Used Tube Straightening Machine for sale (92,346)

Condition: good (used), number of straightening rollers: 23, product height (max.): 15 mm, Manufacturer: SCHUBERT Type: WMP 63/600 Year of manufacture: 1974 Total 23 rolls Upper rolls 11 units Lower rolls 12 units Vario speeds 5 - 15 m/min Max. surface torque at 40 kg/mm2 3500/1800 Minimum workpiece length 130 mm Max. roll spacing vertical 16 mm Central lubrication Length infeed table 400 mm Specifications Metric US Standard Roll width 650 mm Sheet thickness at 5 x upper roll Ø 15 mm Upper roll Ø 63 mm Lower roll Ø 63 mm Number of rolls 23 Bending speed 3 - 15 Number of driven rolls 23 Dimensions (estimated) Length 2400 mm Width 2300 mm Height 1900 mm Weight 6000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend you verify all important details. Iodpfx Afjwpkxcjisbc

Condition: new, functionality: fully functional, Year of construction: 2025, Tube end processing machine, axial tube processing, tube end forming machine, tube end processing, axial tube forming, tube forming machine, expanding, reducing, expanding machine, reducing machine, beading, flaring Ibodpfewvq Svjx Afioc

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H ECO - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller Isdpfx Afshmbh Hsiebc - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x650x1070 mm - colour RAL5012 / RAL7015

Condition: used, Mandrel Tube Bending Machine 42 Ibsdpfx Afjwnrt Soiec Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling flame straightening -Drainage channel and water pump -Roll diameter: Ø 180 mm Ibedpfx Afjcp Nvysiec -Drive: PIV gearbox -electric: adjustable -Load capacity: 1 to -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Hand switch -Counter bearing: laterally adjustable -Dimensions drive: 3600/820/H850 mm -Dimensions counter bearing: 2950/820/H850 mm -Own weight: 1300 kg

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Iedpfxjt R Tgis Afiobc Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: used, functionality: fully functional, Year of construction: 2006, degree of automation: semi-automatic, pipe diameter (max.): 30 mm, Well-functioning tube bending machine with double bending blocks. fully adjustable Ijdpfxowtgydj Afijbc single bending blocks present

Condition: new, functionality: fully functional, Year of construction: 2025, Tube bending machine, CNC bending machine, tube bender, tube bending system, tube processing, tube technology, right-left bending, 3D tube bending, servo-electric, multi-axis bending machine, mandrel bending machine Capacity: -Round tubing mild steel S235 22 x 2,0 mm Ø -Round tubing stainless steel 1.4571 22 x 1,5 mm Ø -Max. moment of resitance 0,5 cm³ (S235) -Bending angle up to 180° + 10° spring back -Speed of bending axis max. 300°/sec. Ijdpfx Afewvqgtoiobc -Speed of front feed axis max. 1800 mm/sec. -Speed of rotation axis max. 600°/sec. -Repetition tolerance bending +/- 0,05° -Repetition tolerance length +/- 0,05 mm -Repetition tolerance rotation +/- 0,05° -Radius max. 66 mm -Bending height 1150 mm -Boosting force length positioning 2,5 kN -Power bending axis servo-electric -Automatic positioning rotation/ length servo-electric -All other axes servo-electric (e.g. clamping, mandrel forwards/ backwards, etc.) -Positioning of the bending heads servo-electric -Positioning of the pressure die (radial) servo-electric -Pressure die movement (axial) servo-electric -Material clamping (chuck) pneumatic Machine equipment-/basic accessories: -Bending head for bending right-hand and left-hand with one off set bend device -Bending head can be positioned horizontal and vertical, including rotation axis for change of bending direction (right- or left-hand) -Positioning of bending head via combined diagonal and rotation axis, this allows bending right- and left-hand in one operation -Bending direction free programmable, changing right-/left-hand for one tube geometry -Each bending head can be equipped with minimum two tool sets, e.g. with different bending radii or form-clamps, max. changing height for standard machine is 50 mm -Max. difference of bending radii for each bending level 1,5xD -With hollow shaft for using tooling for small radii -Minimum clamping length on the tube end, because of wide opening pressure die which allows the off set bend device to move directly behind the bending tool -Chuck for use of segment collets Depending on the contour of the clamping segments, already formed tube ends can be clamped -Material clamping in the VWE pneumatic -Footswitch to open or close the collet in the offset bend device, for easy loading and unloading -Following pressure die for bends up to 180° (for radii up to max. 2xD, for lager bending radii the pressure die can be repositioned to ensure a constant contact up to 180° bending angle) -For a correct positioning of the mandrel the machine is equipped with a mandrel support -Automatic, programmable mandrel withdrawal -Minimum quantity lubrication for automatic mandrel lubrication, adjustable lubricant quantity, can be used from inner tube Ø 13.5 mm -Central lubrication for automaticall lubrication of all moving parts in the necessary cycle -Air conditioning for the electrical carbinet -Starting of operation via manual switch on the control panel -In manual mode, all functions can be operated by keyboard and mouse The machine is built according to the latest safety regulations -In order to comply with the CE guidelines, a safety barrier is required in addition (DB-SA...) -Colour RAL 7047 grey, RAL 3020 red Control description: -Control via Simatic PC IPC BX-32A, Xeon W-11155MLE

