Mandrel tube bending machine

cesurbend PBH-32 E

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Nedpfjl Dw D Eox Affsdf Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Njdpfet Iklksx Affsdf Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: new, Year of construction: 2025, pressure 40 t stroke 250 mm table-size 625 x 1100 mm flat steel flat 200 x 20 tube diameter max. 2" table height 950 mm work speed 9,1 - 4,7 mm/sec return speed 45 mm/sec weight of the machine ca. 750 kg dimensions of the machine ca. 1,25 x 0,9 x 1 m total power requirement 3 kW quantity of oil 45 l New hydraulic horizontal bending press with stepless pressure regulation under load, patented tool holder, the BOTTOM cylinder allows 360° bends! Immersion depth and retraction point adjustable by handwheel,stepless feed adjustment. The machine is in the following sizes obtainable: pressure from 22 until 150 t, stroke from 200 until 450 mm. Many tools are in offer for the different kind of bending with additional price Ndjdpfx Aevx Dwrjffsf list. For more information please look at the video.

Year of construction: 2012, condition: excellent (used), Item: DP-05180 Rotary lobe pump JEC Type ZF -120-021 From 2012, Inlet 1,5", Outlet 1,5". Engine: 5.5 kW Ndjdpfxsh Inqio Affof Complete Stainless Steel

Condition: new, Year of construction: 2022, functionality: fully functional, input voltage: 400 V, ambient temperature (min.): 5 °C, ambient temperature (max.): 50 °C, ROBOTIC WELDING STATION ROBOARC_E WITH KUKA ROBOT ON POLE-ARM AND FRONIUS TPS 320I MT SOURCE - KUKA KR8 R2100 Arc HW robot. The robot uses a motion control system that compensates for the path of the torch, accelerates and decelerates, sets the travel speed and other coefficients. The robot can control multiple axes, divided into different groups. The groups of operations are independent of one another but can work simultaneously. - Fronius TPS320i CMT welding source Fronius TPS/i is one of the most modern welding sources, and with its huge power output of up to 320A, it meets the highest welding requirements for unalloyed steels, low-alloy steels, high-alloy steels and aluminum. Intelligent equipment, modular design and multiple options for system expansion provide the necessary flexibility and performance. - ROBOT CONTROLLER, PROGRAMMING PANEL (SMARTPAD) The SmartPAD is a hand-held programmer equipped with all the operating functions and indicators that are necessary to operate and program industrial robots. - ILLUMINATED STATION SIGNALING COLUMNS The signal column is located on the fence of the station. The column corresponding to Station A has 3 signal lights, i.e.: green, red and orange, as well as a beacon sounder, at station B it has 3 signal lamps, i.e.: green, red and orange. Ndedet Dxwmspfx Affef - CONTROL CASSETTES WITH ILLUMINATED BUTTONS The illuminated buttons of each station of the station inform about the activity of the of the operation being performed to which the illuminated button corresponds.

Year of construction: 2016, condition: excellent (used), Waukesha Lobe pump Model: 015 U1 Ndedpfxsgmtils Affof 2016, Stainless lobe pump with 100l hopper on mobile frame, variable speed, 60mm diameter outlet, 0.0142 Gal/Rev Max RPM800

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is an AMADA AE-2510 NT turret punch press from 2017. The machine is in very good condition, fully functional, and has been in continuous production and regularly serviced. This is an advanced machine for precise sheet metal processing, ensuring high quality and work efficiency. Technical Data and Features: Model: AMADA AE-2510 NT Year of Manufacture: 2017 Control: Easy-to-use AMNC controller with integrated software. Drive: Energy-efficient servo-electric drive, lowering operational costs. Precision: High processing precision due to a variable drive. Tooling: Fast tool changes (approximately 1.5 seconds on average). 51 tool stations. 4 AMADEX stations for automatic tool rotation at any angle. The turret rotates the shortest path for minimal tool change times. Minimizes setup time. Capable of using special tools, such as slitting tools. Construction: Robust, closed frame to minimize deformation under heavy loads, ensuring high accuracy, reduced vibrations, and extended tool life. Noise and Vibration Level: Reduced due to new servo drives. Ndjdpfx Aowp Ul Hoffof Machine Condition: Used, in very good condition, fully functional. It has been in continuous production and regularly serviced. Location: Ożarów Mazowiecki, Poland Additional Information: The offer does not include disassembly, delivery, or tools.

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. Nsdsqvm Ukepfx Affsdf - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm Ndsdpfxsvtgn Ne Affsf wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Max bendingradius: 180° Ndedpfx Afsxcqi Ejfsf