Used Turning Conveyor for sale (17,545)

Year of construction: 2017, condition: excellent (used), I sell the turning device AUTOMATICA DVPGP. Year 2017. Cedpfew Am Ndsx Aiieri One side feeding suitable for line. Element width up to 1400mm Total length 4500mm Available immediately. Ready for work, possible to test.

Condition: used, mesh wire belt left hand turn all stainless steel belt width 900 mm adjustable speed Crodpfx Aszzlrfjiioi

Condition: used, 180° stainless steel wire belt belt width ± 1.000 mm left hand turn all stainless steel mobile 0,18 kW dimensions : ± 3.750 x 2.100 x 1.300 mm Codpfozzk U Eex Aiijri

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, length of the shorter conveyor table – 1300 mm, width – 1900 mm length of the longer conveyor table – 6050 mm, width – 1630 mm length of the roller table – 1900 mm, width – 1630 mm length of the turning table – 4400 mm, width – 1600 mm Cedsz Szpyopfx Aiijri year of manufacture: 2018 maximum speed: 20 m/min

Condition: good (used), length 5 meter. working diameters 220 mm - 600 mm Cedpfxjv Scfzs Aiiori

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Year 1990. Crodpfxsktfvfo Aiiji One side feeding suitable for line. Element width 1250 + 1250mm Total length 6500mm Available immediately. Ready for work, possible to test. With full manuals.

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: CE marking, OTT TWISTER Edge Banding Machine This is a single-sided edge banding machine, operated from the right side, designed for applying and processing edges made of veneer, plastic, and solid wood. Year of manufacture: 2014 1. Technical specifications and dimensions: • Banding thickness: 0.4 – 10 mm. • Part width: minimum 70 mm. • Part height: 8 mm to 60 mm. • Part length: minimum 150 mm. • Continuous speed: 18 m/min. • Working height: 880 mm. • Machine dimensions: height 1,600 mm, width 1,100 mm, length 7,200 mm. Cjdpfx Aiszr Nkgoisri • Weight: 3,250 kg. • Operating voltage: 400 Volt, 50 Hz. 2. Key working units: • Pre-milling unit: equipped with 2 motors (2.2 kW, 12,000 rpm) for milling the front surface. • Glue application (Vario-Melt): application roller with dosing automation and modular Combi Melt system for EVA and PUR adhesives. • K13 trimming unit: 2 motors (0.2 kW) for precise edge trimming with a tilting option of 0/5°. • Rough and fine milling unit: for processing edge overhang and radius milling. • AKF copying milling cutter: automated unit for longitudinal and corner processing with a function for veneer and postforming. • Scraping units: includes a radius scraper ZKc (for PVC edges) and a surface scraper ZKf (for removing excess glue). Accessories • PUR package: includes a quick-change head and a hopper. OTT TRANSLIFT Transport System This system is used for automatic handling of parts and returning them to the operator. • Manipulator: single-column, with suction, maximum load capacity 60 kg. • Movements: rotation 0°/90° and transfer to the return belt. • Return conveyor belt: width 900 mm, length corresponds to the machine. • Part limits: maximum length 3,000 mm, maximum width 1,300 mm.

Year of construction: 2020, condition: used, functionality: fully functional, overall weight: 1,900 kg, total length: 6,800 mm, total width: 2,850 mm, machine/vehicle number: 30387, We are pleased to offer a used Wehrmann roller conveyor from 2020, equipped with a conical swivel for handling panels and IMA Meinert Drehstation DK type roller feeders. This modern solution enables efficient and precise handling of panels in the production process, ensuring high performance and reliability. It is ideal for industrial applications where efficiency and the quality of component transport are paramount. Crsdpfxozgch Ij Aiioi The option to purchase the entire line is available, including a two-chamber automatic loading station and a double-sided edging machine, the IMA COMBIMA I K/II/R75/760/V/R3.