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm Ibjdpfx Afedx Nfwjiec The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, wire diameter range: 1,5 - 7,0 mm cutting length: max. 2.000 mm wire feeding speed: 5 - 120 mtr./min Ibjdpsc Ucxfjfx Afijc * machine is been complete new painted*

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, working range: 6,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We, Airtech Stickstoff GmbH, have been partners with Bodor Laser for 8 years. We offer customers cost-effective, up-to-date laser cutting machines that are economically viable. Comprehensive service as well as system setup with our own service team. German-language training is also part of our services. Top quality at top prices. - Operable with or without loading system; here you have two options: fully automatic with bundle storage or a semi-automatic that can transport several rods of long material. - Simple programming. - 3 machine types with tube diameters up to 120 mm-350 mm available Iedpfx Aowra Dyefiobc - Laser power up to 12 kW.

Condition: used, Year of construction: 1985, machine/vehicle number: 30522, sheet width:120 mm coil weight:75 kg Ijdpfx Ascxxq Sofijbc dimensions of the machine ca.:2,50 x 1,25 x 1,50 m

Condition: used, Technical details: band width: 80 mm plate thickness: 1,5 mm number of rolls: 5 total power requirement: 1,2 kW weight of the machine ca.: 150 t space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D. * Isdpfx Aeu Ic E Rsfisbc

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. 1) BAR PEELING MACHINE CALOW, Germany – Type 125 mm Fully retrofitted in 2021 (completely new mechanics and electronics) Technical data: Working range: Ø 30 – Ø 125 mm Bars length: 2.5 – 9.5 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system (hydraulic) - Peeling head with 4 knifes - Rear guiding system (hydraulic) Bar extraction carriage Main motor and transmission Automatic knife positioning Control panel “Siemens Panel” HMI with digital display Output pressing rolls - tween Ibjdpfswqb Scjx Afioc Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of 6 modules. 2) BAR STRAIGHTENING MACHINE DAHLAHOUS, Germany – Type 135 mm Fully retrofitted in 2018 (completely new mechanics and electronics) Working range: Ø 28 – Ø 140 mm final processed thickness 3-roll technology. Rolls with axial movement for different sizes Overall length 6 – 8 meters. Rolls: Suitable for peeled and unprocessed (black) bars. Composition of the bar straightening machine line: Loading table with automatic bar feeding. Main machine body with control panel. Output table with automatic unloading onto a bundling conveyor. The offer includes careful dismantling and loading on transport at the location. There is an opportunity for an additional agreement for the installation of the equipment and commissioning at the client’s site with an operational warranty up to 12 months.

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Iedpfx Aod Tt Atjfiebc Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: good (used), All information without guarantee. Isdofd R Ahepfx Afiobc A demonstration is at any time possible in our showroom.

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm Ibsdpfx Aovtgn Nsfijc bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm Ibodpfxjh Ra Spo Afijc coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.

