Used Turning Tensioner for sale (9,230)

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, fanuc 18ITB Kodpfx Ajx Irzvjffonf Workpieces diameter 130 mm, length 110 mm Spindle speed 7,500 rpm Turret with 12 stations Max. tool speed 6,000 rpm Power 24 kW

Year of construction: 2014, condition: good (used), functionality: fully functional, We are offering the Nutek model NTM310-CXL. This is a turning station/inverter. The PCB length can be adjusted by handwheel from 80 mm to 460 mm, and the PCB width from 75 mm to 460 mm. Removable drip tray made of stainless steel. The running direction is from left to right. The item is currently located in Satu Mare, Romania; upon purchase, the system can also be relocated to Germany. Knjdpfx Afoxgc N Sjfsf We will be on company holiday from 19.12.2025 to 06.01.2026. From 07.01.2026, we will be available for you again.

Condition: excellent (used), Year of construction: 2015, operating hours: 11,100 h, functionality: fully functional, machine/vehicle number: NTX1150102, Year 2015 with F31iB5 control and CELOS Country of manufacture: JP Voltage: 380V/50Hz/3ph Dimensions: 4169x2543x2543 mm Net machine weight: 10,000 kg TECHNICAL SPECIFICATIONS Control: Fanuc F31iB5 with CELOS Main spindle: X1 axis: 455 mm Y axis: +/- 105 mm Z1 axis: 800 mm (+165 for ATC) B axis: 240° Turret 2: X2 axis: 160 mm Z2 axis: 730 mm Spindle 1 / Spindle 2: C axis: 360° / 360° Tailstock: A axis: 820 mm Kjdpfow T Snfjx Affjnf Max. distance between centres: 1,050 mm Max. turning diameter Main spindle: Ø 430 mm Turret 2: Ø 274 mm Max. turning length: 800 mm Bar diameter: Ø 52 mm . Ø 65 mm Unless otherwise specified or in case of errors or omissions, the technical data is provided without commitment.

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) Knsdpfoc Ux Tmox Affef 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Year of construction: 2014, operating hours: 13,252 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D SL Main Drive Number of axis 2 Spindle Speed 4000 RPM Spindle motor power 17.5 kW Ksdex E Eaajpfx Affenf This DMG CTX 450 V3 horizontal turning machine was manufactured in 2014. It features a Siemens 840D SL CNC control, a 12-position VDI 40 tool turret with driven tools, and a high-torque main spindle. The compact design includes side chip discharge and a heavy-duty hydraulic tailstock. Ideal for high-precision turning, it also has a bar machining capability with a maximum bar diameter of 65 mm. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2001, operating hours: 62,911 h, functionality: fully functional, turning length: 2,000 mm, turning diameter over cross slide: 455 mm, turning diameter: 680 mm, CTX 600 E Year of manufacture: 2001 Control: Heidenhain Pilot 3190 Operating hours: 62,911 Working area: Centre distance: 2,000 mm Swing diameter over bed cover: 680 mm Swing diameter over cross slide: 455 mm Cross travel: 320 mm Longitudinal travel: 2,000 mm Tool turret: Number of stations: 12 Mounting: VDI 50 DIN 69880 Driven tools: No Headstock: Spindle nose Ø: 220h5 mm flat flange Front bearing diameter: 140 mm Spindle bore: 107 mm Max. chuck diameter: 315/400 mm Drive power, 100% duty cycle: 30 kW Max. torque: 650/2,000 Nm Spindle speed range: 4 – 2,800 rpm Feeds: Cross slide: 5,000 mm/min Kjdpfxsx Il Nge Affonf Longitudinal slide: 5,000 mm/min Rapid traverse X axis: 24 m/min Rapid traverse Z axis: 30 m/min Max. feed force X axis: 8 kN Max. feed force Z axis: 15 kN Tailstock: Quill diameter: 120 mm Quill stroke: 120 mm Taper: MK 5 Hydraulic steady rest, make SMW type SLU-5, clamping range 50 – 310 mm Hydraulic 3-jaw chuck, make Schunk Rota THW 120 400 Extraction unit by ifs - Industriefilter Chip conveyor by Bürener Maschinenfabrik Hydraulic unit replaced 2 years ago with new unit from Hawe