Condition: used, Year of construction: 2014, functionality: fully functional, 4-AXIS CNC TURNING CENTER • Color: Light gray/anthracite RAL7035, 7016 • Main spindle 26 kW • Counter spindle AS 11 kW • Bar diameter 65 mm • Control system Fanuc 31i B-5 • Counter spindle can be lowered • 2 Y-axes *50/-40 mm, 4-way guided • X-axes with flat guide • 2 turrets with 12 tool stations each • 24 powered tool stations. Torque 47 Nm. • 2 C-axes • Bar loader interface • Controlled parts catcher, can be used for main and counter spindles • Finished parts conveyor belt, installed lengthwise, 500 mm long • Hinged belt chip conveyor with discharge height of 820 mm • 2 coolant pumps at 7 bar including filter • Foot switch for chuck operation on the main spindle • Internal flushing system with 4-bar pump • Flushing gun, 4 bar, for cleaning the work area • Intelligent handwheel Program execution with simultaneous movement of all axes MACHINE EQUIPMENT - Conveyor belt for machined parts Belt width/length 300x800 mm, Discharge on the operator side - Measuring probe, swiveling, with 2 heads for tool measurement Turret, top and bottom - High-pressure coolant pump, 18 bar for 2 turrets incl. coolant filter Pump capacity 20 l/min - MANUAL GUIDE i, dialog programming Turning/milling cycle, 3D simulation Manual (on CD) - SBS tool breakage and wear monitoring - Programmable axis mirroring Bar loader magazine Bar loader magazine FMB turbo 5-55 Bar length max. 3200 mm Oil lubrication for the bar Bars 5-55 / turned down to 50 mm Loading level 250 mm Guided by roller guide, can be changed to guide chuck (polygonal) Precise positioning during insertion Interval mode for polygonal material Residual piece ejection to the rear (max. 530 mm) Cjdpj Ah Scnofx Aiijri

Condition: good (used), Year of construction: 2011, Automatic unloading line for box pallets. The line is manufactured by MEGA and consists of roller conveyors, a turntable, and a tipper. Suitable for all types of vegetable unloading from box pallets / bins. Csdpfx Aiswylikeijri

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Crodjwvrfkjpfx Aiioi Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:102 mm Main spindle: Technology:Direct drive spindle Speed:4,000 rpm Power:48 kW Torque:680 Nm Bar capacity:102 mm C-axis:0.001° Chuck:Hainbuch Spanntop 100 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow Clamping Cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:4.000 rpm Power:48 kW Torque:680 Nm C-axis:0.001° Chuck:Hainbuch Spanntop 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Partially Hollow Clamping Cylinder 848 mm Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 barCoolant Coolant Temperature Control Tool monitoring:Easy Tool Monitor Tool Breakage Monitoring:Swivel Wire Touch Probe:Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Csdpj Ah Adbsfx Aiiori Software Option IV:Gear Cutting and Gear Shaping Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop :

Condition: good (used), Year of construction: 2015, Ref. -No.: 10716 Manufacturer: DMG MORI Type: CTX alpha 500 Year of construction: 2015 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 004xxxxx Tool holder type: VDI 30 X stroke: 260 mm Z - stroke: 550 mm Bar passage: 65 mm Turning Diameter: 500 mm Turning Length: 520 mm Spindle Speeds: 5.000 RPM Spindle Bore: 76 mm Tool changer: 12 Pcs Crsdpfxo Ahw R Es Aiiei Operating hours: 38.500 Hours Weight Of The Machine Ca.: 4.8 t Further information: Including chip conveyor, transport securing equipment, documentation and accessories. The machine has been cleaned and can be inspected under power.

Condition: good (used), Year of construction: 2021, Ref. -No.: 10630 Manufacturer: MATEC Type: HV 700 Year of construction: 2021 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany X-Travel: 2600 mm Y-Travel: 700 mm Z-Travel: 950 (horizontal) / 900 (vertikal) mm Swivel range: ± 105 ° Table speed range: max. 700 min/-1 Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 50 Turning Speeds: 20 - 15.000 RPM Max. Torque: 195 (40 % ED) / 150 (100 % ED) Nm axes: 5 + Spindel Drive Capacity - Spindle Motor: 41 (40 % ED) / 31 (100 % ED) kW Operating hours: Steuerung ein 19.381 / Maschine ein 7.220 / Programmlauf 2.285 H Internal cooling: 20 / 40 bar Holding torque: 5.000 Nm NC rotary table: 2.000 kg Tabletop C-axis: NC-Rundtisch Ø 750 mm, im Maschinentisch eingelassen Further information: - NC swivel head, infinitely variable ± 105°, torque drive, swivel radius 250 mm - Motor spindle HSK-A63, 20 - 15,000 rpm, 41 kW (40 % duty cycle) / 31 kW (100 % duty cycle) - NC rotary table Ø 750 mm recessed into the machine table (torque drive, max. 700 rpm, indexing accuracy ± 2.5", max. load 2,000 kg) - Direct measuring system X, Y, Z axes (absolute) - 50 tool pockets - Internal coolant supply 20 bar and 40 bar with paper band filter (450 l) - Hydraulic motor spindle clamping for turning operations - Partition wall for pendulum (dual-station) machining - Automatic safety doors - 3D touch probe with radio transmission - Renishaw RTS tool setting probe with radio transmission (2 pcs) - Software option KinematicsOpt incl. calibration ball with holder - Dynamics package for free-form surfaces - Collision monitoring SETAC-ADVANCED - Electronic handwheel (portable) - Full work area enclosure with roof - Bellows with steel slats - Chip conveyor, special version for high-volume machining - Mechanical air filter CMC 1500 (2 pcs) Ceds Ahmvmepfx Aiijri - Cooling unit for electrical control cabinet - Flushing gun - Central oil lubrication - LED work area lighting - Installation elements The machine can be viewed under power by arrangement.

