsfx Ac Nou

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 Ffedox Ahg Uepfx Ac Nju +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: BUDERUS, Model: U-Grind 800, Year of manufacture: 2017, Machine No.: 9438, Control system by Rexroth, Type: IndraControl V, Max. workpiece diameter: 250 mm, Max. workpiece length: 800 mm, Multifunction head by WMZ, Type MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Max. speeds: C-axis workpiece spindle: 1,000 rpm, High-performance external grinding spindle: 5,100 rpm, High-frequency internal grinding spindle: 30,000 rpm, Max. feed rates: Z-axis 30 m/min, X-axis 60 m/min, Workpiece spindle by WMZ, Type W160A, Tailstock by WMZ ZN28-011-00K, Coolant system, Cooling unit by Rittal, Type SK3303500, Chip conveyor, Automation module by Upload, 1 lot of fixtures and accessories +++ Note: Machine is part of an online direct sale! +++ Ffodpex Ahk Hofx Ac Neu

Condition: used, Make: BUDERUS, Model: U-Grind 800, Year of manufacture: 2019, Machine no.: 2360, Control system: Rexroth, Model IndraControl V, electronic handwheel, IndraControl operator panel, Maximum workpiece diameter: 250mm, Maximum workpiece length: 800mm, Multifunctional head from WMZ, Model MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Max. C-axis workpiece spindle speed: 4,500 rpm, High-performance external grinding spindle: 5,100 rpm, High-frequency internal grinding spindle: 30,000 rpm, Maximum rapid traverse: Z 30 m/min, X 60 m/min, Multifunctional head from WMZ, Model MFK 54-50 (external grinding, internal grinding, hard turning, measuring), Workpiece spindle from WMZ, Model W160A, Tailstock from WMZ ZN28-011-00K, Coolant system, Cooling unit: Rittal, Model SK3303500, Chip conveyor, Automation module from Upload, 1 lot of chucks and accessories. +++ Note: The machine is part of an online direct sale! +++ Ffjdpfox Ahkmsx Ac Neu

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control system: Siemens brand, Type: Sinumerik 840D sl Powerline, 2 workspaces, 2 cross slides, X/Z traverse path, 2 spindles, Speed, C-axis workpiece spindle: 3,000 [rpm], High-frequency internal grinding spindle: (51,000 [rpm]) (for grinding arbor), Max. feeds Z 30 m/min, X 90 m/min, Max. workpiece diameter: 100 mm, Max. workpiece length: 50 mm, 2x 8-position tool turret, Tool holder: Capto C5, Workpiece automation with drag conveyor system and gripper, Coolant system, Paper band filter, Oil separator, Manufacturer: Mahle, Type: LGA601, Oil mist extraction, Recooling unit, Manufacturer: Hydac, Chip conveyor, Manufacturer: Astos Ffodox Ahivepfx Ac Nou +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine no.: ZN022, Control: Siemens Sinumerik 840D sl Powerline including handwheel, 2 spindles, 2 workspaces, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, driven tool stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage +++ Note: Machine is part of an online open sale! +++ Ffodsx Ahfwjpfx Ac Nsu