Condition: not inspected (used), Year of construction: 2005, turning length: 1,040 mm, turning diameter over cross slide: 420 mm, turning diameter: 520 mm, rotational speed (max.): 3,000 rpm, Fanuc 18I TB C axis SMW Autoblok chuck 12-position turret live tooling Knjdpfx Afex Iryxofsf chip conveyor

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, Kedpfx Aexcbktjffjnf A machine video from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Knedeht Hg Dopfx Affjf Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel Kjdpfxoc Ux Tlj Affsnf 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Year of construction: 2022, operating hours: 2,047 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D SL with ShopTurn Main Drive Number of axis 3 Spindle Speed 4000 RPM Knedpfxjx E D Uvj Affef Spindle motor power 25.5 kW This 3-axis DMG CLX 450 V6 was manufactured in 2022. It features a Siemens 840D SL control, a main spindle with a maximum speed of 4000 rpm, and a counter-spindle reaching 5000 rpm. The machine includes a 12-position servo turret with driven tool stations and a Y-axis stroke of ±60 mm. If you are looking to get high-quality turning capabilities, consider the DMG CLX 450 V6 machine we have for sale. Contact us for more information. Application Types Turning

Condition: new, weight max. 5000 kg table turning speeds 6.0 - 60.0 m/h roll diameter 250 mm Wheel width 120 mm workpiece diameter 250 - 2800 mm total power requirement 0.75 kW weight ca. 300 kg range L-W-H ca. 4165 x 1360 x 1200 mm Stable turning The HGK_Series has two synchronously working drive units that are used for Kjdpfx Afexab Awsfsnf ensure continuous rotation with stepless speed control. Of the Roller spacing can be increased and decreased manually using locking pins to achieve a large diameter range of the workpieces. Characteristics: - For rotating and positioning - in the field of machine, container, plant and pipeline construction - Two synchronously running drive motors - Adjustable rotation speed. - PU castors - Adjustment is via bolts - Remote control Scope of delivery: - 1x controller - 1x driven unit - 1x traveling unit

Condition: used, Year of construction: 2013, Control Heidenhain iT Plus Dimensions (L x W x H) 6,55 x 3,46 x 2,40 m weight of the machine 14.500 kg --> Technical details Operating hours: 43,506 h --> Spindle hours: 25,244 h --> Spindle box left: --> Chuck diameter: 315 mm --> Spindle flange diameter: 1705 mm --> Spindle bore: 104 mm --> Spindle diameter in front bearing: 130 mm --> Drive power (100% duty cycle): 25 kW --> Drive power (40% duty cycle): 32 kW --> Torque (100% duty cycle): 280 Nm --> Torque (40% duty cycle): 360 Nm --> Speed range: 0–5,000 rpm --> Speed of C-axis: 2,000 rpm --> Spindle box on the right: --> Chuck diameter: 315 mm --> Spindle flange diameter: 1,705 mm --> Spindle bore: 87 mm --> Spindle diameter in front bearing: 130 mm --> Drive power (100% duty cycle): 25 kW --> Drive power (40% duty cycle): 32 kW --> Torque (100% duty cycle): 280 Nm --> Torque (40% duty cycle): 360 Nm --> Speed range: 2,000 rpm --> Right spindle housing: --> Chuck diameter: 315 mm --> Spindle flange diameter: 1705 mm --> Spindle bore: 87 mm --> Spindle diameter in front bearing: 130 mm --> Drive power (100% duty cycle): 25 kW --> Drive power (40% duty cycle): 32 kW --> Torque (100% duty cycle): 280 Nm --> Torque (40% duty cycle): 360 Nm --> Speed range: 2,000 rpm --> Slide 1: --> Longitudinal travel: 1,200 mm --> Cross travel: 490 mm --> Vertical travel Y: ±100 mm --> Slide 2: --> Longitudinal travel: 1,200 mm --> Cross travel: 195 mm --> Slide 3: --> Longitudinal travel: 1,200 mm --> Turning/milling spindle: --> Tool holder: Capto C6 --> Spindle speed: 12,000 rpm --> Drive power (100% duty cycle): 20 kW --> Drive power (40% duty cycle): 22 kW Kjdpfexpizgox Affonf --> Torque (100% duty cycle): 79 Nm --> Holding torque, locked: 1,000 Nm --> Swivel range: ±110 degrees --> Tool magazine: --> Number of tools: 120 --> Max. tool length: 300 mm --> Max. tool diameter: 80 mm --> Max. tool weight: 7 kg --> Tool carrier 2: --> Number of tool stations: 12 --> Shank diameter according to DIN 69880: 40 mm --> Number of driven tool stations: 12 --> Max. speed: 4,000 rpm --> Max. power: 11.3 kW