Condition: new, Year of construction: 2020, Skid Conveyor Technology Codpfx Asznh T Sjiisri Eisenmann 6-meter SKID roller conveyor

Condition: good (used), Year of construction: 2004, CNC turning/milling center Manufacturer: MAZAK Machine model: Integrex 200 2S Control: Mazatrol 640 MT pro Year of manufacture: 2004 TECHNICAL DATA Swing diameter, max. (mm) 660 Turning diameter, max. (mm) 660 Max. turning diameter over slide (mm) 500 - 660 Bar machining up to Ø (mm) 64 Workpiece weight - Chuck workpiece (kg) 100 - Shaft workpiece (kg) 150 Travel distances - X-axis (mm) 580 - Z-axis (mm) 1,045 - Y-axis (mm) ± 80 - W-axis (mm) 1,050 - B-axis (degrees) -30 to +195 Rapid traverse rate (m/min) - X-axis (m/min) 38 - Y-axis (m/min) 26 - Z-axis (m/min) 38 - W-axis (m/min) 30 - C-axis (rpm) 400 Feed rate range - X / Z / Y-axis (mm/min) 0 – 8,000 Main spindle integrated spindle motor - Speed range (stepless) (rpm) 35 – 5,000 - Drive power (kW) 22 - Torque max. (Nm) 349 - Spindle nose A2 - 6 inches - Indexing (degrees) 0.0001 Second spindle - Speed range (rpm) 35 – 5,000 - Drive power (kW) 18.5 - Torque max. (Nm) 326 - Indexing (degrees) 0.0001 Driven tools - Speed range (rpm) 15 – 12,000 - Drive power (kW) 15 - Torque max. (Nm) 120 - Tool holder Capto C6 Tool magazine - Number of tool positions 40 - Tool weight max. (kg) 10 - Tool diameter max. (mm) 90 - with free secondary positions max. (mm) 125 - Tool length max. (mm) 300 - Tool change time (sec.) approx. 1.3 sec Connected load 62 kVA Operating voltage 400 V / 50 Hz EQUIPMENT FEATURES Crjdpfs Ahynksx Aiiji + Coolant tank capacity 220 liters + Chip conveyor, hinged belt design, discharge to the side + Automation alphaMAX ++ Industrial robot designation Motoman NX 100 ++ Number of axes 6 ++ Load capacity 20 kg ++ Positional repeatability ± 0.06 mm DIMENSIONS and WEIGHTS Machine weight (kg) approx. 10,200 Machine footprint (mm) 3,820 x 2,060 Subject to changes and errors in technical data and specifications.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm Codjzx Nw Topfx Aiieri

Condition: used, Sicko return conveyor for returning workpieces to the operator after processing on (for example) multi-blade saws or planers. Compatible with the multi-blade saw (1328-400217). Technical data: - Length: approx. 6,000 mm Crsdpfx Aijztvu Usisi - Width: approx. 2,900 mm - Height: approx. 780 mm - Workpiece length: max. approx. 4,000 mm - Workpiece width: max. approx. 900 mm