Condition: used, functionality: fully functional, Durmazlar HAP 3080 Plate Bending Machine. Strength: 80 T Folding length: 3000 mm Isdpfx Asv R Ikysfiebc Distance between uprights: 2520 mm CNC: Durma Throat: 350 mm Vertical stroke: 135 mm Working speed: 8 mm/s Axis number: 3 Good working condition. Please check out our other listings as well.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 20037E2006, total width: 700 mm, total length: 700 mm, total height: 1,540 mm, type of input current: three-phase, filling weight (max.): 250 g, filling weight (min.): 5 g, compressed air connection: 6 bar, overall weight: 500 kg, year of last overhaul: 2025, Used Axomatic AXO 700 tube closing machine suitable for filling and closing aluminium tubes. Method: Ijdpfswnrrbjx Afiebc This machine automatically fills the tubes, closes the aluminium tubes through 4 folding stations, puts a code in the seal and automatically ejects the tubes. The tubes are fed and oriented manually. This machine is set up in our showroom where we are happy to demonstrate the machine. Contact us for an appointment. Technical details: - Min/Max diameter aluminium tubes: 13 – 42 mm. - Tube length from 60 to 250 mm. - The tube holder with tube is lifted 55 mm over the filling pipe during filling. - Min/Max dosage: 5 – 250 ml. - The dosage quantity can be set outside the machine and can be read on a counter. - Capacity: max. 1,200 tubes/hour (mechanical speed). The actual achievable capacity is partly dependent on the operator, the tube quality and the viscosity of the product to be filled. - Electric drive by means of an electric motor of 0.37 kW, 380 Volt, 50 Hertz. - All product contact parts are made of stainless steel 316, suitable for pharmaceutical and cosmetic products. - Rotating table, adjustable in height, with readout of the set heights. - No tube/no filling device. - Coding unit for the tubes - Automatic ejection device for the tubes. - 7-station table. - Standard hopper with lid 55 liter capacity. - Machine frame and plating are made of stainless steel and is equipped with an anti-drip lock on the base, so that no product can enter the drive section. - Stepless speed control from the dashboard. - Security doors and casing made of stainless steel frame with plexiglass and door security. - Direct machine drive without chain. - Electric control box housed in the frame of the machine.

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Max. Tube diameter: Ø220 mm Laser power: 3 kW Ijdoq Tpkyepfx Afisbc Max. Dimensions of the square profile: 160 x 160 mm Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Length of the last piece: 4000 / 6000 mm Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Types of open profiles: L, U

Condition: new, Year of construction: 2025, DNE pipe and profile laser cutting machines (one of the best systems on the market) are characterized by a top price-performance ratio. The machines are robust, fast and dynamic in operation. You can choose between a semi-automatic and a fully automatic pipe loader. These machines are available with diameters of up to 240mm, 350mm and 520mm as well as 640mm. Laser outputs from 3 to 12 kW and lengths of up to 12 meters. A 45 degree laser cutting head is also available. We would be happy to make you an offer and are convinced that you will be satisfied. Our own German service team will accompany you from the installation of your laser cutting system to training. Iodpfeq U A U Uex Afijbc

Condition: used, Year of construction: 1974, sheet width:130 mm coil internal dia.:300 - 500 mm coil external diameter:1200 mm Ibedpfx Aocxxprofisc

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, pipe diameter (max.): 240 mm, workpiece weight (max.): 500 kg, total length: 14,000 mm, total width: 2,000 mm, total height: 3,000 mm, working range: 6,500 mm, Equipment: cooling unit, documentation/manual, Tube Cutting Machine DNE - Member of Bystronic group The fiber laser tube cutting machine DNE LASER D-TUBE F is an innovative product specifically developed for the profile and tube cutting market. It features precise control of tube support devices and chucks, offering exceptional performance. The machine is versatile in cutting materials and types, covering a wide range of applications, including carbon steel, stainless steel, aluminum alloys, and more. It can process different profiles such as round tubes, square tubes, U-channels, I-beams, and custom-shaped tubes for cutting, drilling, and contour cutting. It is a highly automated, efficient, and cost-effective tube cutting system. Description Laser power: 6000 watts Round tube: 15 - 240 mm Square tube: 15 x 15 - 240 x 240 mm Rectangular tube: 15 x 15 - 230 x 230 mm Max. positioning accuracy X,Y-axis: 0.05/1000 mm Max. positioning accuracy U-axis: 0.05/1000 mm Max. tube weight: 40 kg/m Max. tube weight: 500 kg Length: 14000 mm Width: 2000 mm Height: 3000 mm Ijdpfxewnbhrj Afiebc 40° cutting head Bevelcut Semi-automatic loading Exhaust system 7.5 kW Nesting software

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t Ibodpst Hmk Tjfx Afiec dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m