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. Knsdoxcbkmspfx Affjf The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Knodpfx Afow T Sn Ejfef Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) Kedpfxsd Siyds Affenf To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 11000 kg Measurements height 3100 mm Control Unit Brand FANUC Model Series 0i-TD Dimensions Machine Length 2750 mm Kedpex E Egmofx Affjnf Main Drive Spindle motor power 30 kW Number of axis 2 This DEFUM KNA-110 S0 vertical turning machine was manufactured in 2016. It features a maximum swing with upper support of 1350 mm and a table diameter of 1100 mm, supporting workpieces up to 4000 kg. The table speed range is 6.3–200 rpm with 16 speed steps. Main motor power is 30 kW. If you are looking to get high quality turning capabilities consider the DEFUM KNA-110 S0 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2002, weight max. 10 / 20 (einzeln / Satz) t workpiece diameter Ø250 - Ø4600 mm gear diameter 380 mm turning speed drive gear steples 130 - 1300 mm/min total power requirement 2x 0,75 kW weight of the machine ca. 750 kg / 500 kg Steel rollers, dia. 380 mm Knjdpfewg Hprjx Affof Idle rollers with motor driven displacement of rollers Continously variable speed of drive rolls

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 400 mm, turning diameter: 60 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main spindle Ø 60 mm Counter spindle Ø 42 mm Kodpfjx Ez Ndox Affonf 2 turrets with 14 stations each Milling spindle on upper turret LNS Hydrobar – bar feeder