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Credpfx Aio Ahmuweiji Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: used, Year of construction: 2011, bar material dia. 20 mm spindle passage 34 mm turning length 200 mm turning speeds 10000 U/min c-axis 0,001 ° Grad gripping station 20 turning length 50 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 9+7+4 =20 number of milling stations 4 control Mitsubishi Meldas Number of axles 5+2x C Achse St. chip conveyor ja/yes Knoll Number of working hours 5000 h total power requirement 3,7 kW weight of the machine ca. 2.550 kg dimensions of the machine ca. 2,1 x 1,2 x 1,8 plus FMB m Citizen A20-VIIPL CNC swiss type lathe, built in 2011 with FMB Minimag 20 loading magazine, In very good condition! Regularly serviced by Citizen. The machine has been operated in 3 shifts, 5 days a week. Several Citizen A20-VIIPL machines are available. Reason for sale: The project has now come to an end. Codpfo Ah T Uhjx Aiisri Several Citizen A32-VIIPL machines are also being sold. Year of manufacture: 2011 Reason for sale as above. Take this opportunity to enquire about package prices. Go to the Citizen A32-VIIPL page on the website Accessories: 1x main and take-off spindle (diameter). 1x channel for FMB Standard oil and chip containers Translated with (free version)

Condition: used, functionality: fully functional, machine/vehicle number: 3279C, SECOND-HAND CONVEYOR BELT FOR PIECES RETURN Cjdpfsx Rn T Tjx Aiisri - S/N 3279c

Condition: used, Year of construction: 2008, Due in at the end of November, so photo'd on site...more pictures will be available on arrival in our showrooms. 2008 MAZAK Nexus 200-II M with driven tools, C-Axis, barfeed, swarf conveyor, parts catcher and tool setter. - Maximum Swing: 675 mm (26.57 in) - Maximum Machining Diameter: 380 mm (14.96 in) - Maximum Bar Material Capacity: 74 mm to 76 mm (2.91 in to 3.0 in) - Maximum Turning Length: Available in two distinct bed lengths:500U Specification: ~538 mm max turning length - 1000U Specification: Up to 1,000 mm max turning length Codpfxj Ah Ik Ss Aiieri Spindle & Turret Specifications The machine pairs a high-torque main turning spindle with an integrated milling drive inside the tool turret. Features Main Spindle, Rotary / Milling Turret Spindle Speed Range 35 – 5,000 RPM, Motor Power 26 kW (35 HP), Driven tool Motor 5.5 kW (7.5 HP), Spindle Nose / Bore A2-6 / 76 mm Turret Capacity 12 Tools (all can be live) Spindle Indexing (C-Axis)0.001° Increments - Physical Machine Metrics Rapid Traverse Rates: 30 m/min (X-axis) / 33 m/min (Z-axis) - Machine Approximate Footprint (500U): ~2,430 mm (L) x 1,800 mm (W) x 1,780 mm (H) - Machine Net Weight: Approximately 4,900 kg (10,800 lbs)

Condition: used, Year of construction: 2001, Drive rolls, return rolls, conveyor belts, belt curves various dimensions RA2010 Various drive rollers and idlers for conveyor belts and belt curves in different lengths, angles and diameters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Codpfx Aiek Abtwjisri For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: Cjdpfxomu Rtuo Aiisri approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *

Condition: used, Year of construction: 2008, - with workpiece return - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Feed rate max: 20 m/min - with groove milling unit One: Edge banding machine with return Manufacturer: Brandt Type: KDF 991 Year of manufacture: 2008 Workpiece return Manufacturer: Ligmatech Type: ZHR 05 Boomerang Year of manufacture: 2007 Technical data - Right-hand machine - Machine length: 8,260 mm - Ligmatech ZHR 05 length: 10,460 mm - Edge thickness max: 20 mm - Board thickness: 8-60 mm - Thickness of wound edge max: 3 mm - Workpiece width min: 60 mm - Feed rate max: 20 m/min - Stepless feed: material pressure zone adjustable via servomotor Cjdpfxjzuyp Se Aiiori - Electromotive height adjustment - Infeed stop: adjustable via servomotor - Infeed stop for thin elements - Glue system for granules: glue pot above the feed chain - BRANDT glue system QUICKMELT QA 45 - Suitable for PUR adhesives - Magazine for single strips - Spray device, front, cleaning at the rear - Pre-milling unit - Preheating zone - End trimmers: 2 motors, pneumatically adjustable - Flush trimming: top + bottom, manually adjustable - Fine milling trimming unit: 2 motors, adjustable via servomotor R2 - Edge rounding unit: 4 motors, manually adjustable - Groove milling unit: manually adjustable with tilting function - Radius trimming blades: R2, pneumatically adjustable / Second set for R1 included - Flat trimming unit - Glue joint trimming blade - Cleaning fluid spray at the rear - Buffing unit - Solid wood edge sanding unit - Conformity marking: Including complete documentation and CE