CNC Turning- and Milling Center

TRAUB TNX 65

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 12 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 24 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 175 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 28 [kW] Bdodpfouhadzex Adrsd - Spindle speeds : 7.000 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0,001 [°] - Travel : 700 [mm] UPPER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 95 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.450 x 2.318 [mm] - Machine height : 2.258 [mm] - Machine weight : 10.000 [kg] MACHINE HOURS - Number of working hours : 50000 [h] EQUIPMENT - CNC : Traub TX8i-S - Electronic handwheel - 3 colors status lamp - Coolant tank : RESY * with high-pressure pump * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Number of turning tool holders : 6 - Number of fixed tool holders : 33 - Collet chuck : 2 HAINBUCH

Condition: excellent (used), Year of construction: 2008, Technical data: Working length: 6100 mm Distance between uprights: 5230 mm Press force: 400 tons CNC control: OPERATOR II graphic TFT screen 14" Number of controlled axes: 8 Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Stroke: 350 mm Overhang: 420 mm Laser monitoring: FIESSLER Motor power: 38.5 kW CE marking Dimensions (length x width x height): approx. 6300 x 2500 x 3600 mm Weight: approx. 36.5 tons Note: Table extends approximately 450 mm into the floor. Bdodpey D Sb Uefx Adrjd Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: very good condition only 9,200 operating hours in the meantime, we have stored the machine and removed the table The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees Bjdpsyw H Szefx Adrjdd SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Bdedpfxox A Hdfs Adrsd

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Bdedpfx Ajxmfc Uedred Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm Bodpfxow E Nnbj Adredd toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: new, functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Bdjdsu Rnqqspfx Adrsd

Condition: used, Year of construction: 1987, x-travel 500 mm Bdedpfx Adjt Hw H Eorod y-travel 380 mm z-travel 300 mm Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m

Condition: new, Year of construction: 2023, operating hours: 10 h, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke Z1 [mm]: 50mm /160mm Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 2.2 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 70 C-axis with 0.001° Stroke Z2 [mm]: 215 Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Quantity: 4 driven ER16 modular drilling/milling spindles Bsdpfxstw Uzvj Adrsdd - Power: [kW]: 1.1 (S6000) - Front drilling unit for 5 drilling quills diameter 25 mm Cross slide counter spindle - Quantity: 2 driven drilling/milling spindles ER16 modular - Power: [kW]: 1.0 (S6000) Back machining 6 driven tools axial ER16 2 driven tools radial ER16 3 turning tool holders 12x12 XD20III 1.0 kW (Fanuc) 1.02 kW (Siemens) TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 5 Number of spindle axes: 2 Rapid traverse speeds m/min: 32m/min (Z1,Z2,Y,X2) ; 24 m/min (X1) Connected load [KVA]: 15 CONTROL Control type: Fanuc 0i-TF Number of axes: 5 (X1, Z1, Y1, X2, Z2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface to bar feeder Interface for JBS ACCESSORIES / INCLUDED Alignment shoes with leveling elements Tool box and service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English (maintenance and operating instructions incl. parameter list and test log)

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Bdedpfx Adeq U Rm Hored Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.