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Kedpfjxb Efrex Affsnf Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: excellent (used), Year of construction: 2014, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: 3325, Model S-191FTL-PRM Ø 50 mm Axis travel Milling vertical axis Z = 200 mm Milling transverse axis Y = 200 mm Milling longitudinal axis X = 410 mm Power / Thrust Z-Y 2.5 kW / 550 daN X 4.5 kW / > 550 daN X-Y-Z Traversing speed: 40 m/min Acceleration: 10 m/s² Resolution X-Y-Z: 0.0001 mm Measuring system: glass scale MAIN SPINDLE C (Horizontal turning axis) Power: 15 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm (option 50 mm) Turning spindle speed: 72,000°/min Clamping force, turning: 4,900 N at 6 bar B-AXIS SPINDLE INCLINATION (machining) Power: 4.3 kW Torque: 119 / 226 Nm Angular travel: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Locking torque: 200 Nm MACHINING SPINDLE Power: 8 kW Torque: S1 = 9.5 Nm / S6 = 11.5 Nm Max speed: 30,000 min-1 (option 40,000 min-1) Tool clamping force: 1,000 N Locking torque: mechanical locking with straight toothing Tool holder taper: HSK-40 (A or E) Through-spindle lubrication: 30 to 100 bar (optional) TOOL CHANGER Number of tools: 30 (option 60) Number of indexed tools: all Tool change time: 1.2 sec. Chip-to-chip time: 4.4 sec. Max tool diameter: Ø 40 mm (80 mm if adjacent station empty) Max tool length: 130 mm Max tool weight: 1.5 kg MISCELLANEOUS Installed power: 25 kVA Operating voltage: 3/N/PE/400V/230V 50 Hz Pneumatics: 6 bar (dry air) CNC CONTROL: Fanuc 31i Screen: 15'' color Keyboard: alphanumeric Control panel features: - 1 key switch for functions - 1 feedrate potentiometer 0–120% - 1 spindle speed potentiometer 50–120% - 1 quick-selection button for machine functions - 1 integrated electronic handwheel CNC Options - Data server with ATA Flash, 1GB memory capacity - J947 1 MB RAM memory - S677 TCPC (tool center point control for 5-axis machining) - S808 Al nano HPCC (Al high precision contour control II) - J930 tool tip radius compensation - J893 coordinate system rotation - J819 Helix (cylindrical) interpolation - J953 memory capacity for 1,000 programs - J828 tapping without compensation chuck - S615 insertion of radii and chamfers - J894 workpiece coordinate system - S993 part setup error - R522 inclined machining plane control with guidance Interfaces - Bumotec-specific programming to minimize collisions - Simplified tool management to prevent input errors - Tool management by threshold value, change according to part count or tool life - Automatic tool setting on machine for easier tool handling - Part counter and production management Y-AXIS (horizontal cross milling axis) Travel: 200 mm Power / thrust: 4.8 kW / 240 daN Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Z-AXIS (horizontal longitudinal milling axis) Travel: 400 mm Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Knsdpfx Aow T Sl Djffef Measuring system: glass scale Includes 8kW cooling unit Emergency braking system integrated Subject to errors and omissions, technical specifications are provided without obligation.

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Kedox Ih Dgepfx Affenf

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 2223 kg Main Drive Number of axis 2 Spindle Speed 1800 RPM Spindle motor power 7.5 kW Movement X-Axis Movement 203 mm Knjdpfjx E D U Nsx Affjf Z-Axis Movement 762 mm This HAAS TL1 was manufactured in 2020. A robust horizontal turning machine featuring a swing diameter over front apron of 508 mm and a maximum cutting length of 762 mm. It supports a spindle speed up to 1800 rpm with a maximum torque of 146 Nm at 355 rpm. Ideal for detailed turning operations. Contact us for more information about this machine. Application Types Turning

Year of construction: 2004, condition: ready for operation (used), General Data Measurements width 1600 mm Machine weight 3000 – 3500 kg Measurements depth 2500 mm Main Drive Spindle speed range 4000 Spindle motor power 7.5 kW Spindle bore 52 mm Number of axis 2 Kedpfsx E Eczsx Affsnf Workpiece Workpiece drm over bed 520 mm Workpiece drm over support 310 mm Turret Number of turrets 1 Tools Number of station 8 or 12 This ECOCA SJ-20 was manufactured in 2004. A robust horizontal turning machine featuring a swing over bed of approximately 520 mm and a max turning length of 500 mm. It includes a spindle speed of up to 4,000 rpm and a powerful 7.5 kW spindle motor. Ideal for precision turning, it also offers an 8 or 12-station turret. Footprint approximately 2.5 m x 1.6 m. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 1990, Main Drive Spindle motor power 115 Kw Number of axis 2 Additional Equipment Chip Extractor Complete Enclosure Cooling System Work Light Ksdpfxex E Ebke Affjnf Self-Centering Chuck Diameter: 2500 mm (removable) Refrigerated Electrical Cabinet This KOLOMNA 1532T vertical turning machine was manufactured in 1990. It features a robust design suitable for a variety of turning operations. If you are looking to get high quality turning capabilities consider the KOLOMNA 1532T machine we have for sale. Contact us for more information. Application Types Turning